Gel Red

SYPRO™ Red Protein Gel Stain is a fluorescent protein gel that detects as little at 4–8ng protein per band when soaked in a solution of 7.5% acetic acid for 40 to 60 minutes. It is five times more sensitive than the Coomassie™ stain, has low protein-to-protein variability, and is…

Storage: 2-8°C

Synonym(s): Anti-HA Storage: 2-8°C

MDL Number: MFCD03456743 Storage: −20°C

…Red color reduces risk of incidental aspiration. Improved recovery of target protein by reduced accidental loss. Higher reproducibility - More consistent yields General description: EZviewä Red Glutathione Affinity Gel is a highly visible, red colored glutathione agarose affinity gel.…

…. Increased visibility - Red color reduces risk of incidental aspiration. Improved recovery of target protein by reduced accidental loss. Higher reproducibility - More consistent yields General description: The EZ View Red Streptavidin Affinity gel is composed of streptavidin,…

…- Red color reduces risk of incidental aspiration. Improved recovery of target protein by reduced accidental loss. Higher reproducibility - More consistent yields General description: EZ view Red Protein A Affinity Gel is Protein A covalently bonded to 4% Agarose beads. The affinity gel…

…aspiration of the resin leads to quantitative variability in results. The EZview(TM) Red Affinity Gels greatly reduces the risk of pellet loss. EZview resins perform as well as conventional non-colored affinity gels, but allow the user to easily differentiate pellet from supernatant. This correlates…

…full credit or replacement antibody. Learn more. General description: EZ view Red Anti-FLAG M2 Affinity Gel is a resin that consists of Anti-FLAG M2 antibody, covalently bonded to 4% Agarose beads. The affinity gel is used to bind FLAG fusion proteins to samples, such as cell lysates and tissue,…

Multi-purpose monitoring electrodes with foam backing and sticky gel are ideally suited for the OR, ER and diagnostic stress testing applications. Conveniently packaged in individual strips of ten electrodes for easy use and less waste. Remains fresh for 30 days out of the bag.

Product description: VACUETTE® TUBE 7 ml CAT Serum Separator Clot Activator 16x100 red cap-yellow ring, non-ridged, double gel, USA Sterility: sterile Inner pack (pcs.): 50 Sales unit (pcs.): 1200

…components. Addition of collagen type IV to the ECM gel increases polymerization. The growth factor reduction modification allows for more control of medium, better interpretation of results and increased polymerization. The medium also lacks phenol red, which can interfere with some analyses. …

…red dye that permits easy visualization and direct loading onto a gel. There is no need to add loading buffer as the mix is of sufficiently high density to sink to the bottom of the gel. The red dye migrates like a 350 bp fragment on a 2% agarose TAE gel (or 600 bp on a 1% agarose). BioMix Red…

…Axygen Gel Documentation Systems Axygen Gel Documentation System is an ideal system for labs that want good value without compromising ease of use or image quality. It includes a dual-wavelength transilluminator, 5.4 MP image resolution camera, and image acquisition software. Axygen Gel…

…inert red dye. This non-toxic, non-hazardous red dye allows users to load samples directly onto a gel, without the need to add loading buffer since the mix is of sufficiently high density to sink to the bottom of the gel. Adequate mixing is also ensured when reactions are set up. The red dye…

…cell walls of the red algae. They are anionic linear polymers composed of 1,3a-1,4ß-galactans having one (?-), two (?-) or three (?-) sulfates per disaccharide unit. In ionic solutions, ?- and ?-carrageenans self-associate into helical structures that form rigid or flexible gels, respectively.…

…non-specific amplification. ExtremeTaq HiFi Red Mix is also available with an inert red gel loading and tracking dye allowing samples to be loaded directly in agarose gel wells without separate gel loading buffers. ExtremeTaq HiFi Red Mix contains an inert red gel-loading and tracking dye which…

