Gc Vial Caps

Compare Tool

Select up to 3 products

Gc Vial Caps
1 - 32 of 61
Sort
View
Show
  • LC Certified Vial Kits

    J.G. Finneran

    GC Test – Volatile Residue LC Certified Vials are available with or without graduated marking spots. You may choose from bonded PTFE/Silicone or bonded PTFE/Silicone with slit septa. Our sealed and re-closeable container includes: 100 - Certified 2.0mL screw thread vials

  • Screw Top Autosampler Vial Convenience Kit

    PerkinElmer

    Vial: Size: 12 x 30 mm Volume: 2 mL I.D.: 8 mm Finish: Screw Top Description: Clear glass vial PTFE septa with black cap Cap: 8: 425 Screw Thread Color: Black Septa: PTFE/Silicone This cap will fit all industry standard 12x30 or 12x32 screw top vials

  • 11mm Snap Top Caps™

    J.G. Finneran

    …Snap Ring™ or Snap Seal™ vials Snap on and off easily No sharp aluminum edges 2686S94 through 2686T10 are Polypropylene GC Snap Top Caps. 2686T21 through T42 Snap Top Caps are for Shimadzu Autosamplers. All caps are 11 mm. Caps may be snapped on and off by hand…

  • µLplate® Snap Caps

    MicroLiter

    …of 96-well microplates for chromatography, the Plate Sampling System™ uses closures familiar to those who work with standard chromatography vials. Polypropylene μLplates™ have a variety of closures that will stabilize the sample during the analytical sample run and, if necessary,…

  • 2 mL, 11 mm Crimp Top Vial with PTFE/Silicone Closure- Kit

    PerkinElmer

    Volume: 2 mL Size: 12 x 32 mm I.D.: 11 mm Finish: Crimp Top Cap with Closure Kit Description: Clear glass PTFE/Silicone septa with aluminum cap

  • Mass Spec Certified Vial Kits

    J.G. Finneran

    …Size, Particle/mL/Vial Mass Spec Vials are available with or without graduated marking spots. You may choose from bonded PTFE/Silicone or bonded PTFE/Silicone with slit septa. Our sealed and re-closeable container includes: 100 - Certified 2.0mL screw thread vials 100 - 9mm royal blue closures with…

  • Headspace 20mm Crimp Seals with Septa

    National Scientific

    20mm Crimp seals with prefitted septa for headspace vials Seals with pre-inserted septa are convenient and minimize contamination due to handling Use magnetic seals with CTC/Leap* Technologies, Gerstel* and other magnetic transport autosamplers PurePak* PTFE/Silicone seals are packed…

  • Combi PAL and GC PAL Liquid Injection Vials and Caps

    Agilent Technologies

    Agilent provides a wide variety of micro and 2 ml vials and caps compatible with the Combi Pal and GC Pal listed in the Vials and Caps section. Below are the most popular vials and caps.

  • Automatic Liquid Sampler Supplies

    Agilent Technologies

    Basic Supply Kit (2713N15) contains 10 ml syringes (6/ea), 23/26 gauge needles, 4 ml vials with diffusion caps (144/pk), 2 ml automatic sampler vials with screw caps (1,000/pk), GC septa (25/pk), and vial racks (5/pk).Basic Supply Kit Contains 10 ml syringes

  • Supplies For G1883A, G1888A and 7694 Headspace Units

    Agilent Technologies

    …Top Glass Vials Headspace Vials for G1888A Autosampler Beveled top for maximum secure seal Two neck lengths are available Flat or rounded bottom designs Beveled neck vials are available in both 10 mL and 20 mL capacities, flat or rounded bottom. The 20 mm crimp caps provide…

  • Target DP Vial System

    National Scientific

    …of a screw cap vial with the integrity of a crimp vial, I-D™ vials have write-on patches graduated at 0.5, 1.0 and 1.5 ml. Also compatible with Perkin-Elmer, Shimadzu and Varian GC and LC autosamplers and Waters, Hitachi and Beckman LC autosamplers. Silanized vials have been treated…

  • 4 mL Screw Top Vials, Caps and Septa Kits

    Agilent Technologies

  • 2.0 mL, 11 mm GC Snap Ring Caps with Septum

    Restek

    Snaps on any crimp-style vial Save money! Use this snap cap when you don’t need to crimp

  • Cap for waste and wash vial (single cap)

    PerkinElmer

    Black Phenolic Cap (no septa) for waste and wash function for GC. Use with wash vial, part number 09923031.

  • Polypropylene Snap Cap Vials

    MicroLiter

    MicroLiter offers products for both LC and GC applications.

  • Specialty Autosampler Vials And Accessories

    J.G. Finneran

    …Phillips S4, S8 and 4700LC/GC; Pye S8; S.G.E. LS-3200; and Unicam 4700GC, 4700LC and S4/S8. Used with A.I. 60 Vial Tray; Carlo Erba / Fisons 60 Vial Tray; Dynatech 60 Vial Tray; Fisons 60 Vial Tray; LDC 713; Perkin Elmer LC 600 (60), AS 100/B, 300, 8300, AI - 1, AS2000, LC30, 2000 and B2000; and…

  • Bench Top Vial Crimper Jaws for 20mm Vials

    PerkinElmer

    Requires but does not include Bench Top Vial Crimper p/n N6621006. For use on GC Headspace Vials or LC Large Volume Vials. Crimp capping is still a preferred method by some laboratories to ensure sample integrity, particularly those containing volatile compounds.

