Fume Hood Cabinet

Compare Tool

Select up to 3 products

Fume Hood Cabinet
1 - 32 of 210
Sort
View
Show
  • Mini-Hoods

    Terra Universal

    …It can easily be modified to allow exhaust fume venting. Standard size: 20"W x 12"H x 16"D (508 mm x 305 mm x 406 mm). Easily placed over small process equipment, beakers, flasks and other materials to protect against spills and fumes Prevents drafts from affecting delicate…

  • UniLine Fume Hood Base Cabinets

    Hemco

    Base cabinets built to last! UniLine Fume Hood Base Cabinets are constructed of top grade furniture steel and finished in a chemical resistant powder coated finish meeting or exceeding SEFA 8 recommended practice for laboratory casework. UniLine Base Cabinets set the standard for safety and…

  • Protector® Premier® Laboratory Hoods

    Labconco

    …of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer life. Like the Protector XStream Hoods, Protector Premier Hoods

  • 6' Protector Echo Filtered Fume Hoods

    Labconco

    …traditional hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 6' Echo Fume Hood

  • 8' Protector Echo Filtered Fume Hoods

    Labconco

    …traditional hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 8' Echo Fume Hood

  • UniFlow LE AireStream Laboratory Fume Hoods

    Hemco

    …through the fume chamber. The Vector baffle system directs the air through the fume chamber to the bell shaped exhaust collar with minimum turbulence. The fume hood has a non-metallic construction (NO RUST) for total chemical resistance, superior durability and long life. Fume hood is U.L.1805…

  • 4' Protector Echo Filtered Fume Hoods

    Labconco

    hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 4' Echo Fume Hood

  • 5' Protector Echo Filtered Fume Hoods

    Labconco

    hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 5' Echo Fume Hood requires a…

  • Isolator³ Bench Top Fume Hoods

    INSTOCK Labs

    Isolator 3 Bench Top Fume Hood is a safe and superior operating environment without the need for additional components to add or inject air into the hood chamber. By controlling baffle pressurization, Isolator 3 achieves the proper capture and containment at a 60 FPM face velocity. Additionall, we…

  • Protector XL Floor-Mounted Fume Hoods

    Labconco

    …and 48” Rear Finish Panel Kits Glacier white powder-coated steel panel hides hood's interior components on the rear to provide finished appearance. Recommended when hood is mounted on a casework island w/ back exposed. Adds 1.5" to overall depth of Floor-Mount hoods.

  • Techni-Dome® 360 Fume Hood

    Bel-Art Products

    The Techni-Dome® Fume Hood has a 50cm (20") ID and 45cm (18") height, making it ideal for simple micropipetting processes, blending of chemicals, handling of small biohazard items or interactive museum/educational displays. Compact; fits on crowded benchtops Clear,…

  • Under-the-Counter Combination Acid/Flammables Cabinets

    SciMatCo

    Cabinet Floor constructed as a 2” liquid tight trough Cabinet supplied with internal metal lock on the Flammable side and a plastic hasp and padlock on the Corrosive side Cabinets designed to support Standard Laboratory Fume Hoods (not supplied with work surface) All cabinets

  • Clean Aire II Ductless Fume Hoods

    Hemco

    Clean Aire II Fume Hoods are a Class 1 ductless hood workstation with activated Carbon Filtration for fumes, odors, non-hazardous chemical vapors. This is a self contained ductless hood unit, equipped with integral carbon filter, vapor proof light, vertical sash and controls, and completely molded…

  • Universal Fume Hoods

    Hemco

    The Universal Fume Hood is designed for light to medium duty fume removal, and offers such features as a sturdy dual wall construction, and a fully vertical sliding sash. It is completely molded of fire retardant fiberglass. Thomas Numbers 1167M01-M04: Units do not have a blower and require a…

  • Fittings for INSTOCK Fume Hoods

    INSTOCK Labs

    …brass nylon color-coded panel flange with angle serrated hose connector, a remost control rod assembly with a plastic flange and a tank nipple, locknut and washer. Fittings may be used on either side of hood. Shipped loose and installed in field. 2017 INSTOCK Laboratory Furnishings Catalog

  • Scienceware Clear View Fume Hood

    Bel-Art Products

    Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions 6" OD vent…

  • Fume Hood Work Surfaces

    INSTOCK Labs

    Modified black epoxy resin work surfaces are dished to retain spills. They are available with or without drop in cup sink cutouts. 2017 INSTOCK Laboratory Furnishings Catalog

