Fritted Tube

Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D. x 20mm long. Overall length is approximately 10 inches.

Filter Tube, Fritted, Glass Stopcocks, Synthware, Inner Joints: 14/20 or 24/40, Frit OD: Sizes available ranging from 30-36mm, Frit Porosity: Coarse or Medium, Stopcock Bore: 2mm, Stopcocks have constant pressure retention device

Filter Tube, Fritted Disc, Inner Joints, Synthware, Joints: 14/20 and 24/40 available, Frit OD: Available in sizes ranging from 20-36mm, Frit Porosity: Coarse or Medium available.

Gas Dispersion Tube, Fritted, Synthware, Disc Diameter: 10mm, Disc Porosity: Extra Course, Course and Medium available, Stem OD: 8mm, Stem Length: 150mm

Micro size gas dispersion tube having a frit 7mm O.D. x 12mm. Stem is 6mm O.D. x 100mm long.

Gas Dispersion Tube, Fritted, 15° Angle, Synthware, Disc Diameter: Available in sizes ranging from 10-40mm, Porosity: Medium, Course or Extra Course available, Required Opening Diameter varies, The 15° angle permits tube to be inserted into vessels where a large opening is not available.

Gas Dispersion Tube, Fritted, 90, Synthware, Disc Diameter: Available in sizes ranging from 20-40mm, Required opening diameter varies , Porosity: Medium, Coarse or Xtra Coarse available, Stem OD: 8mm, Stem Length: 150mm, The 90° angle permits bubbles to be spread over a large area.

Sparging accessory for vertical sidearm spinner flasks. Manufactured from 316l stainless steel with electropolish finish. Includes polypropylene cap with 1/4? white compression fitting and white silicone gasket. .040 inch hole for aeration of fermentation cultures where shear force is less critical.…

…apparatus uses glass vials or tubes for sample collection and concentration. Some sorbents require large desorption volume than small SPE cartridges in such case SPE tubes were used. Synonyms: SPE Reservoir Application: Empty SPE Tube (no frits) was coupled with closed-face polystyrene…

Synonyms: SPE Reservoir

Synonyms: SPE Reservoir

…spinner flasks. Includes polypropylene cap with 1/4" compression fitting and white silicone gasket. 10 Micron porosity frit for cell cultures where shear is critical. Specifications: Material: 316l Stainless Steel Ra 32 Finish Or Better Dimensions: 20x5 1/8" Tube With Hose Barb End

…sample through fritted bubbler tube Ground glass joint fits into neck on standard 300 mL BOD bottle (see Thomas number 1781N43) Air inlet and outlet, 5 mm o.d.; insert check valve for positive flow protection With 6 rubber stoppers; syringe, bottle, connecting tubing and check…

Empty SPE Tubes allow you to pack your own SPE cartridges Synonyms: pk 16, Empty Fritted 60-ml SPE Tubes

Empty SPE Tubes allow you to pack your own SPE cartridges Synonyms: pk 20, Empty Fritted 20-ml SPE Tubes

…extraction apparatus uses glass vials or tubes for sample collection and concentration. Some sorbents require large desorption volume than small SPE cartridges in such case SPE tubes were used. Application: Empty polypropylene SPE tube with PE frits was used in preparing multi-walled carbon…

Empty SPE Tubes allow you to pack your own SPE cartridges.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Sparger for vertical sidearm spinner flasks. Includes polypropylene cap with 1/4? compression fitting and white silicone gasket. Material: 316l stainless steel with electropolish finish Ra 32 finish or better Size: 21?

These PYREX® gas dispersion tubes have a 30mm diameter coarse porosity (40 to 60µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller bubbles, however greater…

For supporting funnels, Gooch crucibles, filter tubes, etc., in filtration assemblies Particularly suitable for Buchner and fritted glass funnels, porcelain filters without head pieces and for reverse flow cleaning of filter crucibles Adapters will withstand autoclaving Taper angle in all sizes…

Tenax(R) GR is a glass prepacked sampling tube. All of the pre-packed glass sampling tubes incorporate a glass frit at the inlet, which increases their performance, and are individually numbered. Synonyms: Tenax(R) GR GLASS TD TUBE, 7IN, FOR GERSTE Legal Information: Tenax is a registered…

Frits are critical components of the HPLC system design and act as a depth filter for the concurrent physical removal of small molecules. Frits are available in various materials. Medium, 20 mum porosity frits are used for crystalline precipitates and extraction applications.

Column has standard taper 24/40 joint at top and 2 mm bore stopcock at the bottom with Por. B (70-100m) fritted disc sealed into the bottom of tube.

…0-4mm metering Chem-Vac™ Chem-Cap® valve. See CG-1506 for single neck round bottom flasks for use with AF-0540 swivel frit filter. PLEASE NOTE: FILTER TUBE AND 90º ADAPTER MUST BE ORDERED SEPARATELY. **Design Suggested By: Dr. John E. Bercaw and Dr. Barbara J. Burger, California…

Tall form gas washing bottle having a standard taper 34/28 top joint, hex base and coarse fritted tube for gas dispersion. Stopper is held in place with two CG-110-02, 18mm stainless steel springs. Springs are supplied when bottle is ordered complete.

Similar to CG-1186 but with a sealed in COARSE porosity fritted disc to support column packing. Lower end of the column has a round bottom. Column is constructed using MEDIUM WALL TUBING.

Cylindrical, heavy-wall reaction flask with an integral fritted disc. Flask has flat flange top with an o-ring groove. For heads see 6528, 6529 and 6530 series. Can be used with 6517 quick clamp or two piece clamp. Bottom outlet tube.