Fume Hood Blower

Compare Tool

Select up to 3 products

Fume Hood Blower
1 - 32 of 60
Sort
View
Show

Attention Thomas Scientific Customers

Due to the current pandemic, lead times for PPE items are longer than what is listed on our website. Please expect shipping delays of all PPE products during this time.

  • Epoxy coated steel, belt drive, exhaust blowers for canopy hoods based on duct runs under 25ft and no more than 4 elbows. These exhaust blowers are designed to maintain between 80 to 100FPM.

  • Phenolic-coated impeller and housing Dry powder epoxy-coated steel base and removable weather cover Belt-drive motor with adjustable sheave and self-adjusting gravity belt tightener

  • …ordering info below). Requires work surface, base cabinet or stand, ductwork and remote blower (except for Hoods with Blower Modules). Basic 47 Hoods can be used as an individual work stations. Hoods with blower module are capable of overcoming a maximum external static pressure of .25"…

  • The fume hood can be connected to an in-house laboratory exhaust system or used with the SPB blower unit (N9308022). Fume hoods come flat packed to save transport costs and can be assembled in minutes without tools.

  • PVC Blowers

    Labconco

    PVC Blower, made specifically to handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid. Features: Vacuum formed housing of unplasticized Type I polyvinyl chloride for complete corrosion protection; inlet and discharge diameters are sized to receive rigid PVC…

  • The Protector XStream I-S Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream I-S easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than 0.05 ppm leak rate…

  • …life. Designed for use with Labconco’s Intelli-Sense Multi-Speed Blowers, Protector Premier I-S Hoods feature integrated sash position blower controls. As the sash is raised or lowered, sensors alert the blower to change speeds to maintain a safe face velocity. That face velocity is…

  • …Intelli-Sense Blowers take much of the guesswork out of blower selection. Since they are adjustable over a broad airflow range, they may be used to exhaust fume hoods from 3' to 7' in width at full sash open height and 100 fpm face velocity. The blowers may also be used with hoods from…

  • …Intelli-Sense Blowers take much of the guesswork out of blower selection. Since they are adjustable over a broad airflow range, they may be used to exhaust fume hoods from 3' to 7' in width at full sash open height and 100 fpm face velocity. The blowers may also be used with hoods from…

  • …explosion-proof blowers are designed for fume hood exhaust systems in moderate to highly corrosive conditions and have non-sparking polypropylene impellers and explosion-proof motors. Housing is molded fiberglass-reinforced polyester for durability and long life. Both blowers have a dry powder…

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • The Universal Fume Hood is designed for light to medium duty fume removal, and offers such features as a sturdy dual wall construction, and a fully vertical sliding sash. It is completely molded of fire retardant fiberglass. Thomas Numbers 1167M01-M04: Units do not have a blower and require a…

  • …Intelli-Sense Blowers take much of the guesswork out of blower selection. Since they are adjustable over a broad airflow range, they may be used to exhaust fume hoods from 3' to 7' in width at full sash open height and 100 fpm face velocity. The blowers may also be used with hoods from…

  • …30 Laboratory Hoods are suitable for general chemistry applications. Explosion-proof models are available for applications involving high concentrations of flammable solvents. Choose from hoods designed to be used with a remotely-located blower or hoods that include a built-in blower. Features…

  • Fume Adsorbers

    Labconco

    …level. Blower and carbon filter are housed in an epoxy-coated steel cell, which is louvered in front for efficient air flow. Enclosure is clear, one-piece shatter-resistant acrylic, 3/8” thick. Unit comes complete with wiring, switch, an 8-foot, three-wire cord and plug. The Fume Adsorber-2…

  • …side wall of the fume hood) and a monitor (mounted on the fascia), the unit gives both a visual and audible alarm. The monitor also contains test/reset button allowing the user to verify alarm readiness. The monitor is shipped loose for field installation. The Fan Blower Switch is a manual…

  • …the Protector Premier Hood meets the SEFA-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm. These hoods are offered for use with a remotely-located blower or with a built-in blower — the only high performance hood with built-in blower available anywhere. …

  • The newly redesigned, patented* Protector XStream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than…

  • Epoxy-coated Steel Blower Transition Adaptors allow you to connect thermoplastic duct to the exhaust side of a blower to create an exhaust stack. Nominal size PVC duct fits inside the adaptor opening.

  • The Protector XL Benchtop Laboratory Hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features …

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • …(Laboratory Fume Hoods) ASHRAE 110-95 (Method of Testing Performance of Laboratory Fume Hoods) ANSI Z9.5-1993 (Laboratory Ventilation) UL 3101-1/61010-1 CAN/CSA C22.2 No. 1010.1 Required Accessories Base cabinets Adjustable Height Base stands Remote blowers

  • Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Reduce vibration between the blower and PVC ductwork. Include two clamps for easy installation.

  • …and 48” Rear Finish Panel Kits Glacier white powder-coated steel panel hides hood's interior components on the rear to provide finished appearance. Recommended when hood is mounted on a casework island w/ back exposed. Adds 1.5" to overall depth of Floor-Mount hoods.

  • …material base, the fume hood eliminates the risk of trace-metal contamination common with traditional fume hoods. HEPA ® filters ensure clean input air. The fume hood can be connected to an in-house laboratory exhaust system or used with the SPB blower unit (N9308022). Fume hoods come flat packed…

  • …mounting hardware For use with Protector Echo Benchtop and Floor-Mounted Filtered Fume Hoods RFID User Card* Required to operate the fume hood The memory system of the hood tracks user fume hood time usage Can turn lights and fans on and off Must have other type of card…

  • …the user from hazardous fumes. Its patented* design combines all the components needed in one compact system: a heater to heat the Super Glue†; a shatter-resistant, clear protective chamber to contain the fumes as they react with the latent prints; an exhaust blower; and particulate/carbon…

  • …models. Hooded models feature epoxy-coated steel construction reinforced with tubular steel and tempered safety glass, horizontal-sliding sashes. Three collars are provided for connection to remotely-located acid fume and hood heat exhaust blower and optional auxiliary-air blower. Various…

  • Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.