Glass Insert

Compare Tool

Select up to 3 products

Glass Insert
1 - 32 of 379
Sort
View
Show
  • Limited Volume Inserts

    labForce (a Thomas Scientific Brand)

    labForce Brand Limited Volume Inserts are ideal for sampling small volumes using a labForce 12x32mm vial for support. Inserts are pre-assembled with a polyethylene spring which aids in alignment. Manufactured from Type I borosilicate glass Conical design permits complete sample removal …

  • 9mm Vial with Fused Insert

    labForce (a Thomas Scientific Brand)

    …9mm glass vial with a clear glass insert fused together eliminates movement of the insert. The fused insert also eliminates concerns about contaminants around the fused seam/space between the neck of the vial and the insert. Capacity - 300uL Manufactured from Type I borosilicate glass

  • Whatman Autovial Syringeless Filters

    GE Healthcare

    …sterile or nonsterile membrane media available Built-in air purge maximizes sample recovery Glass fiber or polypropylene prefilter in selected 12 mL models – for difficult-to-filter samples Choice of glass fiber or polypropylene prefilters. Available in 5 or 12 mL capacitySingle unit convenience…

  • Inserts for StepVial II Screw Thread Vials

    Thermo Scientific Sun SRi

    Inserts are compatible with StepVial II screw thread vials Made from clear glass or untinted plastic Flanged insert designed to be suspended from the rim of StepVial II Bottom spring inserts provide cushioning against needle contact to reduce bending Usable and residual volumes are valid for…

  • Limited Volume Inserts with & without Bottom Springs

    J.G. Finneran

    inserts are manufactured from Type I borosilicate glass and are available in 200µL and 250µL sample volumes. Limited volume inserts fit in 12x32mm vials with Snap Seal, Snap Ring, Crimp Top, and Big Mouth finishes, as well as standard and screw thread openings. The pulled point inserts

  • 96-Well Polypropylene Plates and Glass Inserts

    J.G. Finneran

    Glass Inserts Designed for High Throughput Chromatography Glass Inserts loaded in the 96-well plate performs similar to standard 12x32mm vials for Chromatography testing. 96-well pierceable Cap Mat is lined with the sample PTFE/Silicone septa used in closures for Chromatography. Glass Inserts

  • 250uL Glass R.A.M.™ Vial Assembled with Step Insert

    J.G. Finneran

  • 12 x 32 mm Screw Top vials, limited volume step vial, size 250 µL, clear glass,…

    MilliporeSigma

    General description Vial incorporates the unique StepVial design that precisely centers a limited volume insert in the vial neck. The interior finish of the top of the vial is recessed to allow the top of the insert to rest correctly in the vial.

  • Interlocked™ Limited Volume Standard Opening Vial

    J.G. Finneran

    Interlocked tm Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.

  • 250 L Polyspring Insert

    National Scientific

    Pulled point interior Conical glass The 250 µL Polyspring insert features a conical shape and a pulled point interior. As with all Polyspring inserts, it features a polyethylene spring that serves to center the bottom of the insert and to provide a cushion against needle contact.…

  • 96-Well Polypropylene Plate and Glass Inserts

    J.G. Finneran

    … 700µL inserts assembled in the square well plate can be sealed with a Molded 96-Square Well Mat 1.0mL and 1.2mL inserts assembled in the square well plate can be sealed with a Molded 96-Round Well Mat Compatible with autosamplers and robotic systems All Glass Inserts are available…

  • Molded Mats for 1.0mL Inserts Assembled in 96-Square Deep Well Plate

    J.G. Finneran

    Round liner plug locks into 8mm glass inserts assembled in the 96-Square Well Deep Plate Manufactured from medical grade silicone Autoclavable and excellent chemical compatibility

  • Glass Deep Well Plates

    Hirschmann

    …screening applications Chemically inert Solvent resistant Highly pure Individual and fixed cavities Lightweight Glass plates meet requirements for use in combinational chemistry and high speed chromatography without the problems that sometimes arise from the use…

  • Interlocked™ Vial with Insert

    J.G. Finneran

    Interlocked tm Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.

