Glass Bottom Plate

Compare Tool

Select up to 3 products

Glass Bottom Plate
1 - 32 of 112
Sort
View
Show
  • UNIFILTER 96-Well 2mL Microplates

    GE Healthcare

    …media for the 2 ml chemically resistant filter plate are PKP and GF/D. Both are chemically resistant with the PKP used for retaining solvent, while the GF/D is used for fast flow rates. Proprietary Whatman UNIFILTER microplates with filter bottom wells are convenient and ready to use. Available…

  • UNIFILTER 384-Well 100µL Microplates

    GE Healthcare

    …characteristics. Versatile. A broad range of filtration media is available, including glass fiber, polypropylene, cellulose nitrate, cellulose acetate, nylon, and ion exchange cellulose. This 384-well filter plate has been successfully used for DNA template clean-up, cell capture, and for…

  • 4-Gel Caster Complete

    GE Healthcare

    …buffer chamber with integrated clamps. Simply assemble the gel sandwich of plates and spacers, clamp it onto the upper buffer chamber, then pivot the sealing gasket and cast the gel. After polymerization, simply release the bottom seal and drop the assembly into the tank for running. No extra parts…

  • Gel Casters–Small Format Vertical Electrophoresis

    GE Healthcare

    …Pour uniform gels from the top; pump gradient gels into an inlet port at the bottom of the unit Sandwiches fill at the same time at the same rate from the same solution. The result: identical gels Glass plate sandwiches seal leak free without the use of messy grease or tape Once cast,…

  • UNIFILTER 24-Well 10mL Microplates

    GE Healthcare

    …filter media allows control of the flow rates and retention characteristics. Versatile. A broad range of filtration media is available, including glass fiber, polypropylene, cellulose nitrate, cellulose acetate, nylon, and ion exchange cellulose. The polypropylene construction of the 10…

  • UNIFILTER 96-Well 800 µl Microplate

    GE Healthcare

    …filter media allows control of the flow rates and retention characteristics. Versatile. A broad range of filtration media is available, including glass fiber, polypropylene, cellulose nitrate, cellulose acetate, nylon, and ion exchange cellulose. No cross talk. Patented integral filter design…

  • UNIFILTER 96-Well 800µL Microplates

    GE Healthcare

    …filter bottom wells are convenient and ready to use. Available in 24-, 96-, and 384-well formats, UNIFILTER microplates offer a choice of filter media to meet exact application requirements. Whatman Dye Terminator Removal microplates are available in 96- and 384-well formats. These plates can…

  • miniVE Vertical Electrophoresis System

    GE Healthcare

    …buffer chamber with integrated clamps. Simply assemble the gel sandwich of plates and spacers, clamp it onto the upper buffer chamber, then pivot the sealing gasket and cast the gel. After polymerization, simply release the bottom seal and drop the assembly into the tank for running. No extra parts…

  • Corning® High-Content Imaging Glass Bottom Microplates

    Corning

    …systems. The glass bottom provides a flat and optically clear surface that reduces autofocus time, increases throughput and is ideal for cell growth. High optical quality and scratch resistant glass Glass bottom thickness of 200 µm is well suited for imaging microscopy Bottom flatness …

  • 96-Well Solid Aluminum Base Plate and the Vented Aluminum Base Plate

    J.G. Finneran

    …promotes more efficient heat transfer Reusable anodized aluminum metal plate prevents finger print smudges and discoloration to allow years of use Ideal for freeze drying samples Choice of glass conical and flat bottom vials in 4 sizes: 0.5mL, 1.0mL, 1.5mL and 2.0mL Choose a sealing…

  • SensoPlate™ Plus Glass Bottom Microplates

    Greiner Bio-One

    …Plus glass bottom microplate is designed for FCS and demanding microscopic applications. Like the classic SensoPlate™ models from Greiner Bio-One, the SensoPlate™ Plus glass bottom plate consists of a black frame upon which a 175μm thick borosilicate glass bottom plate is glued.…

  • Glass Bottom Cell Culture Plates

    NEST Scientific USA

    …Contrast Microscope for cell observation Can be used for live cells observation Special bottom design for easy grip Imported optical grade cover glass, cover glass thickness: 0.19-0.22 mm Round cover glass insert for good appearance Medical adhesive to guarantee non-cytotoxicity

  • SensoPlate™ Glass Bottom Microplates

    Greiner Bio-One

    …measurements are capable in the wavelength range above 350nm. Plates consist of a 175µm thick borosilicate glass-bottom plate bonded with a black polystyrene frame and features a chimney-well to help prevent cross contamination. Plates are sterile, comply with SBS recommendations, and include…

  • Corning® BioCoat™ Poly-D-Lysine Multiwell and Assay Plates

    Corning

    …differentiation and adhesion of transfected cell lines Poly-D-Lysine (PDL) are synthetic molecules used to enhance cell attachment to plastic and glass surfaces. For many anchorage-dependent cells, the nature of the culture substrate has a major effect on cell growth and the requirement for serum…

  • Delta T™ Culture Dishes

    Bioptechs

    …1.5 thickness, German, Desag 263 glass coverslip bonded to the bottom of the dish for high N.A. applications and are also available with 0.5mm thick glass for low N.A. applications. They have an electrically conductive, optically transparent, ITO coating on the bottom surface of the dish that when…

  • Corning® BioCoat™ Poly-D-Lysine/Laminin, Poly-L-Ornithine/Laminin, and Laminin…

    Corning

    …rigorously tested to assure product consistency and performance. Applications include: Enhancement of neuronal cell attachment to plastic and glass Promotion of neurite outgrowth Culture of glial cells as feeder layers for neurons Construction of neural cell model systems to study CNS…

