Glass Rod Stirrer

Ideal use for pestle glass and stirrer rods. Used with homogenizer drive. Size: 10mm

Ideal use for pestle glass and stirrer rods. Used with homogenizer drive. Size: 6mm

Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

…7.5 in work surface, all three models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. The hot plate stirrer/magnetic stirrer model (H4000-HS) comes complete with a support rod for mounting thermometers and temperature probes.

…Support rod is made of stainless steel. Height is 29”; available in two models. Jacob's Chuck, Adjustable Fits 3/8 ” (10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied Fits 3/8” (10 mm) diameter motor shafts Adjusts to accept stirrers…

With both ends rounded Designed from Federal Specification NNN-R-560, Type 1 Length x diameter in mm are shown in listings

Popular sizes in convenient packages Lengths are approximately 4', in packs of 10 lbs. Assortment pack contains each size glass rod, in the following quantities.

…not recommended for use with this bearing. Complete 10mm diameter assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring (LG-9470-300), threaded heavy wall borosilicate glass adapter, and top cap (LG-10818-114). See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.

…Polished Glass Solid Stirring Rods are constructed from smooth, low-expansion, low-extractable borosilicate glass. Their mechanical strength, excellent heat resistance, and outstanding chemical compatibility make them the perfect general use stirrer. Borosil® Glass Stirrers are avaialble…

…homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a rubber stopper is inserted in the top of the pestle. A short steel rod (sold…

Replacement components for CLS-1414 and CLS-1415 Spinner Flasks.The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.

…homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a rubber stopper is inserted in the top of the pestle. A short steel rod (sold…

…homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a rubber stopper is inserted in the top of the pestle. A short steel rod (sold…

…homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a rubber stopper is inserted in the top of the pestle. A short steel rod (sold…

…With a square 7in. work surface, all models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles, and other vessels. An optional support rod (H3770-ROD) is available for mounting thermometer, temperature proves, etc. Improved Features: …

…Material: cast aluminium Thomas No. 1227W25 For fastening ETS-D5 or ETS-D6 to the support rod H 16 V. Thomas No. 8613Q23 Stainless steel support rod for all magnetic stirrers with M 10 threaded bushing. Thomas No. 1203D35 For work with bath attachment over 180 mm Ø.…

…the glass is chemically toughened for extra resilience. All units feature an integral fixing point for a retort rod and are BioCote™ antimicrobial protected. Designed to seamlessly blend scientific precision with contemporary styling, each stirrer is custom designed. Choose between a glass…

…Material: cast aluminium Thomas No. 1227W25 For fastening ETS-D5 or ETS-D6 to the support rod H 16 V. Thomas No. 8613Q23 Stainless steel support rod for all magnetic stirrers with M 10 threaded bushing. Thomas No. 1203D35 For work with bath attachment over 180 mm Ø.…

Digital temperature and speed displays External temperature control Closed-loop control Hot plate stirrers use microprocessor-controlled feedback technology to maintain consistent stir speed and temperature. Digital temperature display is adjustable in 5°C increments and indicates…

…and operation. All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant. Adjustable stirring rate provides great torque or high speed. Patented PTFE stirring rod bearing for reliable and quiet operation. Optional multi-layer stirring blades…

The award-winning KMO 3 basic is a small but powerful magnetic stirrer without heating function. It provides: Unique design with glass surface Brilliant, clear white display Illuminated, flat stirring plate Key-lock button Reverse rotation Integrated USB interface (control…

…times and costs “Spill Trough” design channels spills away from electronics and controls. Support rod mount included for attachment of a standard retort rod for thermometer, buret, etc. LED lights for Power, Heat and Stir. Hot Top Indicator light warns when top is too hot to…

Pass-thru rod for use with Caframo 13565 & 13566 stir motors attached to our 8081 flexible stirring shaft.

Unground, 9mm OD stirring shaft design for use with our 9528 vacuum and debris free stirrer assembly. 380mm straight section, 416mm overall length. Use our 9530-08 blade.

…stirrer is produced that will hold to within 1mm of vacuum and withstand pressures in the flask up to 300mm. The 9532 Agitator, used with this bearing actually develops a negative pressure of 230mm water at operation speeds. The side opening on the bearing is used to add gases through the hollow rod…

…components, improves performance, and prolongs product life Two piece casting design deflects spills away from electronics, includes a built in mount for an optional support rod (No. 400084) 1 x 3/8 inch stir bar (No. 401435) included with each stirrer Two-year manufacturer’s warranty

…design protects components, improves performance, and prolongs product life. -Two piece casting design deflects spills away from electronics and includes a built in mount for an optional support rod (No. 400084). -1 x 3/8 inch stir bar (No. 401435) included with each stirrer. -Two-year warranty.

…design protects components, improves performance, and prolongs product life. -Two piece casting design deflects spills away from electronics and includes a built in mount for an optional support rod (No. 400084). -1 x 3/8 inch stir bar (No. 401435) included with each stirrer. -Two-year warranty.

…diameter. Available with either 28" or 36" high 5/8" diameter support rods fastened to the base with lock nuts. Two additional threaded holes in the base will accept extra support rods. For additional support rods, order 13586-15 (60"), 13586-25 (28") or 13586-27 (36").

Right-angle, side drive gear box. 9-in long aluminum support rod for attaching to a clamp holder or flex-frame. Polished aluminum case. 10mm stainless connecting rods on in/out drive. Can easily be used with ACE 8081 Flex-Shaft and either 8126-10 or 8124 chucks. Using a Flex shaft allows for use…

Not autoclavable. 2 per pack. Use with 10mm stirring rods. Replacement bearings for use with Safe-Lab® Joint Stirrer Bearing

The Flex-Coupling permits the use of the glass-stirring rod with a motor drive. The 3" epoxy-coated spring compensates for misalignment, reduces the chance for breakage, and eliminates the need for special adapters. Fits 5/16” motor shaft