Fume Hood Accessories

Frame Measures: 36" x 38" Chamfered Ends Rods are corrosion-resistant

… Compliance SEFA 1-2002 (Laboratory Fume Hoods) ASHRAE 110-95 (Method of Testing Performance of Laboratory Fume Hoods) ANSI Z9.5-1993 (Laboratory Ventilation) UL 3101-1/61010-1 CAN/CSA C22.2 No. 1010.1 Required Accessories Base cabinets Adjustable Height…

Designed to conveniently hold all Gilson Pipettes except Pipetman Concept where space is limited (fume hoods, sterile hoods, etc.). Sticks to any smooth, dry surface or fastened with screws, it keeps your pipette within reach. (Chemicals and UV light resistant). NOTE: This product is only…

…mixer has a user-enabled run time and off time settings. The unit has an orbital diameter of 4 mm for optimal vortexing. It can be used in fume hoods and cold rooms for added convenience. Each attachment has a sticker indicator for the permissible speed for that attachment.Every lab that needs…

Frame Measures: 36" x 38" x 9" Chamfered Ends Rods are corrosion-resistant

Labconco offers a variety of accessories to customize your Biosafety Cabinet, Procedure Station, Clean Bench or Filtered PCR Enclosure. Thomas No. 1197K28 Ultraviolet Lamp Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+ Biosafety…

Screen mounts behind the baffles for trapping tissue wipers & other papers. Each kit includes mounting hardware, powder-coated stainless steel screen & instructions. Contact Labconco for screens for hoods wider than 8'.

Conversion Kit for 4'-8' Protector XL Floor-Mounted Fume Hood ceiling enclosure kit (sold separately). 3-Sided Ceiling Enclosure Kits include 3 glacier white powder-coated steel panels (front & 2 sides) that extend from top of hood to ceiling to hide ductwork, plumbing & wiring. 1EA.

…and PST-51 units easily attach to the wall of your fume hood, or any other convenient location using a powerful double-sided tape. The PST-50 and PST- 51 are orientented such that they can be placed on the right or left side of your fume hood. While looking directly at the PST-50, it has the pipette…

Sash Stop Kit. Restricts how far a vertical-rising sash may be opened. Compatible with Protector Xstream and Premier Fume Hoods

Glacier white, epoxy-coated, 16 gauge steel Designed to hook on the lower rear horizontal cross member of the Telescoping Base Stand Provides storage space for wipes, cleaning agents, gloves and other miscellaneous laboratory supplies

…to be used with any INSTOCK fume hood. Fixture shipped loose for installation at the job site by mechanical trades. Each INSTOCK fume hood is pre-punched for the fast and easy installation of this alarm. The monitor provides a digital readout of fume hood face velocity and sounds an alarm…

The newly redesigned, patented* Protector XStream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than…

Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

…mounting hardware For use with Protector Echo Benchtop and Floor-Mounted Filtered Fume Hoods RFID User Card* Required to operate the fume hood The memory system of the hood tracks user fume hood time usage Can turn lights and fans on and off Must have other type of card…

Accessories available for all Erlab Captair Ductless Filtering Fume Hoods and Powder Weighing Stations, CaptCaptairStore Filtering Chemical Storage Cabinets, HALO, CaptairFlow Clean Air Enclosure, and CaptairBio PCR Workstations.

…for 100 development cycles. Shipping weight 5 lbs. (2.3 kg). Exhaust Connection Kit Allows the Fuming System to exhaust to a remote location, such as out a window or into a nearby fume hood. Includes 10' long, 4" diameter collapsible duct. Shipping weight 1 lb. (0.5 kg). Stainless Steel…

Filters for Labconco protector work stations Impregnated charcoal filter packs remove dangerous vapors from the work area 5165N47 1 3/8” filters slip behind stainless steel grill to remove formaldehyde vapors quickly and completely

Accessories for use with Heidolph Rotary Evaporators. 036000026 Control-Box: An optional upgrade accessory to control Heidolph chiller and vacuum source using the digital display of evaporator. 036210761 Ventilation and replenishment valve: For precise dosing during the process with…

4' Frame Measures: 36" x 38" 6' Frame Measures: 36" x 62" 8' Frame Measures: 36" x 86" Chamfered Ends Rods are corrosion-resistant

Simpler to use, Safer to operate Erlab’s Captair Ductless Filtering Fume Hoods and Powder Weighing Stations are designed with advanced carbon filtration, Flex Technology and a simple, innovative way to keep you safe. With Erlab’s unique ValiQuest or eValiQuest validation process,…

…beakers.  The beakers come with plastic lids. The beaker assembly can be used with flammable solvents when the ultrasonic cleaner is used in a fume hood.  (Check with your local safety department.) Cooling Coils Operation of an ultrasonic bath produces heat even when a…

…development cycles. Shipping weight 5 lbs. (2.3 kg). Exhaust Connection Kit Allows the Fuming System to exhaust to a remote location, such as out a window or into a nearby fume hood. Includes 10' long, 4" diameter collapsible duct. Shipping weight 1 lb. (0.5 kg). Stainless…

Compact, benchtop Fiberglass 30 Laboratory Hoods are designed for research, educational and clinical applications requiring small working space and efficient fume removal. The fiberglass liner is corrosion-resistant, durable, fire-resistant and light reflective. The smooth one-piece molded…

…of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer life. Like the Protector XStream Hoods, Protector Premier Hoods…

…sashes. Three collars are provided for connection to remotely-located acid fume and hood heat exhaust blower and optional auxiliary-air blower. Various electrical configurations Required Accessories Kjeldahl digestion flasks Remote exhaust blower Ductwork

Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

…outside ducting Non-sparking motor/blower Foot operated on/off switch Durable construction Hard rubber casters Adjustable blower speed An accessory to the Protector® VS™ Ventilation Station, the Filtermate filters the contaminated air generated and returns purified air to the laboratory.…

…Filtering Fume Hoods, Powder Weighing Stations, Captair Flow Clean Air Enclosures, CaptairBio PCR Workstations, and CaptairStore Ductless Filtering Storage Cabinets (834 & 1634)  Units do not come standard with a stainless steel work surface, this would be an optional accessory under…

Compact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters to…