Glass Tubing Connector

Compare Tool

Select up to 3 products

Glass Tubing Connector
1 - 32 of 129
Sort
View
Show
  • Connectors, Tubing

    Ace Glass

    Small tubing connector comprised of a TFE, 1/4"-28 UNF 2B male nut and a Kel-F wedge insert. Designed for use with our 5838 Chromatography adapters, 1.5-2mm ID tubing won't slip off or blow out during vacuum or pressure applcations. Easily assembled wi

  • Scienceware® PTFE Thermometer Adapters

    Bel-Art - SP Scienceware

    …adapter has threaded cap with port to take thermometer, glass tubing or similar objects, up to 6 mm o.d. Viton® O-rings seal against thermometer and against mouth of body. Vacuum adapter has serrated Teflon tubing connector, 1/16 o.d. Connector screws into side of adapter and seals against Viton®…

  • Serrations are tooled on both ends of an 8" length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pieces tooled on both ends).

  • Safe-Lab® Joint Tubing Adapters

    Bel-Art - SP Scienceware

    …of glass tubing to be adjusted as required. An O-ring on the taper provides best sealing and the threaded polypropylene extracting nut ensures effortless removal. NOT autoclavable Safely and securely positions glass tubing in a 24/40 joint. Available for 8 and 10mm diameter glass tubing

  • Includes:  EzyLok Connector for 4mm Tubing  EzyLok 6mm Hose Adaptor  Nebulizer Hose Clip

  • Connecting Tubes

    GSC International, Inc.

    …length 14mm arm length "Y" Shaped Glass Hose Connector. Available in the following sizes: 1/4" (6mm) arm length 5/16" (8 mm) arm length 3/8" (10mm) arm length 1/2" (12mm) arm length Straight Connecting Tube 8mm od x 63mm length

  • EzyFit connector 0.75 mm ID x 1.3 mm OD x 700 mm long - Quantity 10

  • Disconnects

    Dynalon

    Quick Disconnects LDPE. These polyethylene quick disconnects are useful for joining tubing of glass, rubber, or plastic. Connectors fit tightly together. They are tapered to accommodate a range of diameters. Replaces expensive adapters.

  • pHE-04 Glass Combination pH Electrode

    labForce (a Thomas Scientific Brand)

    …samples (up to 225°F). The pHE-04 electrode adopts a Long-Life Reference System, which is composed of a glass tube, AgCl and a reference silver wire. The top end of the slim glass tube is stuffed with cotton, which prevents the reaction between AgCl and electrolyte when temperature changes.…

  • Glass standard taper joint adapters featuring a drip tip and right angle tee ground glass tube sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • …Packing Connector and the appropriate glass tube. Tricorn Packing Connector includes one packing connector and two EPDM O-rings. Packing connectors are available in three sizes for using different i.d. tubes: 5-5 is for 5-mm tubes on both sides; 5-10 is for a 5-mm tube on one side and a 10-mm tube

  • …end of the slim glass tube is stuffed with cotton, which prevents the reaction between AgCl and electrolyte when the temperature changes. It improves the stability of the reference electrode and extends the service life of the electrode. The electrode uses a BNC/RCA connector, compatible with all…

  • PHE-18 Glass Spear pH Electrode for Semi-Solid Samples,

    labForce (a Thomas Scientific Brand)

    Long-Life Reference System - The PHE-18 pH electrode uses a long-life reference system, composed of a glass, AgCl, and a reference silver wire. The top end of the slim glass tube is stuffed with cotton, which prevents the reaction between AgCl and electrolyte when the temperature changes. It…

  • …and facilitates joining plastic or metal tubing to Ace-Thred glass fittings and adapters. This adapter is supplied with one FETFE o-ring (-176 does NOT come with o-ring). Adapter is available in nylon, HDPE (High Density Polyethylene), or PTFE. -120 and -125 are PTFE, MNPT to FNPT connectors.

