Fume Hood Shelf

TrippNT's 36-Inch Fume Hood Shelf holds supplies used in the hood or contamination box. Laminar flow is free to pull and keeps hood safe. The White PVC is lightweight and easy to wash and clean.

TrippNT's Fume Hood Shelf holds supplies used in the hood or contamination box. Laminar flow is free to pull and keeps hood safe. The White PVC is lightweight and easy to wash and clean.

Base cabinets built to last! UniLine Fume Hood Base Cabinets are constructed of top grade furniture steel and finished in a chemical resistant powder coated finish meeting or exceeding SEFA 8 recommended practice for laboratory casework. UniLine Base Cabinets set the standard for safety and…

…Filtered Fume Hoods HEPA Filter, 99.995% efficient, H14 type. 1 EA. Replacement Standard Roughing Prefilter for Protector Filtered Fume Hoods Replacement roughing prefilter, located in light box. 1 EA. Replacement Acid Roughing Prefilter for Protector Filtered Fume Hoods …

…and environment from toxic vapors, gases, fumes, and particulate. The AC600 Series ductless chemical workstation features the use of molded thermoplastics configured for a variety of common applications. Smaller in size, it makes an excellent portable fume hood for the classroom or laboratory. …

…functionality Provides full access to change anything on the settings of the hood Required to operate/maintain and change settings on the fume hood Must have other type of card for other functionality *1 of each card type (user, administrator, maintenance) included with each hood

Protector Acid Storage Cabinets support all Labconco benchtop fume hoods and safely store and vent acids and other corrosive liquids. Features: two rear vent connection cutouts for venting the cabinet into a fume hood; durable epoxy-coated steel construction; corrosion-resistant polyethylene-lined…

…feet allow users to make adjustments to level the cabinet based on the condition of their floors. Interior shelf kit for Protector standard storage cabinet includes epoxy-coated steel shelf and mounting hardware. Kits are available for 30”, 36” and 48” models. Labconco…

… Exhaust Connection Kit Allows the Fuming System to exhaust to a remote location, such as out a window or into a nearby fume hood. Includes 10' long, 4" diameter collapsible duct. Shipping weight 1 lb. (0.5 kg). Stainless Steel Shelf Allows evidence to be supported in the…

Stainless steel Mounts to rear grille and provides 8.0" x 5.0" (20 x 13 cm) surface to place supplies Weight capacity: 2.2 lbs. (1 kg), shipping weight 3 lbs. (1 kg)

…(2.3 kg). Exhaust Connection Kit Allows the Fuming System to exhaust to a remote location, such as out a window or into a nearby fume hood. Includes 10' long, 4" diameter collapsible duct. Shipping weight 1 lb. (0.5 kg). Stainless Steel Shelf Allows evidence to be supported in the clear…

…work surface to support remote equipment within easy access of the biosafety cabinet Epoxy-coated steel shelf mounts to left-side tubular frame of base stand Includes epoxy-coated steel shelf and fasteners. Installation is required Not for use with SoLo Hydraulic Lift Base Stand.

…with 1.5" air gap; glacier white exterior that complements laboratory casework and Labconco fume hoods; manual-closing door(s) with 3-position locking handle. Includes epoxy-coated steel shelf, four leveling feet and one 8" filler panel to increase cabinet depth from 22" to 30".…

Compact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters to…

Base Stand, (Metal), Open Frame, Mobile, with Locking Casters, Lower Shelf, Fixed height, 28" Deep.

Glacier white, epoxy-coated, 16 gauge steel Designed to hook on the lower rear horizontal cross member of the Telescoping Base Stand Provides storage space for wipes, cleaning agents, gloves and other miscellaneous laboratory supplies

…mounts between two Stations for a secure fi t and continuous work surface. Features Open-sided, open-top design Epoxy-coated steel housing and shelf Type 304 stainless steel work surface with Flow-Zone perforations Removable powder catch pan Built-in blower with motorized, backward curved…

…DFO. Ninhydrin should always be used in fume hood or with an appropriate filter mask. Very economical Can also be mixed with 3M™ Novec™ Engineered Fluid HFE-7100 for a less toxic and non-flammable solution Crystals have an 2 year shelf life Working solution is one year

…to metal surface such as file cabinets, fume hoods, refrigerators, and freezers. Angled shelves store 0.1 to 50 mL pipettes within arm's reach for use. Protective lid encloses the unit to prevent dust build up. The lid also provides an additional shelf for needed space when connected horizontally.…

…that complements laboratory casework and Labconco fume hoods; self-closing door(s) with 3-position locking handle. Door(s) close automatically in case of fire when temperature reaches 74° C (164° F). Includes epoxy-coated steel shelf, four leveling feet and one 8" filler panel to…