Glass Bottom Plate

Compare Tool

Select up to 3 products

Glass Bottom Plate
1 - 32 of 68
Sort
View
Show
  • Krystal™ glass bottom plates are manufactured for whole-plate CCD imaging and laser detection applications, Krystal glass bottom plates consist of a polystyrene upper part and a clear borosilicate glass sheet fixed to the base with a proprietary adhesive. This process results in consistent…

  • …measurements are capable in the wavelength range above 350nm. Plates consist of a 175µm thick borosilicate glass-bottom plate bonded with a black polystyrene frame and features a chimney-well to help prevent cross contamination. Plates are sterile, comply with SBS recommendations, and include…

  • …systems. The glass bottom provides a flat and optically clear surface that reduces autofocus time, increases throughput and is ideal for cell growth. High optical quality and scratch resistant glass Glass bottom thickness of 200 µm is well suited for imaging microscopy Bottom flatness …

  • Glass Bottom Cell Culture Plates

    NEST Scientific USA

    …Contrast Microscope for cell observation Can be used for live cells observation Special bottom design for easy grip Imported optical grade cover glass, cover glass thickness: 0.19-0.22 mm Round cover glass insert for good appearance Medical adhesive to guarantee non-cytotoxicity

  • …stirrer now in new design. Digital speed display (LED) Electronically controlled motor for more capacity Higher speed range from 0 - 2.500 rpm Max. stirring quantity 1 l Outstanding chemical resistance due to glass top and synthetic bottom made of TPC-ET Recyclable materials

  • Upright Polarizing Compound Microscopes

    labForce (a Thomas Scientific Brand)

    …compensators, wave plates, Bertrand lens and a circular stage capable of rotating 360-degrees. Dependable and Reliable labForce Polarizing Microscopes enjoy all the same benefits of the labForce Upright Light Compound Microscopes : 5 year warranty, all metal and glass components that…

  • Krystal™ glass bottom plates are manufactured for whole-plate CCD imaging and laser detection applications, Krystal glass bottom plates consist of a polystyrene upper part and a clear borosilicate glass sheet fixed to the base with a proprietary adhesive. This process results in consistent…

  • …promotes more efficient heat transfer Reusable anodized aluminum metal plate prevents finger print smudges and discoloration to allow years of use Ideal for freeze drying samples Choice of glass conical and flat bottom vials in 4 sizes: 0.5mL, 1.0mL, 1.5mL and 2.0mL Choose a sealing…

  • …Plus glass bottom microplate is designed for FCS and demanding microscopic applications. Like the classic SensoPlate™ models from Greiner Bio-One, the SensoPlate™ Plus glass bottom plate consists of a black frame upon which a 175μm thick borosilicate glass bottom plate is glued.…

  • Krystal™ glass bottom plates are manufactured for whole-plate CCD imaging and laser detection applications, Krystal glass bottom plates consist of a polystyrene upper part and a clear borosilicate glass sheet fixed to the base with a proprietary adhesive. This process results in consistent…

  • A comprehensive line of 96-well microplates for chromatography, the Plate Sampling System™ uses closures familiar to those who work with standard chromatography vials. Polypropylene μLplates™ have a variety of closures that will stabilize the sample during the analytical sample…

  • …only in stainless steel models 3383L60 and L70.  The two rotors are different sizes and cannot be interchanged. Front Glass Plate: Safety glass, 75 mm square, for all Wiley® Mini-Mills. Belt Guard: Steel construction, completely encloses belt and pulleys. As supplied on…

  • 10 cm Latch-Lid Chromatotank

    General Glass Blowing

    …x 10 cm plates The smaller cubic inch chamber allows for a faster and more uniform solvent-saturated atmosphere. Single molded tank has a flat ground top, beveled for safety on the inner and outer rims; bottom has been ground for stability. Unique latching device holds the matching ground glass

  • Multiple Well Plates

    Celltreat Scientific

    plates Suitable for dot-blotting bacterial clones on 11.4 x 7.3 cm (4.5 x 2.875 inches) nylon membranes Lids contain molded spacers to allow gas exchange and stacking rings for increased stability Thomas Nos. 1177Y91 and 1177Y92 Recessed, consistent borosilicate glass bottom

  • TLC Developing Tank with Latch Lid

    DWK Life Sciences (Kimble)

    …from sturdy molded glass bricks that will withstand regular use for many years Clear sides allow unobstructed visual inspection of TLC plates up to 20 x 20 cm in size Top of tank is ground flat to match the lid, and the edges are beveled to remove any sharp edges Bottom is ground to provide…

