Glass Pressure Reaction Vessel

…pressurization or contents release, allowing many test parameters Reaction vessels are available in three standard capacities: 3 oz., 6 oz. and 12 oz. CAUTION: safety precautions should be used with glass under pressure. Maximum safe pressure depends on service conditions. Pressure…

…wall pressure vessels have an internal thread for use with PTFE bushings as pressure seals. The unique design allows hand tightening and loosing for easy access into the vessel. O-ring is positioned on the bushing above the thread for improved sealing. Vessels are useful for pressure reactions and…

…6384, 6386, 6388, 6423, 6425, 6427, or 6429 reaction flasks. Duran flange supplied with a shallow O-Ring groove for use with mating grooved flask. #15 Ace-Thred center and various #15 and #7 side necks available allow connections under pressure conditions without danger of blowout. For connectors,…

…pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and has a higher allowable pressure…

…pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and has a higher allowable pressure…

Complete, two-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and head) design allows the…

…featuring a one-piece, unjacketed, pressure vessel with a combination Ace-thred valve and 28/15 o-ring ball joint bottom outlet. Vessel top has a 25mm Ace-thred center neck and various multi-neck configurations. System is designed to perform positive pressure reactions at up to 45 psi at 100 degrees…

…pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and has a higher allowable pressure…

Complete, two-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and…

Used to connect two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of…

…Clamping which is positive and quick-acting; easier to apply and remove than two-piece clamps Spring-action lugs which cannot crack flange Fiber knobs which are heat-resistant Ribbed Teflon gaskets, which reduce clamp pressure required for complete seal Maximum temperature 200°C

…glass reactor system with 400mm flange. 100L glass reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Squatty Reactor System Features: More Clearance: 100L Squatty Glass Reactor…

50L Squatty, Low Profile, glass reactor system with 400mm flange, on our innovative Kwik Mount support frame.  Complete 50L Squatty Reactor System Features:  More Clearance: 50L Squatty Glass Reactor System with 400mm Flange Maximizes Clearance Under The…

…Reactor Securely and Allows Easy Installation/Removal  Lexan Safety Shield On All Four Sides  Pressure Relief Manifold System: Supplied with CG-1969-M High Flow Pressure Relief Manifold System With Insulated Hoses and Bulkhead Fittings Mobile: Large Swivel Casters with…

…jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform…

…(whole support and glass vessel shipped pre-assembled) One year warranty and lifetime US-based parts, service, and support. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled…

…R-series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform…

Cylindrical shaped tube, similar to AF-0537 but with an standard taper inner joint, useful for simple reactions. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.

Cylindrical shaped tube useful for storage or simple reactions. Tube has a standard taper outer joint. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.

…and Spray Ball. Pressure and Flow Information: CG-1989-X-22: 22mm Spray Ball -max tank diameter: 2.5ft,  @ 15 PSI (min pressure to spin): 7.23 L/min.;  @ 50 PSI: 14.29 L/min. CG-1989-X-35: 35mm sPRAYbALL -MAX TANK DIAMETER: 4.0FT,; @ 20 PSI (min pressure to spin): 10.45…

…series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform…

…ChemglassRxnHub™ frame system allows for easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical forces placed on the glass vessel inlet/outlet. System is supplied complete as illustrated with Triple Insulated Flexible Hose.…

Large scale sublimation apparatus constructed of heavy wall glass. Will sublime 100gms of solid sample. Cold finger tube positions in center neck and is held by a plastic bushing to a threaded condenser flask. All joints are PTFE-Clad to eliminate the use of grease and still avoid freezing. Kettle…

…Chemglass high flow manifold system allows for easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical forces placed on the glass vessel inlet/outlet. System is supplied complete as illustrated with Triple Insulated Flexible Hose.…

Adapter with #15Ace-Thred top and 14mm OD offset bottom tube with O-Ring grove. Used on small pressure reaction vessels and heads to allow for more space for columns, condensers and addition funnels.

Used with Pressure Reactors, listed in Reaction Section. Heavy wall condenser has a #15 Ace-Thred at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thred on 6433 Reactor Head, One-Piece Pressure Reactor or any vessel with a #15…

Jacketed filter reactor systems with all you need to perform single or multi-step reactions and filtrations in the same vessel. Systems with Ace-Thred heads are pressure rated to 35 psi at 100 degrees C. System sizes vary from 150ml to 6000ml with 60mm

…jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform…

…pressure/suction pump with an infinitely controlled rotational speed ensures optimal circulation. The maximum pressure can also be regulated by an optional pressure sensor, meaning that sensitive glass reactors and apparatus can reliably be protected from breakage. Additionally, Ministats offer the…

…Rotates with the Shaft providing for a Vacuum and Pressure Tight Seal Maximum Vacuum Rating is 5 Torr, Maximum Pressure is 2-3 PSI. Unlike Conventional PTFE Bearings, Bearing will Not “Flake” Contaminating Your Reaction. All Seals are Made Using Perfluorinated O-Rings…

…Rotates with the Shaft providing for a Vacuum and Pressure Tight Seal Maximum Vacuum Rating is 5 Torr, Maximum Pressure is 2-3 PSI. Unlike Conventional PTFE Bearings, Bearing will Not “Flake” Contaminating Your Reaction. All Seals are made using Perfluorinated O-Rings…