  • …enters column. Threads are #7 Ace-Thred for use with 5801-07 End Fitting. Usually positioned, in line, between pump and column using 1/4"-28 tubing connectors such as 5854, 5855 or 12724. Glass only is supplied. Fittings must be ordered separately. Filter material, such as glass wool, not supplied.

  • Tubing connector, used to connect flexible tubing (1/4", 3/8", 1/2", 3/4", 1"ID) to #7, #11, #15 or #25 Ace-Thred for easy, safe connect/disconnect. 5029/7506 Nylon bushing slides over serrated end and secures PP connector in thread with silicone O-Rin

  • …top end of the slim glass tube is stuffed with cotton, which prevents the reaction between AgCl and electrolyte when the temperature changes. It improves the stability of reference electrode and extends the service life of the electrode. The electrode uses a BNC connector, compatible with any…

  • Bushing connector for joining an Ace-Thred to a reduced end tube. Assorted bushing and o-ring materials.

  • Internal threaded bottom drip adapter with or without flow regulator valve. 1/4"-28 or NPT internal threads. Supplied with packing support and o-ring. For use with all Ace-Thred chromatography columns.

  • USP Class VI certified C-FLEX® tubing Accommodates both 2L and 4L bottles Male MPC connector with cap PureFit® tube clamp system Autoclavable *ADCF - Animal Derived Component Free **MPC - Medical grade Polycarbonate

  • …adjustable Inner Tube and Nylon Bushing with FETFE O-Ring. Available with optional threaded tubing adapters (-75,-78), or modified with #15 Ace-Threds on inlet/outlet for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach tubing to serrated end of…

  • …and FETFE O-Rings. Ultimate vacuum of 10 - 7 can be realized with standard three O-Rings. Supplied with Ace-Safe Serrated Connector for one end to connect vacuum line. Complete consists of Glass Manifold, End Plug with FETFE O-Ring, and "Ace-Safe" Connectors with bushing for tubing connection.

  • Adapters for joining jacketed reactor ball joint inlet/outlets to recirculator hoses. 28/15 and 35/25 sockets with various Ace-thred and tube ends.

  • Universal Inlet Adapters with Screw Cap

    Wilmad-LabGlass - SP Scienceware

    Borosilicate glass universal inlet adapters are capable of sealing thermometers, syringes, pipets, etc. Insert probes can be positioned within the apparatus by loosening the screw cap on top of adapter and tightening to create a seal. Bottom of adapter features a Standard Taper joint. Supplied as a…

  • …threaded connectors, available in glass or 18-8 type 303 free machining stainless steel. For use in place of ground glass joints on flasks, columns, etc. Threads offer positive pressure O-Ring seal when used with fittings like 5837, 5838, 5840-5846, and 7506. Size mm refers to I.D. of tubing below…

  • This product has a quantity of 10. Replacement connector and sample tubing for glass concentric nebulizers with EzyFit sample inlet.

  • Omni-Fit Valve NMR System

    Wilmad-LabGlass - SP Scienceware

    …coupler, and a vacuum connector Omni-Fit Sample tubes (507-OF-7) sold separately Additional septum (OF-30) are available in packages of 6 Due to the nature of glass, Extreme Caution should be exercised when using at elevated or reduced pressures as performance of tubes under pressure…

  • Y-Shaped Hose Connectors

    DWK Life Sciences (Kimble)

    Useful in connecting apparatus Glass Serrated tips hold tubing in place

  • Glass standard taper joint adapters featuring a drip tip and a right angle ground glass tube sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • …locknut. No need to over-tighten. Ace-Thred adapters feature a 1/4-28unf tap, with or without a 18-8 stainless Helicoil insert for durability. See our glass column product families, 5795 and 5820, our 5854 1/4-28unf tap tubing connectors, our 5814 and 5848 packing supports and our 12684 PTFE tubing.

  • Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on both ends of an 8" length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pieces tooled on both ends).

  • Used to construct small scale apparatus. Available in direct sealing or regular style. Serrations are tooled on both ends of an 8in length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs. tooled on both ends).

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.