Glass Adapter

Compare Tool

Select up to 3 products

Glass Adapter
1 - 32 of 780
Sort
View
Show
  • Glass Plunger Adapter

    Techne (Cole-Parmer)

  • Glass Vacuum Adapters

    United Scientific Supplies

    Vacuum adapters have 24/40 joints. Bent adapter has a 105° angle between the top outer joint and bottom inner joint. Straight adapter has a top outer joint and bottom inner joint. Both adapters have 24/40 joints and include a 3/8" hose connector.

  • Glass Ball Joint Adapter for ELAN

    PerkinElmer

    Glass Ball Joint Adapter for ELAN

  • Glass Inlet or Outlet Adapters

    Julabo

    JULABO Reaction Solutions heavy walled glass inlet / outlet adapters with standard taper ground glass joints and 90° 3/8" single or dual glass hose barbs. For connections to glass apparatus to supply vacuum, pressure, venting or gas supply.

  • Adapters, Flow Control, Glass Stopcock

    Chemglass

    Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.

  • Synthware Vacuum Take-Off Adapters with Glass Stopcocks

    Kemtech America

    Synthware vacuum adapter with 2mm straight bore glass stopcock on the hose connection.The upper outer and lower inner standard taper joints are the same size.

  • Synthware Vacuum/Inert Gas Adapters with Glass Stopcocks

    Kemtech America

    Synthware vacuum or inert gas adapter has a T-bore glass stopcock allowing vessels with a standard taper outer joint to purged and evacuated. The stopcock has a constant pressure retention device and a 4 mm bore.

  • Synthware Vacuum Adapters with Glass Stopcocks, 90°

    Kemtech America

    Synthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.

  • Synthware Vacuum Adapters with Glass Stopcocks, Straight

    Kemtech America

    Synthware vacuum adapter with a serrated hose connection 180 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.

  • Glass 3/8" Hose Barb Tee Adapters

    Across International

    Ai glass 3/8" hose barb tee adapter. Glass material: high borosilicate glass 3.3. Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function.

  • Adapters, Flow Control, Glass Stopcock, 90°

    Chemglass

    Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.

  • Glass and PTFE Straight Adapters with Hose Connection

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass adapters feature a 5/16" O.D. hose connection at top and Standard Taper 24/40 on bottom. With a stopcock between joints, model LG-1711 has a 2mm glass plug and LG-1711T has a 2mm PTFE plug.

  • Standard Glass Cyclonic Spray Chamber Nebulizer Adapter Plug for Optima 2x00…

    PerkinElmer

    This nebulizer adapter plug 16/6 is used with standard glass cyclonic spray chambers (N0776052) in Optima 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments.

  • Glass Cyclonic Spray Chamber and Adapter Assembly for Optima 2x00/4x00/5x00/7x00…

    PerkinElmer

    This kit includes: Glass Standard Cyclonic Spray Chamber (N0776052) Cyclonic Spray Chamber Mount Kit (N0770131) Cyclonic Spray Chamber Mount Nut (N0776005) Cyclonic Spray Chamber Mount Sleeve (N0776004) Cyclonic Spray Chamber Mount Ring (N0776003) 20 mm M4 Cap Screw (09919167) 6 mm M3 Cap…

  • Adapter, Stopcock, Hose Connection, Glass or PTFE plug

    Ace Glass

    Stopcock adapter featuring either a bent or straight hose connection and a glass or PTFE plug. See Ace 8223 for replacement glass plug and Ace 8224-04 for PTFE plug.

  • Synthware Vacuum Adapters with Outer Joints & Glass Stopcocks

    Kemtech America

    Synthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper outer joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.

  • Straight connecting adapter, 4mm glass plug stopcock, 15mm O-Ring top joint

    Ace Glass

    Straight connecting adapter, 4mm glass plug stopcock, 15mm O-Ring top joint and either a spherical joint or an inner standard taper joint on the bottom.

  • Adapters, Sanitary to Standard Taper, Glass Filled PTFE, Tri-Clamp

    Chemglass

    Standard taper inner joint to sanitary fitting adapter. Provides a convenient way to connect sanitary fittings and adapters to Chemglass reaction systems. Approximate overall length is 4&"; (102mm). NOTE: Clamp and Seals Must Be Purchased Separately.

