Glass Adapter

Vacuum adapters have 24/40 joints. Bent adapter has a 105° angle between the top outer joint and bottom inner joint. Straight adapter has a top outer joint and bottom inner joint. Both adapters have 24/40 joints and include a 3/8" hose connector.

Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.

Synthware vacuum adapter with 2mm straight bore glass stopcock on the hose connection.The upper outer and lower inner standard taper joints are the same size.

Synthware vacuum or inert gas adapter has a T-bore glass stopcock allowing vessels with a standard taper outer joint to purged and evacuated. The stopcock has a constant pressure retention device and a 4 mm bore.

Synthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.

Synthware vacuum adapter with a serrated hose connection 180 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.

Ai glass 3/8" hose barb tee adapter. Glass material: high borosilicate glass 3.3. Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function.

Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.

This nebulizer adapter plug 16/6 is used with standard glass cyclonic spray chambers (N0776052) in Optima 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments.

This kit includes: Glass Standard Cyclonic Spray Chamber (N0776052) Cyclonic Spray Chamber Mount Kit (N0770131) Cyclonic Spray Chamber Mount Nut (N0776005) Cyclonic Spray Chamber Mount Sleeve (N0776004) Cyclonic Spray Chamber Mount Ring (N0776003) 20 mm M4 Cap Screw (09919167) 6 mm M3 Cap…

Stopcock adapter featuring either a bent or straight hose connection and a glass or PTFE plug. See Ace 8223 for replacement glass plug and Ace 8224-04 for PTFE plug.

Synthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper outer joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.

Straight connecting adapter, 4mm glass plug stopcock, 15mm O-Ring top joint and either a spherical joint or an inner standard taper joint on the bottom.

Standard taper inner joint to sanitary fitting adapter. Provides a convenient way to connect sanitary fittings and adapters to Chemglass reaction systems. Approximate overall length is 4&"; (102mm). NOTE: Clamp and Seals Must Be Purchased Separately.

Stopcock adapter, top outer joint, bottom inner joint, glass plug. Spherical joint versions are both outer joints top and bottom.

Angled offset adapter with outer joint on top and inner joint on bottom. For use with heads having 10 degree side necks, transitioning to 90 degrees.

Synonyms: glass adapter; glass adapters Legal Information: Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

PTFE connecting adapters and glass conversion adapters for connecting GPI threaded vials to a rotary evaporator vapor tube or trap. Both are suitable for vacuum work. PTFE connecting adapters are available with FETFE or Chemraz o-rings. Order Chemraz if you are using Methylene Chloride or Acetone.…

…O.D. glass distillate takeoff for use with PFA compression tubing fittings. Adapter has two top outer joints and a lower inner. Style “B” with lower angled joints are designed for use with flasks or reaction vessel lids that have a 10° or 20° angled side neck. Adapter has a…

Synonyms: glass adapter; glass adapters Legal Information: Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

PTFE adapter from one standard taper joint size to another.

Compact and simple distilling/splitter adapter for use with Chemglass process reactors. Vapor flows upward freely through the large vapors holes to the condenser. Distillate flow is directed using the valve to either the receiving flask or back to the reactor. Control valve is either a 0-4mm or a…

… Adapter is available in most popular joint sizes and includes an integral vacuum connection. Adapter use a female luer for easy SPE cartridge or syringe connection. Size 1 hose connection takes 1/4” ID flexible vacuum tubing. Easy sample concentration and clean up with no glass frits…

Compact and simple distilling adapter for use with Chemglass process reactors. Vapor flows upward freely and distillate is collected in to the small bowl below the joint and through the stopcock into a distilling receiver. Adapter has a lower inner joint and is available with one or two top outer…

PVDF adapter fits pipette nozzle to accommodate standard glass Pasteur pipettes. FPM O-rings care for effective tightness.

The adapter Part No. 830-00014 screws onto the special probe Part No. 630-0217 at the nodal point. The glass chamberslides onto the adapter and is secured in place as the bushing is screwed into the chamber compressing the O-ring. Movingthe glass chamber up or down on the adapter allows the portion…

…of filter crucibles Adapters will withstand autoclaving Taper angle in all sizes 17°; wall thickness is 2.5 mm in sizes 1 and 2; 3 mm in sizes 3, 4 and 5; and 4 mm in size 6 Can be used singly or nesting adjacent sizes 4584T05 adapter set consists of one adapter of each size; fits orifices…

Made from PTFE with Viton® O-ring on the body, screw cap and hose connection. Threads into Adapt-A-Port® body for use in standard taper glassware. NOT autoclavable. Accepts thermometer or straight glass tubing. Includes side mounted vacuum port

Bottom filter adapter for use with our 6384,6386 & 6388 glass reactor bodies and our 6390 all PTFE reactor bodies. Adapter differs from our codes 5838-83 & 5857-86 in that the 3/8in female NPT is located as a side discharge rather than thru the bottom. Adapters are PTFE and include a capfe o-ring,…

…adapter cones designed to fit Buchnew and fritter glass funnels, porcelain filters without headpieces, and for reverse flow cleaning for filter crucibles. Adapters can be used to support funnels, Gooch crucibles, filter tubes and other apparatus in filtration assemblies These adapters are…

Borosilicate glass valve adapter with various Hi-Vac valve sizes and (2) No.15 O-Ring joints. Ideal for assembling Schlenk or vacuum lines Comes with (2) size -116 FETFE O-Rings.