Glas Col Shaker

Compare Tool

Select up to 3 products

Glas Col Shaker
1 - 29 of 29
Sort
View
Show
  • Versatile, user-friendly shakers that offer reciprocating shaking and mixing for many hours with bench top convenience. Variable speed motor controller - mixing action from gentle, low speed shaking to vigorous, high speed shaking Compact - can fit inside a fume hood for added safety …

  • 3d Floor Shaker

    Glas-Col

    …shakes large funnels Capacity is 80 lbs. The 3D floor shaker eliminates the time consuming and tiring manual shaking of large vessels. The 3D motion circulates liquids up, down, sideways and around making this shaker useful for hemolyzing blood, water pollution analysis or drug analysis.…

  • Holders for Large Separatory Funnels or Flasks From the upright or fill position, the funnel may be rotated to the 45° or 60° position for shaking and then returned to the upright position for the addition of materials or extracting. The flask may remain in the holder for the entire cycle.…

  • Power Drive Unit, Rotator For continuous rotation of accessory head at speeds of 2 to 60 rpm Variable speed control adjusts speed from gentle mixing to rapid agitation Suitable for rotating tissue culture specimens or blood cell suspensions without sedimentation or foaming …

  • Nutating Shakers

    Glas-Col

    The Nutating Shaker gives you the same convenient, consistent 3D shaking on your bench top as you get with our 3D Floor Shaker. Mechanically shakes glassware for consistent, repeatable results Fits in fume hood to protect personnel from fumes Handles total loads up to 40 lbs without…

  • Selectable settings Orbital offset is 0.070” Maximum capacity is 10 lbs Digital pulse mixer can perform high or low speed vortexing/mixing for a variety of applications. Unit can accommodate a wide range of glassware, racks, well plates or reactor blocks to produce accurate, repeatable…

  • Mixes multiple samples for better reproducibility Variable speed range: 100 to 2000 RPM Pulsing feature interrupts vortexing to join upper and lower strata for more thorough mixing DC motor with filter control for smoother operation and longer life Set speed and pulsing to identical time for…

  • Mini-Rotator

    Glas-Col

    Variable speed control Compact size Heavy duty Fuse protected Smaller size makes this ideal for use on a lab bench; in small incubations, refrigerators, biological cabinets and fume hoods; or in any other area where space is limited. Specifically designed to handle both large…

  • …and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it and get on with more important things without worrying about exploding glass. The Snorkel Stopper…

  • WS180 Shaker

    Glas-Col

    shaker simulates manual shaking by rotating through 180° of arc. It can shake two flasks simultaneously, either screw-cap top or side arm flasks. Its two large finger clamps securely hold glassware up to 3 1/2” in diameter and 10 long. Shakers shaft bearing design allows this versatile shaker

  • Takes from one to three separatory funnels size 60 to 250 mL Funnel stoppers are held in place by elastic bands. Three adjustable, rubber-covered yokes are used to secure funnels in holder. Spring- loaded release mechanism permits holder to be rotated about shank in 30° increments without…

  • …and can hold funnels as large as 500 ml. You can mount one or two of these holders on the shaker base. Just load the funnels with the stopcock down, adjust to the desired shaking position, and turn on the shaker. The funnel is secured by an easily adjusted yoke, and the stopper is held in place by a…

  • Larger-finger clamps are available for use with the Bench-Top Shaker. They can hold various types of glassware up to 2-1/4" (57 mm) in diameter. The clamps may also be adjusted to hold glassware at the most effective shaking angle. Sold individually. Part number R96 836 is a light duty clamp…

  • Shaker holder for 1000 mL Erlenmeyer flask. The Erlenmeyer flask holder will hold a single flask Mid-Range shaker holds up to four

  • Shaker holder for 500 mL Erlenmeyer flask. The Erlenmeyer flask holder will hold a single flask Mid-Range shaker holds up to four

  • This tube holder lets you use the Bench-Top Shaker for Mojonnier fat extraction. Each holder accepts up to four flasks, 37 mm in diameter.Maximum of two holders can be shaken at one time. The load max of up to five pounds (2.27 kg) need not be balanced. Unstoppered flasks may be shaken vertically.…

  • …and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it and get on with more important things without worrying about exploding glass. The Snorkel Stopper…

  • VentSep, a special 1000 mL separatory funnel with a built-in relief valve, can be used on Glas-Col's Bench-top Shaker or either of the Glas-Col 3D shakers. These separatory funnels feature a built-in relief valve Funnels have a fluoropolymer resin stopcock, and a screw cap with…

  • …can be shaken at once. A locking knob secures holder in optimum positions for both loading flasks and for effective shaking. While mounted on shaker, the holder can be rotated 180°. A combination of flasks is possible, as well. Made of coated aluminum Each holder adjusts to…

  • …and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it and get on with more important things without worrying about exploding glass. The Snorkel Stopper…

  • …and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it and get on with more important things without worrying about exploding glass. The Snorkel Stopper…

  • …and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it and get on with more important things without worrying about exploding glass. The Snorkel Stopper…

  • … Platform provides a horizontal surface for the easy attachment of a wide variety of vessels that need to be shaken. It is set on top of the shaker head and held securely with three hand-tightened locking knobs. Holders install quickly atop the platform through pre-located mounting holes. Two…

  • …only is the powder tossed from end-to-end, it is rotated around the inside of the vessel to produce a more thorough mixing action than reciprocal shakers. Unit features an adjustable rack that fits bottles from 7” to 10” in height and up to 7” in diameter. It has variable speed…

  • Takes one test tube rack containing capped or stoppered tubes from 75 to 200 mm long Use existing test tube racks up to 12" x 5" (305 x 127 mm) Rack is secured in holder by lid which fits over threaded end posts and is adjustable in height above support platform. Knurled nuts are used…

  • For use with 8293Q12 Power Drive Unit Circular aluminum rack that holds up to 108 mini tissue culture tubes, up to 16 mm in diameter Rack, 305 mm diameter

  • Touch Vortexer

    Glas-Col

    Shaker, adjustable speed, with pulsing feature For rapid mixing in tubes or other small vessels up to 38 mm diameter, which are hand-held in the resilient rubber agitator cup Provides vortexing action to swirl liquid in tube Pulsing feature can be engaged to collapse the vortex 48…

  • Scienceware® Vortex Accessory

    Bel-Art - SP Scienceware

    Micro-Tube Adapter For use with any vortexing machine having either a rubber pad or test tube cup Plastic attachment holds 1.5 mL microcentrifuge tubes in a disk mounted on a 165 mm (6 1/2") shaft Available in 8 or 20 tube capacity 

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.