Glass Tube With Screw Cap

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

KimCote® plastic-coated culture tube made from tubing with uniform wall thickness for maximum heat transfer and chemical resistance. Thread finish complies with Glass Packaging Institute (GPI) requirements. Cap is not attached. Designed from ASTM E982, Type VI, Class A requirements.

Screw thread tube for replacement on apparatus using the GL thread, which is manufactured to I.S.O. specifications. (GL is the I.S.O. designation for GLASS.) To be used with a CG-196 solid cap with liner or a CG-195 cap with aperture and CG-197 silicone sealing ring.

…complete with a Poly-Seal® polypropylene lined phenolic screw cap. TEST TUBE TONGS, Tongs are made of zinc coated steel, 6" overall length. Spring loaded jaw will hold a tube up to 1" in diameter. STOPCOCKS, STRIAGHT BORE, GLASS PLUGS, 1-ARM LARGER, Similar to CG-400, but with…

…enamel Made with heavier walled tubing to withstand higher centrifugation speed Top has a screw thread finish Autoclavable cap with rubber liner is included but not attached Replacement cap is 45066B Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP…

Tubes with round bottoms are manufactured from ASTM E438 Type 1 Class A Borosilicate 3.3 glass. Includes polypropylene autoclavable screw cap with PTFE liner.

Screw thread tube for replacement of apparatus using the SVL® series of glass threads. For use with a CG-188 solid cap with PTFE liner or a CG-189 open top cap and sealing ring for use as a tubing connector. Threads are tooled on one end of a 6in length of tubing.

These standard round-bottom culture tubes are manufactured from 51 expansion borosilicate glass that conforms to ASTM Type I, Class B and USP Type I requirements. The tubes can be reused many times. The caps have a white 14B styrene-butadiene rubber liner or a PTFE faced 14B styrene-butadiene rubber…

…Mini-Mills. Adapter: Plastic screw cap, size 58, with metal coupler of square cross-section to fit bottom of delivery tubes of Wiley® Mini-Mills. Fits threaded containers such as 4 ounce (120 mL ) 6180H19 jars, which are supplied with the mills. Broached cap to take removable coupler is…

…sealing thermometers, syringes, pipets, etc. Insert probes can be positioned within the apparatus by loosening the screw cap on top of adapter and tightening to create a seal. Bottom of adapter features a Standard Taper joint. Supplied as a complete assembly with a screw cap and Viton® O-ring.

…strong borosilicate glass. Supplied with PTFE-lined Polypropylene Screw Caps, tubes are easy to seal. Flat bottoms and ultra-high clarity. Ideal replacement for Biju/Bijou, McCartney, and culture or media bottles. Borosil® Heavy Duty Culture Tubes with Flat Bottoms are available…

…use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular trays. Supplied without caps. 73800, 73802 and 73805 for caps.

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

…contribute to stability 73770 series items are produced with a round bottom Modular trays are shrink-wrapped in plastic film Supplied without caps No marking spot Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Now, sample tubes and storage vials have been joined! Save time and money with the Screw Cap EPR Tube; each come with a PTFE/Silicone Septum.

…Replacement cap for 0493K43 & 0492Y27 is 45066B Replacement cap for 1215F92 is 45066C 1215F92 is a large-capacity, 100mL tube with screw thread closure Manufactured to the specifications found in ASTM 2158 Manufactured from 33 expansion, low extractable borosilicate glass conforming…

Deep form, of black phenolic resin with cemented rubber liner. As supplied with 4893D11 series Flasks and 9210E23 series Test Tubes. Can be autoclaved for 20 minute periods at 121°C. Rubber liners have been found to be satisfactory for tissue culutre. Cap size shown is GPI thread finish.

Round bottom, with threaded neck; without marking spot Size 100 x 13 mm takes size 13-415 cap; other sizes take size 15-415 cap Cap is not supplied and must be purchased separately; see 9215F70 series Cases of 1,000 contain 4 packages of 250. Listings indicate length x o.d. in mm.

