Glass Fiber Filters

Compare Tool

Select up to 3 products

Glass Fiber Filters
1 - 32 of 158
Sort
View
Show
  • Depth filters with high particle loading capacity. Made of 100% borosilicate. Temperature resistant up to 500 °C. Typically placed directly on top of other membrane filters to act as a prefilter; or may be used to filter solutions directly.

  • …disc filters are available in a wide range of flow rates and throughput capacities. Glass fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar). Glass Fiber Filters with Binder Resin Millipore filters with binder…

  • Minisart PLUS

    Sartorius

    Minisart Plus: Fast, sterile filtration of high particulate liquids. Surfactant-Free Cellulose Acetate membrane (SFCA) and binder-free glass fiber (GF) depth pre-filter.

  • …the solution may need to be filtered through a glass fiber filter. STM 4500-P.C Phosphorus in Water: Vanadomolybdophosphoric Acid Colorimetric Method During sample preparation a glass fiber filter may be used as a pre-filter before the membrane filter. Grade 161 is suitable. Activated…

  • AP40 Glass Fiber Filter

    MilliporeSigma

    This 90 mm hydrophilic Glass Fiber filter with a 0.7 µm pore size is recommended prefilter for 0.9 to 8um filters, especially for proteinaceious & heavily contaminated liquids. Can be sterilized by EO, gamma & autoclave. Filter Color: White Thickness: 475 µm …

  • Pall® Glass Fiber Filters

    Pall Laboratory

    …clogging when filtering difficult-to-filter or highly contaminated solutions. Extends filter life and reduces final filter changes with high capacity prefilters. Eliminates sample contamination. Binder-free borosilicate glass fiber has no added extractables. Filters a wide range of…

  • Finneran 25mm Glass Fiber Syringe Filters are available in 0.2um and 0.45 um pore size. Autoclavable.

  • …borosilicate glass, binder-freeExtends life of final filter membraneCytiva Whatman GMF 150 prefilters are multilayer graded density filters for rapid and efficient filtration of samples with high solids content. Multilayer filter design When a sample is applied, the multigrade glass filter traps…

  • Finneran 25mm Glass Fiber Robot Filters were developed specifically for automated sample filtration systems. Autoclavable.

  • Glass Fiber Filter Disks

    Celltreat Scientific

    Glass Fiber Filter Disks are an ideal prefilter to prevent clogging when filtering viscous or particulate-laden solutions with CELLTREAT Scientific Products vacuum Filter Systems and Bottle Top Filters. Increase filtration speed by removing larger part

  • Finneran 25mm Glass Fiber Automatic Filters are suitable for manual and automated filtrations. Ideal for sample volumes up to 10mL. Autoclavable.

  • TSS Filters are recommended for use in Standard Methods 2540 C and 2540 D. Optimized surface characteristics of this binderless borosilicate glass microfiber filter eliminates pin-holing and fiber-shedding to ensure consistent, accurate results comparable to 934-AH® brand filters. Fast flow…

  • …disc filters are available in a wide range of flow rates and throughput capacities. Glass fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar). Glass Fiber Filters without Binder Resin The filters without…

  • Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Highly resistant to chemical attack and biologically inert. Binder-free and thermostable to 500°C. These grades are recommended primarily used in environmental air monitoring applications. Grade…

  • ProWeigh Filters for TSS

    Environmental Express

    … All ProWeigh filters are prepared according to Standard Methods requirements. 47mm binderless glass fiber filters are weighed, washed 3 times in deionized water, dried at 105C and weighed to 0.1mg. Filters come packaged in a labeled aluminum pan with the weight of the filter printed on the label.…

  • Acrylic binder High dirt holding capacity Biologically inert Bonding reduces media migration

  • Grade GF/C is the standard filter in many parts of the world for the collection of suspended solids in potable water and natural and industrial wastes. Grade GF/C: 1.2 µm Combines fine particle retention with good flow rate. Fast and efficient clarification of aqueous liquids…

  • Advantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for…

  • No binder extractables Recommended for temperatures up to 510°C (950°F). Porosity micron: 1 Sterile: No Hydrophobic : No Kind : disk Dimension mm : 90 Grade : Plain Pad : NA

  • …Recommended prefilter for 0.2 to 0.6 µm filters Type AP20 Lower retention, higher dirt-holding capacity than AP15 filters Recommended prefilter for 0.8 to 8.0 µm filters Use upstream to protect type AP15 filters Type AP25 Added thickness yields…

  • …efficiency rating of the filter is characteristic of the complex pore structure that develops as the fibers overlap. The fibrous material within the filter is commonly glass micro fiber or polypropylene. In depth filters such as glass micro fiber, the purity of the filter is dictated by the presence…

  • …accurate, reproducible emission testing by providing low extractable levels and temperature resistance up to 800°C. Cytiva business also offers glass and cellulose extraction thimbles. Emission testing and particulate monitoring applications Emission testing and smoke stack gas sampling …

  • 13mm Syringe Filters

    J.G. Finneran

    Finneran 13mm Syringe Filters with glass fiber membranes are available in 1.0um, 2.0um and 5.0um pore sizes. Glass fiber membranes have fast filtration flow, elminate sample contamination and have good chemical compatibility. Finneran syringe filters are autoclavable.

  • glass. GF/F offers very fine particle retention and good loading capacity and flow rate. 0.7 µm nominal particle retention Served as the basis filter for EPA standard for the toxicity characteristic leaching procedure Cytiva Whatman brand glass microfiber filters provide…

  • Syringe Filter: Glass Fiber

    Graphic Controls

    A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: GF -…

  • Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Organic binder gives these filters higher wet strength and lower fiber release compared to binder-free grades. Thermostable to 120°C. Recommended for high pressure filtration, applications requiring wet…

  • …efficiency rating of the filter is characteristic of the complex pore structure that develops as the fibers overlap. The fibrous material within the filter is commonly glass micro fiber or polypropylene. In depth filters such as glass micro fiber, the purity of the filter is dictated by the presence…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.