Glass Stir

Compare Tool

Select up to 3 products

Glass Stir
1 - 32 of 205
Sort
View
Show
  • KIMAX Brand Glass Stirring Rods

    Kimble

    With both ends rounded Designed from Federal Specification NNN-R-560, Type 1 Length x diameter in mm are shown in listings

  • Stirring Shaft, Glass, Polished, 10mm

    Ace Glass

    Polished glass stirring shafts, 10mm OD. Recommended for use with only our 8050,8066,13443 and 13445 bearings. Join 8083,8085,8086,8087,8096 blades to button type shafts. Join 8088, 8089, 8090 & 8091 agitators to bead type shafts. Plain shafts will accept 8094 & 8095 agitators secured with a…

  • Polished Glass Stirrer Shafts

    Wilmad LabGlass

    Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

  • Glass Stirring Rod

    United Scientific Supplies

    Soft Glass Stirring Rod, both ends round.

  • Borosilicate Glass Stir Rods

    GSC International, Inc.

    Borosilicate Glass with Fire Polished Ends

  • Stirring Shaft, Glass, 19mm, Polished

    Ace Glass

    Polished glass stirring shafts, 19mm OD. Available in solid and hollow styles and in various lengths. Join 8085 blades to button type shafts, Join 8091,8092,8093 and 8100 agitators to either knob or drilled style shafts. Join all shafts to stirrer motor using 8124 series chucks. Recommended for use…

  • Stirring Shaft, 10mm, Precision Ground Glass

    Ace Glass

    Precision ground glass stirring shafts, 10mm OD, paddled, button type and bead type. Button type shafts accept 8083, 8085, 8086, 8087 & 8096 stir blades. Beaded shafts accept 8088, 8089, 8090 & 8091 agitators. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 & 8055. Use…

  • Stirring Shaft, Glass, 10mm, Precision Ground

    Ace Glass

    Precision ground glass stirring shaft, 10mm OD, attached vanes. Vanes will fit through a 45/50 joint and are contoured for use with our 9448 and 9456 series Mini-Lab flasks. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 and 8055. Compatible with our 8050 mechanical…

  • Stirring Shaft, Glass, 19mm, Precision Ground

    Ace Glass

    Precision ground glass stirring shafts, 19mm OD, hollow. Button type shafts accept 8085 blades and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor using 8124 series chucks.

  • Stirring Shaft, Glass, 19mm, Precision Ground

    Ace Glass

    Precision ground glass stirring shafts, 19mm OD, hollow, heavy duty. Knob type shafts accept 8091,8092,8093,8100 agitators and can be used in all 19mm ID Trubore 8059, 8060, 8061 and 8065 bearings. Compatible with our 8050 mechanical seal and 13445 PTFE Debris-free bearings. Join to stirrer motor…

  • Stirring Shaft, Glass, Crescent type, 10mm

    Ace Glass

    Precision ground glass stirring shafts,10mm OD, crescent type. Useful for stirring viscous materials at low rpm. Available for round bottom flasks of 1, 3 and 5 liters. Code -19, 3 liter size will fit a 2 liter flask, but closely. Flask opening must be 29/42 or larger. Use with Trubore bearings…

  • Stirring Shaft, Hollow Glass, 5mm, Precision Ground

    Ace Glass

    Precision ground, hollow, 5mm glass stirring shaft. Button type shaft accepts 9542 blades and can be used in matching 9524 and 9527 bearings. Holes are provided in the side of the shaft for material introduction and at the bottom for emission into the flask contents. Join to stirrer motor using 8124…

  • Stirring Shaft & Agitator, Glass or PTFE,5mm, Precision

    Ace Glass

    Stirring shaft agitator combination available in either a solid, precision ground glass shaft or all PTFE knob type shaft with a PTFE snap-fit agitator designed to fit through 14/20 and 18/11 joints. Designed for use with our 5mm ID 9524 or 9527 bearings and flasks of 50ml and smaller.

  • Stirring Shaft, PTFE Coated Glass, 10mm

    Ace Glass

    Precision ground glass stirring shafts, 10mm OD, button type, PTFE coating permits higher stirring speeds with Trubore bearings. If used unlubricated, 500 rpm max with water-cooled 8040 bearing. Compatible with 8036, 8038, 8039, 8043, 8047, 8051, 8055 and 13443 bearings. Button type shafts accept…

  • Stirring Shaft, Glass, 5&6mm, Polished & Precision Ground

    Ace Glass

    Button type, solid glass stirring shafts, 5 & 6mm OD. Precision ground shafts, codes -04 & -06, should be used in matching glass Trubore 9524 and 9527 bearings. Polished shaft, code -40, should be used only in our 8066-120, 6mm PTFE inner bearing. All accept our 9542 blades. Join to stirrer motor…

  • Flexible Stirring Shaft, Isolate the Stir Motor

    Ace Glass

    …9.5mm (3/8in) shafts. Reactor end consists of a detachable, hand-held or clamped handpiece with a 1/4in collet and 8mm pin adapter for use with our 8124 family of stirring shaft chucks. Order separately chucks 8124-07 (6mm shaft), 8124-10 (10mm), 8124-15 (19mm). 14000rpm, 24in-lbs torque maximums.