  • …transparent bottom is molded, not adhered, to an acrylic top for maximum leak resistance Ideal for UV absorbance readings with low background, especially at 260 and 280 nm Flat bottom wells have volume of 370 µL UV-Plate has a special material molded onto the bottom that is…

  • Rectangular Developing Tank

    General Glass Blowing

    …edges Raised ridge midway on the inside ends and bottom for developing two 20 x 20 cm plates or the equivalent Inside dimensions: 27 x 7 x 26 cm Supplied with flat glass lid, 30 x 10 x 3 cm Molded glass block of clear glass with flat surface walls, ground lip of uniform flatness.

  • …cover glass for minimum light scatter and low auto-fluorescence Optimum clarity for viewing Flat bottom well for plate reader access Rounded square wells eliminate wicking Footprint compatible with standard equipment and automated systems Non-treated plates are…

  • Heating mantles are preferred over Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series STM mantle for applications needing more heat. Aluminum Housed Mantles Feature: Rigid…

  • Glass-Backed HPTLC Plates

    Miles Scientific (Analtech)

    …in diameter. Samples are spotted 1.0 to 1.5 cm from the bottom edge of the plate and 0.3 to 0.5 cm apart. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard TLC techinques. The smooth homogeneous…

  • …differentiation and adhesion of transfected cell lines Poly-L-Lysine (PLL) are synthetic molecules used to enhance cell attachment to plastic and glass surfaces. For many anchorage-dependent cells, the nature of the culture substrate has a major effect on cell growth and the requirement for serum…

  • …and has been optimized with the Amersham InCell 3000 Analyzer. Its ultra flat thick well bottom is designed for high throughput imaging by minimizing microscope refocusing from well to well. TC-treated for optimal cell attachment it offers better cell growth and attachment than glass bottom plates.

  • Flat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.

  • Rectangular Developing Chambers

    General Glass Blowing

    …the TLC laboratory is a sturdy, molded-glass block of clear glass with flat surface walls, ground lip of uniform flatness, beveled inside and outside to remove any sharp edges. There is a raised ridge midway on the inside ends and bottom of the jar. Inside dimensions measure 27cm D x 7cm W x 26cm H…

  • …3000 Analyzer. Ultra flat thick well bottom is designed for high throughput imaging by minimizing microscope refocusing from well to well. More economical solution than glass bottom plates. Better cell growth and attachment than glass bottom plates. Black opaque walls to prevent well-to-well…

  • …differentiation and adhesion of transfected cell lines Poly-D-Lysine (PDL) are synthetic molecules used to enhance cell attachment to plastic and glass surfaces. For many anchorage-dependent cells, the nature of the culture substrate has a major effect on cell growth and the requirement for serum…

  • …1.5 thickness, German, Desag 263 glass coverslip bonded to the bottom of the dish for high N.A. applications and are also available with 0.5mm thick glass for low N.A. applications. They have an electrically conductive, optically transparent, ITO coating on the bottom surface of the dish that when…

  • …low birefringence and a refractive index of 1.53 comparable to glass. Furthermore, thy enable complete periphery access for high magnification objectives and are entirely manufactured out of cycloolefin with a black pigmented cycloolefin frame and a 190 μm ultraclear cycloolefin film bottom.

  • Joey™ Protein Gel Caster

    Owl Separation Systems

    …Spacer plate provides even pressure across gel. Adjustable thumb screw clamping system makes casting gels extremely easy. Three-point leveling system ensures uniform gel casting and two rear stabilizing screws prevent stand from rocking. There are no air spaces between glass plates and the bottom of…

  • The improved magnetic stirrer now in new design. Digital speed display (LED) Electronically controlled motor for more capacity Higher speed range from 0 - 2.500 rpm Outstanding chemical resistance due to glass top and synthetic bottom made of TPC-ET Recyclable materials

  • …characteristics. Versatile. A broad range of filtration media is available, including glass fiber, polypropylene, cellulose nitrate, cellulose acetate, nylon, and ion exchange cellulose. This 384-well filter plate has been successfully used for DNA template clean-up, cell capture, and for…

  • …filter media allows control of the flow rates and retention characteristics. Versatile. A broad range of filtration media is available, including glass fiber, polypropylene, cellulose nitrate, cellulose acetate, nylon, and ion exchange cellulose. No cross talk. Patented integral filter design…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.