  • Corning® BioCoat™ Poly-L-Lysine Multiwell and Assay Plates

    Corning

    …differentiation and adhesion of transfected cell lines Poly-L-Lysine (PLL) are synthetic molecules used to enhance cell attachment to plastic and glass surfaces. For many anchorage-dependent cells, the nature of the culture substrate has a major effect on cell growth and the requirement for serum…

  • Multiple Well Plates

    Celltreat Scientific

    plates Suitable for dot-blotting bacterial clones on 11.4 x 7.3 cm (4.5 x 2.875 inches) nylon membranes Lids contain molded spacers to allow gas exchange and stacking rings for increased stability Thomas No. 1177Y91 and 1177Y92 Recessed, consistent borosilicate glass bottom

  • 24-Well Krystal™ Glass Bottom Imaging Plates

    Porvair

    Krystal™ glass bottom plates are manufactured for whole-plate CCD imaging and laser detection applications, Krystal glass bottom plates consist of a polystyrene upper part and a clear borosilicate glass sheet fixed to the base with a proprietary adhesive. This process results in consistent…

  • UV Plate 96 Well, Flat Bottom, Cs 50

    Corning

    …transparent bottom is molded, not adhered, to an acrylic top for maximum leak resistance Ideal for UV absorbance readings with low background, especially at 260 and 280 nm Flat bottom wells have volume of 370 µL UV-Plate has a special material molded onto the bottom that is…

  • 96-Well Krystal™ Glass Bottom Imaging Plates

    Porvair

    Krystal™ glass bottom plates are manufactured for whole-plate CCD imaging and laser detection applications, Krystal glass bottom plates consist of a polystyrene upper part and a clear borosilicate glass sheet fixed to the base with a proprietary adhesive. This process results in consistent…

  • Glass-Backed HPTLC Plates

    Miles Scientific (Analtech)

    …in diameter. Samples are spotted 1.0 to 1.5 cm from the bottom edge of the plate and 0.3 to 0.5 cm apart. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard TLC techinques. The smooth homogeneous…

  • 384-Well Krystal™ Glass Bottom Imaging Plates

    Porvair

    Krystal™ glass bottom plates are manufactured for whole-plate CCD imaging and laser detection applications, Krystal glass bottom plates consist of a polystyrene upper part and a clear borosilicate glass sheet fixed to the base with a proprietary adhesive. This process results in consistent…

  • IKAMAG® Color Squid Magnetic Stirrers

    IKA Works

    …stirrer now in new design. Digital speed display (LED) Electronically controlled motor for more capacity Higher speed range from 0 - 2.500 rpm Max. stirring quantity 1 l Outstanding chemical resistance due to glass top and synthetic bottom made of TPC-ET Recyclable materials

  • 384 Well CVG Cell Culture Optical Bottom Plates

    Thermo Scientific Nunc

    …cover glass for minimum light scatter and low auto-fluorescence Optimum clarity for viewing Flat bottom well for plate reader access Rounded square wells eliminate wicking Footprint compatible with standard equipment and automated systems Non-treated plates are…

  • 384-Well Microplates

    Corning

    …and has been optimized with the Amersham InCell 3000 Analyzer. Its ultra flat thick well bottom is designed for high throughput imaging by minimizing microscope refocusing from well to well. TC-treated for optimal cell attachment it offers better cell growth and attachment than glass bottom plates.

  • Corning® 384 Well Optical Imaging Flat Clear Bottom Black Polystyrene TC-Treated…

    Corning

    …3000 Analyzer. Ultra flat thick well bottom is designed for high throughput imaging by minimizing microscope refocusing from well to well. More economical solution than glass bottom plates. Better cell growth and attachment than glass bottom plates. Black opaque walls to prevent well-to-well…

  • High Temperature Heating Mantles for Round Bottom Flasks

    Glas-Col

    Heating mantles are preferred over Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series STM mantle for applications needing more heat. Aluminum Housed Mantles Feature: Rigid…

  • Denville Vertical Electrophoresis 10 x 10cm Twin-Plate Gel Systems, Accessories…

    Hoefer

    …- snap-lock connectors allow E4101 and E4101-Y to be connected to the external chiller unit. Glass plate stops (in E4100-Y and E4101-Y) - within the newly modified GRM - lock the glass plates firmly into position onto soft silicone gaskets in the casting base to ensure leak-free gel casting.…

  • Denville Vertical Mini Size 10 x 10 cm Twin Plate Vertical gel unit

    Vari-Gel™

    …x 10cm) plain glass plates, 4X 1mm spacers, 2X spacer aligners, 2X (10 x 10cm) notched glass plates, 1X dummy plate and 2X 1mm thick 12-sample combs. Enhanced cooling - snap-lock connectors allow E4101 and E4101-Y to be connected to the external chiller unit. Glass plate stops (in E4100-Y…

  • Denville Vertical Cooled Mini Size 10 x 10cm Twin Plate Vertical gel unit with…

    Denville

    …running module, gel tank with built-in cooling coil and quick-fit tubing, lid, 2X (10 x 10cm) plain glass plates, 4X 1mm spacers, 2X spacer aligners, 2X (10 x 10cm) notched glass plates, 1 x dummy plate and 2X 1mm thick 12-sample combs, plus casting base and 2X silicone seals. Enhanced cooling…

  • Denville Vertical Mini Size 10 x 10 cm Twin Plate Vertical gel unit with Casting…

    Denville

    Includes gel running module, gel tank, lid, 2X (10 x 10cm) plain glass plates, 4X 1mm spacers, 2X spacer aligners, 2X (10 x 10cm) notched glass plates, 1 x dummy plate and 2X 1mm thick 12-sample combs, plus casting base and 2X silicone seals. Enhanced cooling - snap-lock connectors allow E4101…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.