Glass Bottles Pressure

Compare Tool

Select up to 3 products

Glass Bottles Pressure
1 - 32 of 638
Sort
View
Show

  • DURAN® Pressure Plus Bottles

    DWK Life Sciences (Duran)

    The DURAN® pressure plus+ GL 45 bottles offer a safer option for laboratory applications involving vacuum or pressure. Standard glass laboratory bottles are not designed to safely withstand pressure differentials. As a result of a modified geometry, the pressure plus+ bottles have a guaranteed…

  • bottles should not be used with bottle top filler units, or in other applications involving vacuum pressure as breaking may occur. Do Not tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. Note: Most GL45 threaded caps designed for glass

  • …be used with glass under pressure. Maximum safe pressure depends on service conditions. Pressure rating of the vessels decreases 0.25 psi per° F over room temperature. Surface scratches on glass cause weakening. ADDITIONAL SHIELDING IS STRONGLY RECOMMENDED. Pressure for new bottles should not…

  • HDPE Wide Mouth Laboratory Bottles

    labForce® (a Thomas Scientific Brand)

    …“economy” bottles Cap and bottle designed with semi-buttress threads for better performance than round threads HDPE and PP are resistant to most corrosives and suitable for a wide variety of laboratory uses Plastic laboratory bottles are lighter than glass for improved handling…

  • …storing high performance, low pressure liquid chromatography mobile phase, sparging preventing bubbles from entering the system as well as collecting sample waste.The bottle is blue tinted plastic coated flat bottom, which provides additional safety by containing the glass fragments from accidents…

  • Ace Glass pressure tubes and bottles are the premier glass pressure vessels in the industry. Flat-bottomed bottles are rated at 60psi at room temperature while our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breaking under…

  • PP Wide Mouth Laboratory Bottles

    labForce® (a Thomas Scientific Brand)

    …“economy” bottles Cap and bottle designed with semi-buttress threads for better performance than round threads HDPE and PP are resistant to most corrosives and suitable for a wide variety of laboratory uses Plastic laboratory bottles are lighter than glass for improved handling…

  • …Round Bottles offer maximum visibility and sample integrity. The safety coating on these bottles protects the container from being affected by pressure build up. If the glass breaks, the plastisol coating contains the substance in the bottle long enough to allow for proper disposal. These bottles

  • HDPE Narrow Mouth Laboratory Bottles

    labForce® (a Thomas Scientific Brand)

    …“economy” bottles Cap and bottle designed with semi-buttress threads for better performance than round threads HDPE and PP are resistant to most corrosives and suitable for a wide variety of laboratory uses Plastic laboratory bottles are lighter than glass for improved handling…

  • …on these bottles protects the container from being affected by pressure build up. If the glass breaks, the plastisol coating contains the substance in the bottle long enough to allow for proper disposal. These bottles are slip and impact resistant, making them the perfect bottle for handling…

  • Pressure Globe

    GSC International, Inc.

    The Harbottle Pressure Globe helps students to understand the meaning of fluid pressure and pressure reduction. Simply place a balloon into the opening of the glass Harbottle and stretch the mouth of the balloon over the opening of the bottle. Blow into the balloon and, when it is fully inflated,…

  • Heavy wall glass storage bottles with #15 Ace-Thred are intended only for storage of low-boiling liquids at room temps or at not less than -20°deg;C. Designed to resist internal pressures up to 100 psi, as low as -20°deg;C. The low pressure rating based primarily on the rating for PTFE…

  • Large Volume Serum Bottles

    DWK Life Sciences (Kimble)

    …solutions, where glass stability is important For all procedures involving either hot air or steam pressure sterilization Not suitable for direct application of flame Necks are 35 mm i.d., smoothly finished to take cotton plug, cork or size 8 rubber stopper Dimensions: 4 liter bottle measures…

  • …or liquefied gases whose reactive nature or pressure precludes use of glass bottles. Because Sure/Pac cylinders are made of steel they are virtually unbreakable, and their wider base makes them more resistant to tipping over than a glass bottle. When fitted with the Sure/Seal ball valve allows…

  • Flow Cell Assemblies

    IBI Scientific

    …govern pressure on passing liquid to help mitigate peristaltic pulsation. Also available are a luer connector and tube rack of effluent collection to collect effluent material for analysis. The Complete 3-Channel Flow Cell Assembly comes complete with 3-Channel flow cell with #1 glass cover slip,…

