Glass Frit Filters

…use in fabrication of special glass apparatus. Available in F, M, C and XC porosities. Pressure Limits: Fritted glassware is designed for low pressure vacuum filtration or gas flow. The MAX differential pressure should not exceed 15 PSI. Thermal Limits: Fritted glassware should not be exposed…

…filter paper Offered in nine sizes and three porosities Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material being filtered. The…

Filter discs, available in glass fiber or granular type. Glass fiber filter discs last longer, are more abrasion resistant, and are superior in performance than granular type discs. Granular discs for analytical and general bacteria filtration are avai

Kimble 28400 With fused-in fritted discs Designed from Federal Specification DD-F-776 Dimensions are identical with corresponding sizes of 5220F28 series. Type designates capacity (in mL) and porosity.

…with fritted glass support is designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter.  This unit is also recommended for filtering large volumes of HPLC solvents. The ground glass connection…

Filter Tube, Fritted Disc, Inner Joints, Synthware, Joints: 14/20 and 24/40 available, Frit OD: Available in sizes ranging from 20-36mm, Frit Porosity: Coarse or Medium available.

WUsed in applications where filter paper would be attacked by the material being filtered, these borosilicate glass Buchner filter funnels with sealed-in fritted glass discs are available in Coarse(C), Medium(M), or Fine(F) porosities.

This unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The…

Filter discs available in plate glass, polyethylene (100 micron) and fritted glass porosities A (145-174 microns), B (70-100 microns), C (25-50 microns), and D (10-20 microns).

…a vacuum filter. Includes a fritted glass filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters…

Filter Tube, Fritted, Glass Stopcocks, Synthware, Inner Joints: 14/20 or 24/40, Frit OD: Sizes available ranging from 30-36mm, Frit Porosity: Coarse or Medium, Stopcock Bore: 2mm, Stopcocks have constant pressure retention device

Fritted filter disks for Ace Membrane Filtration Apparatus. Special tight outside diameter and tolerance to fit 3702-10 and 3700-10 filter adapters.

Cylindrical, heavy-wall reaction flask with an integral fritted disc. Flask has flat flange top with an o-ring groove. For heads see 6528, 6529 and 6530 series. Can be used with 6517 quick clamp or two piece clamp. Bottom outlet tube.

Filter System, Fritted Glass, 300mL Filter System, Stainless Steel Screen, 300mL Filter System, Fritted Glass, 100mL

Fused, fritted glass disc Polished ends Pore size: coarse, 40-60 µm, medium, 10-15 µm, fine 4-5.5 µm 30 mL disc diameter: 30 mm; fits tube i.d. 36 mm, 50 mL disc diameter: 40 mm; fits tube i.d. 42 mm.

…sterilized in dry heat to 180°C.Can be used up to 200°C.GV 050 Series GV 050/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, silicone cap and supplied with air inlet, membrane filter accessories Cytiva offers a choice of Whatman holders for use with membrane filters.

Porous fritted glass filter stick used to fabricate gas dispersion tubes. Measures 10mm O.D. x 20mm long, hollow at one end. Packed 6 per package. Minimum order, one package.

With porous fritted glass tip. Available in 150mm and 300mm lengths. O.D. of both lengths, 10mm. Fits through #11 Ace-Thred.

…sterile membrane filters. Also applicable for analysis of suspended solids in water using 47mm depth filters. Complete set includes a borosilicate glass funnel and base., anodized aluminum spring clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm,…

…sets consist of seven cones designed to fit the Buchner and fritted glass funnels, porcelain filters without headpieces, and for reverse flow cleaning of filter crucibles. Especially useful for supporting funnels, Gooch crucibles, filter tubes, etc. in filtration assemblies. The adapter does not…

…and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 100 Series GV 100/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories Cytiva offers a choice of Whatman holders for use with membrane filters.

Borosilicate glass filtration apparatus accomodates 75mm membrane filters. The new design utilizes a PTFE Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…

…and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 025 Series GV 025/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories Cytiva offers a choice of Whatman holders for use with membrane filters.

…temperatures. As specified for the analysis of water and waste samples in the Standard Methods for the Examination of Water and Wastewater (1992) Retains precipitates such as silver chloride Compares favorably with fritted glass filter crucibles Maximum usable temperature 500°C

…under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/…

For supporting funnels, Gooch crucibles, filter tubes, etc., in filtration assemblies Particularly suitable for Buchner and fritted glass funnels, porcelain filters without head pieces and for reverse flow cleaning of filter crucibles Adapters will withstand autoclaving Taper angle in all sizes…

Buchner filter funnel featuring a standard taper, drip-tip bottom joint and a vacuum source hose connection. Available in various sizes and porosities.

…silicone sealing ring Glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Recommended for general filtration Includes a coarse porosity (40-60 μm) fritted glass support base, 300mL…

…glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. The holder utilizes a 25mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel and base. While the sintered glass frit support…