Glass Test Tube With Caps

…outside diameter is 17 mm and the overall length is 120 mm. Strength you can rely on Polypropylene tubes withstand up to 5400 × g and are appropriate for use with stronger acids (except oxidizing acids) or alkalis, alcohols, organic solvents, chlorinated and aromatic hydrocarbons…

…culture tubes and flasks with DeLong style necks or ports. The caps are molded from durable, autoclavable polypropylene (PP). They are available in a full range of five sizes and five colors for easy sample identification and organization. Recommended tube diameter is indicated on each cap. …

…but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass, sold without caps and bulk…

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

Round bottom, with threaded neck; without marking spot Size 100 x 13 mm takes size 13-415 cap; other sizes take size 15-415 cap Cap is not supplied and must be purchased separately; see 9215F70 series Cases of 1,000 contain 4 packages of 250. Listings indicate length x o.d. in mm.

These Nessler tubes are ideal for color comparison and feature cap style stoppers that do not need to be removed to take readings. Shadowless bottom of each tube transmits undistorted light Standard Taper cap style stopper Replacement cap is 15182 (3058L93 & 3058L98) 3058K65 is…

Labcon's Overfit Caps create a liquid-tight seal on popular brands of glass and plastic culture tubes, including Labcon's SuperClear® round bottom culture tubes. Designed to easily recap blood drawing tubes, glass test tubes, and plastic culture tubes, Overfit Caps are ideal for…

These caps are ideal for resealing glass test tubes and glass culture tubes. Economical way to recap glass tubes, regardless of manufacturer. Caps can be written on with indelible ink for easy sample identification. Prevents spills and evaporation by employing a liquid tight seal.

Same as the 9210E23 series, but caps have Teflon ® overliner bonded to the rubber liner Listings indicate tube length x o.d. in mm

…use with evacuated blood collection tubes and glass and plastic test tubes. They protect from contamination and prevent evaporation. Closure will not crack or pop off. Seals inside test tube or over tube rim. The 12mm and 13mm closures seal over the rim of either 12mm or 13mm tubes, and when…

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

…with marking spot which also serves for orientation Caps are not included with tubes and must be purchased separately Packaged in styrofoam trays 9215D32 tube takes size 13-415 cap and is sold in cases containing 2 shelf packages of 500 tubes. 9215D54 and D76 tubes take size 15-415 cap…

Deep form, of black phenolic resin with cemented rubber liner. As supplied with 4893D11 series Flasks and 9210E23 series Test Tubes. Can be autoclaved for 20 minute periods at 121°C. Rubber liners have been found to be satisfactory for tissue culutre. Cap size shown is GPI thread finish.

With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

…samples. Caps fitted with O-rings for improved sealing MAS Probe and caps are 100% compatible for most solid state NMR spectrometers Thoroughly inspected before and after the precision machining process to ensure there are no material irregularities Spin testing is performed to only…

…in one container. They are also useful for other clinical and microbiological tests. Screw caps resist the effects of temperature and steam. These tubes have a white polypropylene GPI 38-400 threaded cap with a Polytetrafluorethylene (PTFE) liner. For replacement caps, see No. 1261-CO (1234B29).

…glass test tubes and plastic culture tubes. Flexible VACUCAP™ closures protect from aerosols of highly infectious microorganisms. They guard samples against cross-contamination and laboratory work areas against infection and spillage. Precision molded from low-density polyethylene, with a…

…etched with a unique serial number for ease of traceability and adsorbent identification. Stainless steel tubes may also be fitted with clips that accept adhesive labels for identification. Packed tubes are shipped with long-term brass storage caps and all tubes are thermally conditioned and tested…

…centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to accept snap cap 28150R-6 …

…complete with a Poly-Seal® polypropylene lined phenolic screw cap. TEST TUBE TONGS, Tongs are made of zinc coated steel, 6" overall length. Spring loaded jaw will hold a tube up to 1" in diameter. STOPCOCKS, STRIAGHT BORE, GLASS PLUGS, 1-ARM LARGER, Similar to CG-400, but with…

Manufactured from 5.1 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements, these test tubes are great for any lab. Each tube has a marking spot and reference mark for orientation during use and a threaded neck to accept screw cap, not included.

With the steady increase of SNR on modern NMR spectrometers, the trend of small volume testing fits in high-throughput NMR to save on solvent costs. Wilmad-LabGlass presents a 3mm OD Economy Sample Tube with the same outstanding quality and performance as our legendary 5mm line. The new 4"…

…tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall construction, short conical bottom tube with…

… 5mm O.D. tubes available in 7” or 8” lengths in quantities of 25 or 150 pieces Packaging allows for easy tube access and storage Attractively priced for a high-throughput laboratory environment Type 1, Class B Borosilicate glass construction with disposable caps Note:…

…Glass. Includes long skirted screw cap with nontoxic white rubber liner. Extra long working area yet short overall length for convenient handling. The short neck provides easy entry and removal of cover slips. Specifications: Borosilicate Glass Includes Black Phenolic S/Cap With White…

Heavy wall with lip for crown cap closure. Approximately 100mL capacity, 38mm O.D. x 17.8cm long.

…expectant tissue cultures with leighton culture tubes. Specifications: Borosilicate Glass White Marking Area Provided Included Long Skirted Screw Cap With Non-Toxic, White Rubber Liner Tube Size: 16x125mm Window Size: 11x37mm Cover-Slip Size: 9x222, 9x35 Screw Cap: 15-415

…simple reactions. With 10/10 or 14/10 outer joint externally threaded for making an O-RING-CAP-SEAL connection with mating inner joint. Stopcock on side arm is 1mm bore glass. Item supplied with holed cap, O-Ring and septa for sealing or syringe retrieval. For replacement caps (holed), see 9590-46,…

…Glass. Includes long skirted screw cap with nontoxic white rubber liner. Extra long working area yet short overall length for convenient handling. The short neck provides easy entry and removal of cover slips. Specifications: Material: Borosilicate Glass Includes Black Phenolic Cap w/…

Heavy wall with lip for crown cap closure. Used for polymerization and analysis of halogens by thermal decomposition in the presence of lime. O.D., all sizes, 25.4mm.

…or 07SI2020). Each Solid Sample Consumables Platform contains the following items: printer paper, membranes, precision tissue wipers, solid glass beads, 15mL conical tubes, 10-100µL pipette tips, 200-1000µL pipette tips, 12mm culture tubes, 12mm culture tube caps, sharpie marker.

Fits 13mm glass evacuated blood drawing tubes Fits most 12mm plastic test tubes Dual tabs for easy removal Polyethylene (PE)