  • Stopcock adapter, top outer joint, bottom inner joint, glass plug

    Ace Glass

    Stopcock adapter, top outer joint, bottom inner joint, glass plug. Spherical joint versions are both outer joints top and bottom.

  • Adapter, Angled Offset Adapter

    Ace Glass

    Angled offset adapter with outer joint on top and inner joint on bottom. For use with heads having 10 degree side necks, transitioning to 90 degrees.

  • Adapter, Rotary Evaporator Vial Adapter

    Ace Glass

    PTFE connecting adapters and glass conversion adapters for connecting GPI threaded vials to a rotary evaporator vapor tube or trap. Both are suitable for vacuum work. PTFE connecting adapters are available with FETFE or Chemraz o-rings. Order Chemraz if you are using Methylene Chloride or Acetone.…

  • Distilling Adapter

    Chemglass

    …O.D. glass distillate takeoff for use with PFA compression tubing fittings. Adapter has two top outer joints and a lower inner. Style “B” with lower angled joints are designed for use with flasks or reaction vessel lids that have a 10° or 20° angled side neck. Adapter has a…

  • PTFE Adapter

    Ace Glass

    PTFE adapter from one standard taper joint size to another.

  • Distilling/Splitting Adapter

    Chemglass

    Compact and simple distilling/splitter adapter for use with Chemglass process reactors. Vapor flows upward freely through the large vapors holes to the condenser. Distillate flow is directed using the valve to either the receiving flask or back to the reactor. Control valve is either a 0-4mm or a…

  • Distilling Adapter

    Chemglass

    Compact and simple distilling adapter for use with Chemglass process reactors. Vapor flows upward freely and distillate is collected in to the small bowl below the joint and through the stopcock into a distilling receiver. Adapter has a lower inner joint and is available with one or two top outer…

  • Luer Adapter

    DWK Life Sciences (Kimble)

    Adapter is available in most popular joint sizes and includes an integral vacuum connection. Adapter use a female luer for easy SPE cartridge or syringe connection. Size 1 hose connection takes 1/4” ID flexible vacuum tubing. Easy sample concentration and clean up with no glass frits…

  • Adapter Pipette Gls 5ml

    DWK Life Sciences (Wheaton)

    PVDF adapter fits pipette nozzle to accommodate standard glass Pasteur pipettes. FPM O-rings care for effective tightness.

  • Stainless Steel Tubular Adapter

    Sonics & Materials

    The adapter Part No. 830-00014 screws onto the special probe Part No. 630-0217 at the nodal point. The glass chamberslides onto the adapter and is secured in place as the bushing is screwed into the chamber compressing the O-ring. Movingthe glass chamber up or down on the adapter allows the portion…

  • Safe-Lab® Therm-O-Vac® Port Adapter

    Bel-Art - SP Scienceware

    Made from PTFE with Viton® O-ring on the body, screw cap and hose connection. Threads into Adapt-A-Port® body for use in standard taper glassware. NOT autoclavable. Accepts thermometer or straight glass tubing. Includes side mounted vacuum port

  • Filter Reactor, Bottom Adapter

    Ace Glass

    Bottom filter adapter for use with our 6384,6386 & 6388 glass reactor bodies and our 6390 all PTFE reactor bodies. Adapter differs from our codes 5838-83 & 5857-86 in that the 3/8in female NPT is located as a side discharge rather than thru the bottom. Adapters are PTFE and include a capfe o-ring,…

  • Filter Adapter Set, Neoprene

    United Scientific Supplies

    adapter cones designed to fit Buchnew and fritter glass funnels, porcelain filters without headpieces, and for reverse flow cleaning for filter crucibles. Adapters can be used to support funnels, Gooch crucibles, filter tubes and other apparatus in filtration assemblies These adapters are…

  • Adapter Valve No.15 O-Ring Joints

    Ace Glass

    Borosilicate glass valve adapter with various Hi-Vac valve sizes and (2) No.15 O-Ring joints. Ideal for assembling Schlenk or vacuum lines Comes with (2) size -116 FETFE O-Rings.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.