  • Cap Removal Tool for 20mm Vials

    PerkinElmer

    Cap Removal Tool for 20mm Vials

  • 2 mL, 9 mm, Screw Top Vial with PTFE/Silicone Pre-slit Gray Cap Closure-Kit

    PerkinElmer

    …and compatibility, our convenience kits are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Volume: 2 mL Size: 12 x 32 mm I.D.: 9 mm (certified) Finish: Screw Top Cap with Closure Kit Description: Clear glass vial PTFE/Silicone Pre-slit septa with gray cap

  • Crimp Neck Vial Kits, N 11

    MACHEREY-NAGEL

    11 mm crimp neck vials and caps commonly used in GC and HPLC and suitable for almost all autosamplers Magnetic crimp closures available for CTC GC PAL or equivalent autosamplers. Vial Kits contain 100 Vials and 100 closures in a drawer-like box which is stackable, chemically resistant and…

  • 11mm Snap Cap Vials, 12x32mm

    MicroLiter

    MicroLiter offers products for both LC and GC applications.

  • 2 mL, 9 mm, Screw Top Vial with PTFE/Silicone Closure-Kit

    PerkinElmer

    Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Screw Top Vials and 100 preassembled Blue Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack. Guaranteed for fit and compatibility, our…

  • Polypropylene Screw Caps, Black, for the AutoSystem, AutoSystem XL GC and Clarus…

    PerkinElmer

    Polypropylene Screw Caps, Black, for the AutoSystem, AutoSystem XL GC and Clarus 500 GC: Package: 100

  • Headspace Vials

    Agilent Technologies

    …Top Glass Vials Headspace Vials for G1888A Autosampler Beveled top for maximum secure seal Two neck lengths are available Flat or rounded bottom designs Beveled neck vials are available in both 10 mL and 20 mL capacities, flat or rounded bottom. The 20 mm crimp caps provide…

  • EPA Vials

    MilliporeSigma

    … 6. Cap the containers. After being cleaned these vials are assembled with the following materials: Type 1 borosilicate glass, PTFE/silicone septa, and a polypropylene cap. The vials are available in either clear or amber glass. All of the vials are packaged with an open top cap and a…

  • 2 mL, 10 mm, Screw Top Amber Vial with PTFE/Silicone Pre-slit Closure Kit

    PerkinElmer

    …Top Vials and 100 preassembled Black Caps with PTFE/Silicone Pre-slit Septa together in an environmentally clean, re-sealable clamshell pack. Volume: 2 mL Size: 12 x 32 mm I.D.: 10 mm Finish: Screw Top with Closure Kit Description: Amber glass vial PTFE/Silicone Pre-slit Septa with Black Cap

  • 2 mL, 10 mm, Screw Top Vial with PTFE/Silicone Pre-slit Closure Kit

    PerkinElmer

    …Top Vials and 100 preassembled Black Caps with PTFE/Silicone Pre-slit Septa together in an environmentally clean, re-sealable clamshell pack. Volume: 2 mL Size: 12 x 32 mm I.D.: 10 mm Finish: Screw Top with Closure Kit Description:Clear glass vial PTFE/Silicone Pre-slit Septa with Black Cap

  • 2 mL, 9 mm, Screw Top Vial with PTFE/Silicone Pre-slit Closure-Kit

    PerkinElmer

    Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Screw Top Vials and 100 preassembled Blue Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack. Guaranteed for fit and compatibility, our…

  • 4 mL, Waste and Wash Screw Top Vial with Write-On Patch and Level Lines

    PerkinElmer

    …resistant to acidic, neutral and alkali solutions. In addition, all our vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Combine our vials with our Exclusive pressure relief caps/septa to ensure safe analysis at…

  • 2 mL, 9 mm, Screw Top Vial with PTFE/Silicone Pre-slit Closure-Kit

    PerkinElmer

    …for fit and compatibility, our convenience kits are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Volume: 2 mL Size: 12 x 32 mm I. D. : 9 mm Finish: Screw Top Cap with Closure Kit Description: Clear glass vial PTFE/Silicone Pre-slit septa with blue cap

  • 2 mL, 9 mm, Screw Top Amber Vial with PTFE/Silicone Pre-slit Closure-Kit

    PerkinElmer

    …compatibility, our convenience kits are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. Volume: 2 mL Size: 12 x 32 mm I. D. : 9 mm  Finish: Screw Top Cap with Closure Kit Description: Amber Polyethelene glass vial PTFE/Silicone Pre-slit septa with blue cap

  • 2 mL, 9 mm, Screw Top Vial with PTFE/Red Rubber Closure-Kit

    PerkinElmer

    Available with either glass or polypropylene vials and a range of cap choices, these autosampler vial, cap and septa kits make it surprising simple to re-stock your laboratory. For your added convenience, the most popular kits are also available in 1000 pack size.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.