  • Glass Plates for SE660, SE600X Chroma, SE600, SE640, SE410, and SE400

    GE Healthcare

    …1.5 mm thick gels on SE600 Series units and two gels on the SE400 Series at one time under identical conditions. How it works: Insert a divider plate between the glass plates that make up a single gel sandwich. Place spacers on each side of the divider plate to form two gel cavities for pouring…

  • Microvolume Inserts For Wide Opening Vials

    Agilent Technologies

    …these inserts have practically no dead volume. The syringe needle can strike the bottom of the insert without being damaged. The polymer feet act as a shock absorber. This allows all of the sample to be withdrawn. These inserts are self-aligning and stand straight. Conical Glass Inserts (2714S15)…

  • Coaxial Inserts

    Wilmad LabGlass

    …experiments Ideal for variable temperature experiments as materials is the same between the tubes and spacer In the complete set the insert and outer tube are fused together at the bottom. It is recommended for high field experiments under 600 MHz For ultra high field experiments…

  • Target Crimp Top Vial System, Glastic Vials

    National Scientific

    …formation improves seal. I-D vials with write-on patches have graduations at 0.5, 1.0 and 1.5 mL . Glastic vials (2702C58) are effective and economic alternatives for vial and insert combinations. They consist of a polypropylene outer vial with a borosilicate glass insert molded to the inside.

  • WebSeal 96 Well Glass Insert Wellplate Kits

    Thermo Scientific Sun SRi

    Convenient wellplate kits with pre-inserted glass or PTFE vials Replacement vials for kits available separately Unique cutting tool allows removal of individual samples with the seal in place, eliminating cross contamination Kits are packaged with vials pre-assembled along with a pack of 5…

  • µLplate® Glass Inserts

    MicroLiter

    Conical Glass, Pulled Point, Narrow Opening Microliter has a Full Line of LC and GC Chromatography Consumables and Can Help You Determine the Best Products for your Application.

  • µLplates® with Glass Inserts Installed

    MicroLiter

    These products are sold as one microplate with 96 inserts installed.

  • DI Glass Inserts for Agilent 5890 Packed Column GC

    Restek

    Tolerances closely controlled Can be removed from the septum nut weldment

  • Joint Inserts, PTFE, Fits 6472 Flat Glass Heads

    Ace Glass

    …PTFE, standard taper joint inserts for 6472 series flat glass heads. This low profile insert allows for increased working space above the head. The insert is secured to the head with a reverse threaded locking nut and sealed using a FETFE O-Ring. The top of the insert is formed to allow the use of…

  • Limited Volume Vial, Glass/Plastic

    J.G. Finneran

    100uL Limited Volume Large Opening R.A.M. Vial. Glass insert with clear plastic vial 100uL Limited Volume Large Opening R.A.M. Vial. Glass insert with amber plastic vial

  • 20 Microliter Insert for Chromtography Vial

    Qorpak

    20 microliter insert for Chromtograph Vial Glass Flat Bottom Inser FOB Vineland, NJ

  • Interlocked™ Big Mouth Screw Thread Vial

    J.G. Finneran

    Interlocked tm Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.

  • Interlocked™ R.A.M.™ Large Opening Vials

    J.G. Finneran

    Interlocked™ Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.

  • Insert PP 0.3ml Man Pt 5.6mm

    Thermo Scientific Sun SRi

    Inserts are made from clear glass or untinted plastic; use with amber vials for light sensitive samples. Flanged inserts are designed to be suspended from the rim of StepVials Bottom spring inserts provide a cushion against needle contact to reduce bending Usable and residual volumes are valid…

  • Limited Volume Snap Ring™ Crimp Top 12 x 32 Vials

    J.G. Finneran

    Glass Insert/Plastic Outside Vials are a combination of Type I low extractable borosilicate glass inserts and clear or amber thermoplastic polymer outer vial shells. Only the glass contacts the sample and the seal.

  • Vials Scrw Top Fixed Insert Clear

    Agilent Technologies

    Clear, screw top vial with fixed insert. 300 µL insert volume 100/pk

  • Vials Scrw Top Fixed Insert Amber

    Agilent Technologies

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.