Gl45 Bottle

…dispensing, pipetting Kimax® bottles have enhanced graduations and marking spot of permanent white enamel that will not fade or rub off. Blue polypropylene screw cap is autoclavable, universally interchangeable with all bottles in series. Bottles include clear pour ring for easy,…

An inexpensive bottle cap for either GL-45 or GPI-38 threads that permits standard solvent or media bottles to be used as an HPLC reservoir. Caps have two holes to accomodate 1/8" tubing and one hole that accepts a standard luer inner joint. Caps are made from polypropylene and the inserts are…

…a plastic coated graduated bottle, a standard cap assembly, and solvent and sparging filters. Cap assembly fits GL45 threaded bottles and has a PTFE bulkhead with three 1/4in- 28 threaded ports to accomodate fittings for 1/8in O.D. tubing. The quick disconnect bottle cap assembly, offered as an…

…polycarbonate bottles should not be used with bottle top filler units, or in other applications involving vacuum pressure as breaking may occur. Do Not tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. Note: Most GL45 threaded caps designed…

…system 3 combines a three-hole cap, solvent bottle adapter and a combination inlet/sparge filter to eliminate the safety hazards of aluminum foil wrapped solvent containers. Solvent bottle adapter converts GL-45 mobile phase caps to standard 4 L solvent bottles for direct connection to an HPLC pump.…

…round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles…

This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. Filtrate is collected directly into a media-type bottle when using a standard membrane filtration assembly  

…All caps are autoclavable. Connect 1/16" or 1/8" ID flexible tubing or 1/16” OD semi-rigid tubing to caps with Luer adapters. Plug any unused ports with a Luer plug to ensure a closed system. Bottle thread adapter converts bottles with S40 threads to accept any GL45 thread caps.

KimCote® plastic-coated bottle has enhanced graduations and marking spot is permanent white enamel. This general use bottle is provided with a wide opening (approx. 30 mm ID) GL 45 screw thread and is supplied with linerless autoclavable (121 ºC max) polypropylene blue cap. Bottle design includes a…

…assembly fits GL45 threaded bottles and has a PTFE bulkhead with three 1/4"- 28 threaded ports to accommodate fittings for PTFE 1/8" O.D. tubing.The unique PEEK bottom of the bottle inlet filter is designed to withdraw 99% of the HPLC mobile phase liquid out of the reservoir bottle without…

Bottle thread adapter converts bottles with S40 threads to be use with any GL45 thread caps.

Caps are designed to fit GL 45 threaded ware. Autoclavable Solid top polypropylene Cap colors available in blue, white, orange, gray, green, or pink High-temperature version with red cap available

…bottle allow easier and safer handling New cap design permits faster opening and closing. The caps are fully compatible with all standard “GL45” (45 mm neck size) Pyrex bottles Widely-spaced knurls (ridges and grooves) provide comfortable and ergonomic cap handling Narrow bottle…

Allow the use of the Hub-Cap Top with GL-45 solvent bottles.

…membrane, 1/4" OD x 1/8" ID ultra chemical resistant, FEP-lined Tygon tubing (3'), 6" x 6" box with shrink-wrap insert. Includes universal threads designed for 4 L or Wheaton bottles. Use with GL-45 bottles requires Opti-Cap adaptor (sold separately). Bottle not included.

…handling - The slim waist of the VITgrip™ lab bottles greatly improves handling. The molded volume graduations provide texture for an enhanced grip, especially when working with gloves. Leakproof* - The optimized sealing system of the bottle thread and screw cap form a reliable sealing…

…materials, amber media / solutions bottles are autoclavable, with permanent white imprinted graduations and marking spots. The supplied GL 45 cap is liner-less and both the cap and drip free ring are polypropylene and autoclavable to 140°C. Maximum use temperature of bottles is 450°C.

…as you thread the cap and eliminates the tubes from sliding in and out of the container. Each assembly comes with VersaCap® GL45 Cap and Manifold & Bottle Assy., Safety Inlet vale with filter, fittings for 4x 3.2mm (1/8") OD Tubing, 4x 1.6mm (1/16") OD Tubing & 4x Suitable…

…terephthalate (PET) storage bottles are easier to handle, require less space (13-20%) on the shelf and are ideal for mixing, sampling and storage. PET resin is lightweight, break-resistant and transparent as glass. Bottles use a linerless, one-piece autoclavable orange GL45 threaded polypropylene…

…storage bottles are designed as both heavy-duty storage and mixing and sampling bottles.  The extra wide mouth (69 mm inner diameter) gives easier access for pouring and removing pastes, powders and larger items. The neck opening is 5 times larger than on GL45 threaded bottles - much easier…

These borosilicate glass, general purpose media bottles are autoclavable with permanent white imprinted graduations and marking spots. The screw thread opening has an ID of approximately 30mm. The supplied cap is liner-less and both the cap and drip free ring are polypropylene autoclavable to 140…