  • E-Vac Aspiration System

    Argos Technologies

    …polypropylene bottle or a 3L glass bottle. Polypropylene and glass bottles offer lids equipped with quick-release tubing connectors for safe and convenient tubing connections; and level detection sensor that automatically shuts the pump off when the bottle is full. Polypropylene bottles are also…

  • The DURAN pressure plus+ GL 45 bottles offer a safer option for laboratory applications involvingvacuum or pressure. Standard glass laboratory bottles are not designed to safely withstand pressure differentials.As a result of a modified geometry, the pressure plus+ bottles have a guaranteed…

  • PTFE sealed-in gas permeable membrane. Reduces risk of excess internal pressure. Can be tightened during autoclaving.

  • 14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,

  • Ace Glass pressure tubes are the premier glass pressure tubes in the world, rated at 150 psig at 120 degrees C. Featuring a #7 Ace-Thred sample port, these tubes offer the convenience of sampling while remaining connected to the researcher's apparatus. Due to varying conditions, Ace cannot guarantee…

  • …coating on these bottles protects the container from being affected by pressure build up. If the glass breaks, the plastisol coating contains the substance in the bottle long enough to allow for proper disposal. These bottles are slip and impact resistant, making them the perfect bottle for handling…

  • Chemically resistant and stable laboratory bottles, approved for use vacuum or pressure. rated at -1 to +1.5 bar, (-14.5 to +21.7PSI). Bottle only with blue graduations, without cap or pour ring. For cap and ring see 7622. Available clear, amber or plastic coated. Temperature range up to 140°…

  • Polysulfone Bottle-Top Filter Holders

    Thermo Scientific Nalgene

    Convenience of a bottle top filter with the ability to re-use the filter housing Nalgene 320 Autoclavable Securely screws onto glass media bottles* with 33 mm or 45 mm neck sizes Deep screw threads attach directly to bottle allowing convenient filling and vacuum filtration without…

  • Pressure filtration devices with a sample loading cylinder are suitable for batch filtration of samples from 20 ml. Devices without infusion cylinders are connected inline and are suitable for larger volumes of several liters. Pressure filtration devices with a sample loading cylinder are…

  • Application: Useful as a heterogeneous, reusable catalyst for the Knoevenagel condensation. For low- and medium-pressure reversed-phase liquid chromatography. Packaging: 10, 50, 250 g in glass bottle

  • Application: For low- and medium-pressure reversed-phase liquid chromatography Packaging: 25, 100 g in glass bottle

  • …release of excess pressure higher than 3 bars Butyl / PTFE septa for routine analyses; for more demanding analyses and for high temperatures: high purity silicone / PTFE septa Molded Butyl/PTFE septa with an only centrically laminated PTFE layer for excellent sealing on the glass rims Pure…

  • BOD Bottle Accessories

    DWK Life Sciences (Wheaton)

    …Wheaton BOD bottles. This closure prevents the evaporation of the water seal during the five-day BOD incubation period. The foam insert fits into the cap and exerts pressure on the bottle stopper to hold it securely in place. BOD Bottle Aerator (1233M50) has a 40-60 micron porosity glass frit.…

  • …Round Bottles offer maximum visibility and sample integrity. The safety coating on these bottles protects the container from being affected by pressure build up. If the glass breaks, the plastisol coating contains the substance in the bottle long enough to allow for proper disposal. These bottles

  • TFM O-Ring (25x3mm) for Digestion Vessel caps with pressure control (DPC) for Standard 75 mL (40 Bar) Digestion Vessel for Titan MPS 16 Position Microwave Sample Preparation Systems. Quantity: 1 (2 are required per vessel cap)

  • …Round Bottles offer maximum visibility and sample integrity. The safety coating on these bottles protects the container from being affected by pressure build up. If the glass breaks, the plastisol coating contains the substance in the bottle long enough to allow for proper disposal. These bottles

  • …Round Bottles offer maximum visibility and sample integrity. The safety coating on these bottles protects the container from being affected by pressure build up. If the glass breaks, the plastisol coating contains the substance in the bottle long enough to allow for proper disposal. These bottles

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.