…safe fluorescent nucleic acid dye designed to replace the highly toxic ethidium bromide (EB) for staining dsDNA, ssDNA or RNA in agarose gels or polyacrylamide gels. GelRed® is far more sensitive than EB without requiring a destaining step. GelRed® and EB have virtually the same spectra, so…

GelGreen® is a sensitive, stable and environmentally safe green fluorescent nucleic acid dye designed to stain either dsDNA, ssDNA or RNA in agarose gels. GelGreen® is far more sensitive than SYBR Safe. We continue to offer GelGreen® 10,000X solution in DMSO for established users who…

…standard and fast PCR conditions (10-30s/kb) High temperature cycling for reduced GC bias Available as a convenient 2x ready mix with red dye for direct gel loading Generates blunt-end PCR products Applications High fidelity PCR Long range PCR Site-directed mutagenesis Cloning Sequencing

…standard and fast PCR conditions (10-30s/kb) High temperature cycling for reduced GC bias Generates blunt-end PCR products Available as a convenient 2x ready mix with red dye for direct gel loading Applications High fidelity PCR Long range PCR Site-directed mutagenesis Cloning Sequencing

For new users, we recommend GelGreen® 10,000X in water, our latest formulation that eliminates the hazards of handling DMSO for better safety. Replaces SYBR or GelStar. Excites at 488nm.

…PCR. MyTaq HS Red Mix, includes a 5x MyTaq Red Reaction Buffer that increases the visual contrast between the reagent and the reaction vessel for improved convenience and to improve pipetting accuracy. The red dye also enables samples to be loaded directly on to a gel after the PCR eliminating…

…and assay reproducibility. MyTaq Red Mix contains a red dye that increases the visual contrast between the reagent and the reaction vessel for improved convenience and to improve pipetting accuracy. The red dye also enables samples to be loaded directly on to a gel after the PCR without the need to…

…enzyme is supplied with a 5x MyTaq Red Reaction Buffer that increases the visual contrast between the reagent and the reaction vessel for improved convenience and to improve pipetting accuracy. The red dye also enables samples to be loaded directly on to a gel after the PCR without the need to add…

…ready-to-use mix contains an inert red dye and high-density additive which allows samples to be loaded directly in agarose gels without additional gel loading or tracking dyes. The red dye migrates at the rate of 600 bp and 350 bp DNA in a 1% and 2% TAE agarose gels respectively. Supplied w/New…

Similar with BIO-37111, but including a red dye which enables users to load samples directly onto a gel after the PCR without the need to add loading buffer. The specially designed red dye does not interfere with the PCR reaction. Meridian Life Sciences, Inc. products are intended for…

… MyTaq HS Red DNA Polymerase includes a 5x MyTaq Red Reaction Buffer that increases the visual contrast between the reagent and the reaction vessel for improved convenience and to improve pipetting accuracy. The red dye also enables samples to be loaded directly on to a gel after the PCR…

Agar is a polysaccharide complex extracted by bleaching and hot water treatment of agarocytes from the red alga Rhodophyceae, and usually consisting of the genera Gelidium, Acanthopeltis, Ceramium,Pterocladia and Gracilaria. The algae are typically found in the Pacific and Indian Oceans and in the…

…ready-to-use mix contains an inert red dye and high-density additive which allows samples to be loaded directly in agarose gels without additional gel loading or tracking dyes. The red dye migrates at the rate of 600 bp and 350 bp DNA in a 1% and 2% TAE agarose gels respectively. Supplied w/New…

RFP Control is suitable as a control for polyclonal or monoclonal Anti-RFP in immunological assays. The molecular weight of RFP (calculated) is 27 kDa, but in a gel it is expected to run at approximately 28-30 kDa.

A round-style monitoring electrode with soft cloth backing for general ECG monitoring. Patented solid gel penetrates the skin quickly allowing high quality. Low chloride content minimizes skin irritation.