  • Sciencware® Tapered Rear Exhaust Fume Hoods

    Bel-Art Products

    …and Vats These polypropylene exhaust hoods are intended to rest on the rear edge of a tank and draw a stream of air across the top of the tank, away from the operator. An exhaust system is required. Formula for calculating required airflow for hood: 1.833 x 150 = 274.95 CFM. Service temperature…

  • Fume Hood Alarm

    INSTOCK Labs

    Each fume hood is fully pre-punched, for the fast and easy installation of this alarm. The TEL AFA-1000 provides a digital readout of the fume hood face velocity and sounds an alarm when the airflow falls below safe levels. Consisting of a thermostat sensor (mounted through the side wall of the fume

  • Fume Hood Fans

    INSTOCK Labs

    The GES Series Compact Sirocco Fan is made of an injected FRPP mold with standardized central discharge. The impeller and casing are both made of an injected FRPP mold for enhanced recycleability. All units standardly feature: Belt driven forward inclined impellers Carbon steel drive…

  • Fume Hood Exhaust Blowers

    Hemco

    Epoxy coated steel, belt drive, exhaust blowers for canopy hoods based on duct runs under 25ft and no more than 4 elbows. These exhaust blowers are designed to maintain between 80 to 100FPM.

  • Protector Fume Hood Accessories

    Labconco

    Screen mounts behind the baffles for trapping tissue wipers & other papers. Each kit includes mounting hardware, powder-coated stainless steel screen & instructions. Contact Labconco for screens for hoods wider than 8'.

  • Scienceware Clear View Fume Hood

    Bel-Art Products

    Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions One 6” OD vent…

  • Scienceware® Large Molded Fume Hood

    Bel-Art Products

    This fume hood features a one-piece shell molded of polyethylene plastic with a clear acrylic sash that slides on inside tracks. Sash can be set in an open, closed or intermediate position; remains open slightly when in closed position to facilitate continuous air flow Front opening is 88…

  • Adjustable Height Fume Hood Ceilling Enclosures

    INSTOCK Labs

    These three sided ceiling enclosures are designed to fill the space between the top of the hood and the ceiling up to 24" in height to provide a clean finished appearance. The enclosure is cut to fit in the field and includes a slip to fit ceiling finish trim angle. 2017 INSTOCK…

  • Scienceware® Large Molded Fume Hood with Baffle

    Bel-Art Products

    This fume hood features a one-piece shell molded of polyethylene plastic with a flat internal baffle and a clear acrylic sash that slides on inside tracks. Internal baffle across the rear of the shell slopes forward, leaving space beneath for air flow to sweep the deck, and space above in…

  • Fume Hood Electrical Receptacle Mounting Kits

    Labconco

    …Steel Laboratory Hood. Includes electrical receptacle, wiring, junction box and receptacle cover plate. International GFCI Switch for 3', 4', 5', 6', 7' or 8' Protector Premier, Xstream, XL, PVC Perchloric Acid or Stainless Steel Laboratory Hood. Mountable in one corner…

  • Fume Adsorbers

    Labconco

    Traps solvent vapors Fume Adsorber is designed for histology cover slipping and staining areas and uses activated carbon media to adsorb annoying odors and noxious vapors such as xylene and toluene. Solvent vapors are trapped in the capillary-like channels of the carbon filter while clean air is…

  • Isolator Gen-5 Walk-In Fume Hoods

    INSTOCK Labs

    The Isolator Gen-5 bypass walk-in fume hood with the frameless vertical sash is similar to the bench style unit in design and function. The top view-pass is clear tempered glass. These units are normally used with tall equipment setups where maximum clarity of vision is a priority. When floor…

  • Protector® Airo™ Filtered Fume Hoods

    Labconco

    …Filtered Fume Hood. Labconco has combined its patented* fully-featured, containment- enhancing Protector® Hood design with Erlab’s GreenFumeHood® (GFH) Filtration Technology to deliver a multi-use fume hood that requires no ducting. The Protector Airo Filtered Fume Hood delivers…

  • Protector ClassMate Laboratory Fume Hoods

    Labconco

    … SEFA 1-2002 (Laboratory Fume Hoods) ASHRAE 110-95 (Method of Testing Performance of Laboratory Fume Hoods) ANSI Z9.5-1993 (Laboratory Ventilation) UL 3101-1/61010-1 CAN/CSA C22.2 No. 1010.1 Required Accessories Base cabinets Adjustable Height Base stands …

  • Captair Smart Ductless Fume Hoods

    Erlab

    Simpler to use, Safer to operate Erlab’s Captair Smart ductless fume hoods are designed with advanced carbon filtration, Flex Technology and a simple, innovative way to keep you safe. With Erlab’s unique validation process, safety is guaranteed and chemical exposure is eliminated…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.