Glass Centrifuge Tubes

Compare Tool

Select up to 3 products

Glass Centrifuge Tubes
1 - 32 of 123
Sort
View
Show
  • These 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…

  • Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. Tubes are plastic shrink…

  • tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall construction, short conical bottom tube with…

  • 16mm Snap Cap for Tubes

    Globe Scientific

    …colorful snap on closures are an effective way to recap 16mm blood drawing tubes and glass test tubes. They are precision molded from low-density polyethylene (LDPE) and maintain a tight seal during centrifugation, agitation and refrigeration procedures. They are equipped with a single thumb…

  • Centrifuge Tubes

    Chemglass

    TUBES, CENTRIFUGE, 50ML, Centrifuge tube with a short, conical bottom and 24-415 GPI threaded top. Fits I.E.C. shield number 320. Supplied complete with a Poly-Seal® polypropylene lined phenolic screw cap. TEST TUBE TONGS, Tongs are made of zinc coated steel, 6" overall length. Spring…

  • Borosilicate glass Capacity: 6.5 mL Narrow tip 15 mL shields Graduations (mL): stem to 0.4 in 0.01 from 0.4 to 1 in 0.1 at 1.5, 2.0, 3.0, 4.0 and 6.5 (body)

  • Made with heavier walled tubing to withstand higher centrifugation speeds Top has screw thread finish Cap with rubber liner is included but not attached Replacement cap is 45066B Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438,…

  • …for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with more consistent…

  • KIMAX Ungraduated Centrifuge Tubes

    DWK Life Sciences (Kimble)

    …50 mL sizes, both of which are 29 mm o.d. and fit 50 mL shields Length of 50 mL size, which is approximately 126 mm, makes it incompatible for some centrifuge and rotor combinations; overall length of 35 mL size is 106 mm. Complete with unattached black plastic cap with cemented rubber liner.

  • …cap for 1215F92 is 45066C 1215F92 is a large-capacity, 100mL tube with screw thread closure Manufactured to the specifications found in ASTM 2158 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Variable Speed Mini Orbitron™ Nutating Mixers

    labForce (a Thomas Scientific Brand)

    …of blood tubes, centrifuge tubes, glass vials or plates. Variable speed from 4-24 rpm's Low profile and small footprint minimizes bench space Extremely quiet Provides gentle, continuous mixing of specimens Accommodates avariety of blood tubes and centrifuge tubes Includes…

  • KIMAX Culture/Test Tubes

    DWK Life Sciences (Kimble)

    …marking spot on each tube ·         Designed from ASTM Specification E982, Type I requirements ·         Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type…

  • Graduated Reusable Centrifuge Tubes

    DWK Life Sciences (Kimble)

  • High Strength Centrifuge Tubes

    DWK Life Sciences (Kimble)

    …strengthened Can be centrifuged up to 13,100 RCF (with appropriate rubber sleeve adapter in a 50 mL rotor cavity) 15 mL and 30 mL reusable tubes achieve greater mechanical strength than standard glass centrifuge tubes. Manufactured from Type 1, Class B, borosilicate glass, they are fully…

  • For Eppendorf Model 5702 centrifuges Maximum rcf: 2,750 x g Aluminum rotor available with 10 or 30 steel sleeves, depending on the number of samples (max. 20 x 15 ml Falcon® tubes) Centrifugation of 15 ml Falcon tubes and glass test tubes Supplied inserts allow symmetrical heterogeneous loading

  • Without stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations:  from 1 to 5 mL in 1 mL   from 5 to 50 mL in 5 mL   from 50 to 100 mL in 10 mL divisions

  • Kimble Oil Centrifuge Tubes

    DWK Life Sciences (Kimble)

    … Oil Centrifuge Tube (2623Q33) In accordance with ASTM D 96 Capacity 125 mL Graduations: from 5 to 10 in 1 from 10 to 25 in 5 at 50 and 100 per ASTM Standard D 96 Fits Thomas number 2525C07 Carrier and 2525C05 Rotor in IEC Centrifuges.

  • Tube 10 ml

    Corning

    These 10mL PYREX® conical centrifuge tubes are used in connection with the Wasserman test. Also used to measure H2O content and potassium ions in oil muds. API RP 13B standard testing method. They are graduated in 0.1 mL divisions up to 4 mL, and 0.2 mL divisions from 4 to 10 mL …

  • These glass capillary tubes are designed for both safe blood collection as well as accurate micro-hematocrit determinations. Precision molded, they provide excellent sample retention during centrifugation. In addition, the tubes fill rapidly without affecting specimen integrity. The tubes are…

  • Capillary Tip Centrifuge Tube

    Wilmad-LabGlass - SP Scienceware

    Designed for use in ASTM D-2273 and ASTM D-2709, this borosilicate glass capillary tipped long form centrifuge tube is 200mm in length.

  • 16mm Snap Caps

    Globe Scientific

    …colorful snap-on closures are an effective way to recap blood drawing tubes, glass test tubes and plastic culture tubes. They are precision molded from low-density polyethylene (LDPE) and maintain a tight seal during centrifugation, agitation and refrigeration procedures. They are available in…

  • Uniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.

  • Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

  • Capillary Tip Centrifuge Tubes

    Wilmad-LabGlass - SP Scienceware

    This long form 100mL capacity oil centrifuge tube has a capillary tip that makes it ideal for use when only small amounts of solids are present. Made of borosilicate glass, its approximate widest O.D. is 38mm and approximate length is 200mm. Reference No. ASTM D 2709

  • Tube Centrifuge Graduated 50ml

    DWK Life Sciences (Kimble)

  • Use this box to recycle your used and empty plastic centrifufge tubes and other rigid lab plastics, including plastic bottles, trays and vials. Please choose the size box you'd like to purchase. When you receive your box fill it with the appropriate waste streams. Once full ship your box…

  • These 100mL PYREX® pear-shaped centrifuge tubes are used for determination of water and sediment in petroleum products. They are fabricated from mold-blown blanks to insure uniform shape and greater mechanical strength. The scale and figures are durable white enamel which stand out clearly against…

  • …All the tubes have the CE-mark and most are US FDA cleared. Serum The inner wall of the serum tube is specially coated with microscopic silica particles, which activate the coagulation process. Serum separator tubes contain a separation gel in the base of the tube; during centrifugation, this…

  • BioReaction

    Chemglass

    …SAMPLE TUBES, A coaxial insert consists of an upper glass alignment tube with a precise outer diameter that fits very closely within the matching 5mm or 10mm thin wall outer glass NMR tube, ensuring accurate coaxiality and centering of the insert within the outer NMR tube.The lower glass stem tube,

  • Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to…

  • Long Oil Centrifuge Tube, TC

    Wilmad-LabGlass - SP Scienceware

    Calibrated "to contain" (TC), this borosilicate glass long oil centrifuge tube is used for determinations of water and sediment in petroleum and its products, including fuel oils and lubricating oils. See ASTM Methods D 96, D 1796 and D 91 and also API Code 2500. Reference No. ASTM D…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.