Glass Plates Electrophoresis

Compare Tool

Select up to 3 products

Glass Plates Electrophoresis
1 - 25 of 25
Related Categories: V16 | Apogee | Well Comb | Power Supply For Gel | V15.17
Sort
View
Show
  • …(W × H), which increases the separation length by more than 30% over conventional 10 × 8 cm gels. In addition, miniVE is compatible with the glass plates, combs, and spacers of SE 260 Mini-Vertical units. For gradient gels, mini-Vertical Gel Casters can produce up to four identical gels at one time…

  • …included: A neoprene gasket provides leak-free sealing of the glass plate assembly (2 for the V16-2) Fits gels of different thicknesses with straight or notched glass plates but includes one pair of glass plates: Long – 19.7 cm wide x 19.1 cm long Short – 19.7 cm wide x 16.0…

  • Glass plate sandwiches seal leak free without the use of messy grease or tape Once cast, gels can be wrapped in plastic and refrigerated for several weeks Includes: Caster Body with Gasket Face Plate with Inlet Port Rectangular Glass Plates Notched Alumina Plates

  • …transfer of glass plates between separate casting and gel running components Glass plates with bonded spacers assure clean well formation, correct alignment for leak-free casting and eliminates manually aligning spacers Casting stand design ensures leak-free casting even if glass plates are…

  • Full-View Test Tube Supports

    Bel-Art - SP Scienceware

    …tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying and storing glass plates used with vertical electrophoresis apparatus Steam autoclavable at 121°C (250°F)

  • …with internal cooling core, lower buffer chamber, SuperSafe™ lid with attached power supply leads, four blank glass plates, two notched glass plates, two notched alumina plates, combs (P8DS and P8D9 have two combs: 10 well, 0.8 mm thick; P10DS have four combs: two 1-well and two 20-well, 1.5…

  • …the SE400 Series at one time under identical conditions. How it works: Insert a divider plate between the glass plates that make up a single gel sandwich. Place spacers on each side of the divider plate to form two gel cavities for pouring gels.This two gel “club sandwich” fits into the same…

  • Glass and Alumina Plates for use with miniVE™, SE260, and SE250. NOTE: Alumina Plates are not recommended for use with miniVE.

  • …or phosphorescence from a 6-, 12-,24-, 48-, or 96-well plate in either the X or Y direction or for luminescence micro densitometry of TLC plates and electrophoresis gels. Controlled by the computer. Silica excitation fiber, glass emission fiber. May require LS-50B Upgrade Kit (P/N L2108529).…

  • Surfaces like paper, leather, electrophoresis gels and agar plates may be difficult to measure with traditional pH glass bulbs due to concerns about breakage. A flat electrode like our pH2100, is ideally suited for these types of pH measurements as well as measurements of suspended sludges and…

  • …side-by-side, allowing eight second-dimension separations at once Cast and run wide mini gels using 8 cm glass plates and clamps Run denaturing and native polyacrylamide, 2-D, electrophoresis, agarose, and nucleic acid gel electrophoresisMaintain temperature between 1 and 45°C with built-in heat…

  • Azure Aqua

    Azure Biosystems

    Azure Aqua Quad Mini-Cell with 1mm Gel Plate Set The 4-gel cell includes 5 1mm gel combs (10 and 15 well), 5 spacer plates, 10 short glass plates, 4 casting stands, 4 casting frames, 5 gel shovels, electrode assembly, tank, lid with power cables, and mini cell buffer dam – compatible with…

  • STS-45i Sequencer

    IBI Scientific

    …are designed for ease of use, and create perfect pressure to prevent leaking of over-tightening. It’s patented slant back design ensures the glass plates remain in place during assembly. The removable lower buffer tank allows the user to dispose of buffer without moving the unit. The STS-45i also…

  • …circulator. The alumina back plate of each gel sandwich is in contact with buffer in one of the two buffer chambers, which act as heat sinks. The alumina plate conducts heat away from the gel sandwich into the upper buffer at a rate 40-times faster than glass of comparable thickness. In addition,…

  • …(W × H), which increases the separation length by more than 30% over conventional 10 × 8 cm gels. In addition, miniVE is compatible with the glass plates, combs, and spacers of SE 260 Mini-Vertical units. For gradient gels, mini-Vertical Gel Casters can produce up to four identical gels at one time…

  • Joey™ Protein Gel Caster

    Owl Separation Systems

    …. Spacer plate provides even pressure across gel. Adjustable thumb screw clamping system makes casting gels extremely easy. Three-point leveling system ensures uniform gel casting and two rear stabilizing screws prevent stand from rocking. There are no air spaces between glass plates and the bottom…

  • …The unit can run 12 tube gels with two tube gel adapter kits. Available slab casters include 2, 4 and 10-place models. Includes: Basic unit, 10 glass plates, two alumina notched plates, well-locating decal, SE245 Dual Gel Caster, two each 0.75-mm thick 10-well combs and 0.75-mm thick spacer set

  • Coomassie® Brilliant Blue R-250 is a fast acting, sensitive dye. Brilliant Blue R can be used for staining proteins on polyacrylamide electrophoresis gels. Improvement of sensitivity and background have been accomplished using Brilliant Blue dyes in a colloidal form. Other applications for…

  • S2 Sequencer

    Apogee

    …need to move the apparatus for buffer disposal Built-in twist and hold clamps secure glass gel assembly in place A molded silicone gasket ensures leak-free operation without grease or notched plates Both lids safely prevent buffer chamber access when power cords are in place Many…

  • …chamber with safety interlocking lid and attached power supply lead; anodized aluminum heat sink; one pair built-in side clamps; two blank glass plates; two notched glass plates; two sharktooth combs; one well comb, 0.4 mm thick; spacer set (0.4 mm thick); and one adhesive temperature indicator.

  • … Precast 12.5% polyacrylamide buffer for second-dimension 2-D electrophoresis. Ready-to-use products with a long shelf-life that saves you time by eliminating the need to make buffers, cast gels, and wash glass plates, leaving more time for more important work. DIGE gels run with DIGE…

  • DIGE Gel

    Cytiva

    …polyacrylamide gel in a low fluorescent glass cassette. Precast 12.5% polyacrylamide gel and buffer for 2-D DIGE. Ready-to-use products with a long shelf-life that saves you time by eliminating the need to make buffers, cast gels, and wash glass plates, leaving time for more important work. …

  • …extensively in SDS-PAGE for the analysis of proteins. Brilliant Blue R has been used for many years for staining proteins on polyacrylamide electrophoresis gels. Improvement of sensitivity and background have been accomplished using Brilliant Blue dyes in a colloidal form. The Brilliant Blue…

  • …excision. For documentation, the filter cover is easily removed completely. UI technology, bright and clear images:  The bright LED light plates and filter layer provides an extremely evenly lit viewing surface. Even in ambient light, bands of DNA can clearly be seen in stained gels. Images…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.