…control of spray Borosilicate glass tube has permanently attached, molded phenolic screw cap (size No. 24) with polyvinyl liner which fits commercial narrow mouth bottles Complete with spray tube, screw cap and 240 mL clear glass bottle (1702F61) Takes 1/4 inch i.d. rubber tubing

… 2D-barcodes readable without removing tubes from racks Manufactured from chemically-inert glass with low binding and low static properties, customized PTFE inserts available as an option for aggressive chemical Securely sealed using screw caps Overview Developed to exceed the…

…outside diameter is 17 mm and the overall length is 120 mm. Strength you can rely on Polypropylene tubes withstand up to 5400 × g and are appropriate for use with stronger acids (except oxidizing acids) or alkalis, alcohols, organic solvents, chlorinated and aromatic hydrocarbons…

…in one container. They are also useful for other clinical and microbiological tests. Screw caps resist the effects of temperature and steam. These tubes have a white polypropylene GPI 38-400 threaded cap with a Polytetrafluorethylene (PTFE) liner. For replacement caps, see No. 1261-CO (1234B29).

…strong borosilicate glass. Supplied with PTFE-lined Polypropylene Screw Caps, Borosil® Culture Tubes are easy to handle and seal. Round bottoms and ultra-high clarity. Ideal replacement for media and culture bottles. Borosil® Heavy Duty Culture Tubes with Round Bottoms are…

…contamination. Since these caps are vented, the flasks can be autoclaved with the cap attached.Please Note: Glass Shake and Fernbach flasks are not designed for use with a SOLID screw cap for culture of anaerobic microorganisms. (Pressure resistant bottles, flasks or tubes are recommended).

…with a TFE/propylene O-ring and a polypropylene screw collar. The connecting threads on the top of the cap use standard 1/4-28 flangeless fittings. Two of the ports have 1/8” through holes and one has a 1/16” through hole. Flat bottom reservoir is manufactured from Type I, Class A borosilicate glass…

2 mm glass stopcock. The side-arm accommodates a septum (use Z565695 or Z565679). Designed for small-scale manipulation of air and moisture-sensitive reagents. Thermoplastic screw caps with Viton O-rings usable to 140C. Synonyms: storage tubes; tube flask; tube storage

Borosil® Amber Reusable Heavy Duty Culture Tubes are constructed from low-extractable, mechanically strong borosilicate glass. Supplied with PTFE-lined Polypropylene Screw Caps, tubes are easy to handle and seal. Flat bottoms and ultra-high clarity. Ideal replacement for…

Commonly used in sample degasification these tubes can maintain vacuum quality of >10-4 torr. For better vacuum, please check our Pressure/Vacuum Tube and Quick Pressure Valve Tube. Tube comes complete with open top screw cap and septum. Caps and septa can be ordered separately.

Borosil® Amber Reusable Heavy Duty Culture Tubes are constructed from low-extractable, mechanically strong borosilicate glass. Supplied with PTFE-lined Polypropylene Screw Caps, Borosil® Culture Tubes are easy to seal. Round bottoms and ultra-high clarity. Ideal replacement for…

…at 121°C. Since these caps are vented, the flasks can be autoclaved with the cap attached. Please Note: Glass Shake and Fernbach flasks are not designed for use with a SOLID screw cap for culture of anaerobic microorganisms. (Pressure resistant bottles, flasks or tubes are recommended).

Manufactured from 5.1 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements, these test tubes are great for any lab. Each tube has a marking spot and reference mark for orientation during use and a threaded neck to accept screw cap, not included.

Body is constructed of glass-filled PTFE with a vacuum adapter for 1/4” ID tubing Upper screw clamp holds a solvent pickup adapter or funnel 40-60 micron porosity fritted glass filter support is removable Supplied with a PTFE/propylene o-ring