  • Magnetic Stir Bar Retriever

    Corning

    The Corning stir bar retriever contains a strong magnet to remove a stir bar from all glass and plastic containers used in the laboratory. The container must be taken off the magnetic stirrer before using the retriever as the high-powered magnet in the stirrer cancels out the one in the retriever.…

  • Magnetic Stir Bar

    Kimble

    PTFE-covered round magnetic stirring bar. This stirrer bar permits stirring in closed containers without contamination. Supplied in glass vial with polyethylene stopper. Approx. Overall Width (mm) : 4 Approx. Overall Length (mm) : 12 Bars per Vial : 2

  • Collar, Stir Shaft

    Ace Glass

    Designed to be used with 8068, 8070, 8071, 8074 or 8078 stirring shafts. Handy for positioning shaft in bearing, and preventing shaft from dropping into flask. Supplied with PTFE gasket to prevent scratching top of bearing and acts as dust cover. Available in either Glass-filled PTFE or 316…

  • Stir Shaft, Retreat Agitator, PTFE

    Ace Glass

    PTFE covered stainless steel shaft with a solid PTFE retreat curve agitator. Featuring a retreat angle of 30 degrees and, for a better grip by the stir motor chuck,50mm of exposed stainless.

  • Stir Shaft, 4 Blade Propeller, PTFE

    Ace Glass

    PTFE covered stainless steel shaft with solid PTFE, 4 blade screw propeller. Blades are pitched 45 degrees. For a better grip by the stir motor chuck, 50mm of stainless is left exposed.

  • Stir Rod Dairyware Acidity Test 10ml

    Kimble

  • Borosilicate Glass Rods

    Friedrich & Dimmock

    Popular sizes in convenient packages Lengths are approximately 4', in packs of 10 lbs. Assortment pack contains each size glass rod, in the following quantities.

  • PYREX Glass Rods

    Corning

    In lengths of 4 feet, with square cut ends.

  • Offset Stir Motor & Gearbox, Standard and Hazard Duty

    Ace Glass

    Offset gearbox and motors complete with right angle drive unit for pilot plant systems. Motors with right-angle drive save headspace and work well where height is restricted. Available for standard or hazardous duty applications. Available in either 1/4hp or 1/2hp with a digital 115/230v 50/60Hz…

  • Stirring Shaft Coupling

    Ace Glass

    Stir shaft couplings for connecting glass or metal stir shafts to the adjustable chuck on an overhead stir motor. Compression connection is secured to various OD shafts via an Allen screw coupling. The Codes -22 and -24 are complete pass-thru assemblies that enable height adjustment on stir shafts…

  • Stirring Shaft, Unground, 9mm

    Ace Glass

    Unground, 9mm OD stirring shaft design for use with our 9528 vacuum and debris free stirrer assembly. 380mm straight section, 416mm overall length. Use our 9530-08 blade.

  • Stirring Shaft, Unground, 9mm

    Ace Glass

    Unground, 9mm OD shaft for use in liquid seal bearings and our debris free 8098 and 8099 stirrer assemblies. Code -25 is a button type shaft which accepts our 8083, 8084, 8085 and 8086 blades. Shaft length accomodates flasks from 500ml to 5000ml.

  • Digital Stirring Hot Plates

    Torrey Pines Scientific

    …screen simultaneously displays all parameters. Unit can be set at specific temperature, heating rate, stirring speed, time and even turns off heater and stirrer at the end of a cycle. Stir up to four liters of aqueous solutions from 100 to 1500 rpm. The stirrer is accurate to 10 rpm and maintains…

  • Paddle, Stirring Nylon Rigid

    Dynalon

    Product Dimensions (l x w x h) : 40x4.5x1.25in Scraping paddles, firm blade. Nylon ® paddle scraper with plastic handle that will not scratch glass.

  • Paddle, Stirring Nylon Soft

    Dynalon

    Product Dimensions (l x w x h) : 40x4.5x1.25in Scraping paddles, soft blade. Nylon ® paddle scraper with plastic handle that will not scratch glass.

  • PYREX® Spinbar® Magnetic Stirring Bars

    Bel-Art Products

    …Spinbar® glass encapsulated Alnico magnet stirring bars are useful for high temperature applications up to 274°C (525°F). Completely smooth surface offers "zero absorption"; easy to clean Meets US Pharmacopoeia specifications for Type I Borosilicate glass

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.