Fritted Glass Tube

Filter Tube, Fritted, Glass Stopcocks, Synthware, Inner Joints: 14/20 or 24/40, Frit OD: Sizes available ranging from 30-36mm, Frit Porosity: Coarse or Medium, Stopcock Bore: 2mm, Stopcocks have constant pressure retention device

Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D. x 20mm long. Overall length is approximately 10 inches.

Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

Filter Tube, Fritted Disc, Inner Joints, Synthware, Joints: 14/20 and 24/40 available, Frit OD: Available in sizes ranging from 20-36mm, Frit Porosity: Coarse or Medium available.

Gas Dispersion Tube, Fritted, Synthware, Disc Diameter: 10mm, Disc Porosity: Extra Course, Course and Medium available, Stem OD: 8mm, Stem Length: 150mm

Column has standard taper 24/40 joint at top and 2 mm bore stopcock at the bottom with Por. B (70-100m) fritted disc sealed into the bottom of tube.

…0-4mm metering Chem-Vac™ Chem-Cap® valve. See CG-1506 for single neck round bottom flasks for use with AF-0540 swivel frit filter. PLEASE NOTE: FILTER TUBE AND 90º ADAPTER MUST BE ORDERED SEPARATELY. **Design Suggested By: Dr. John E. Bercaw and Dr. Barbara J. Burger, California…

…wall tubing with 821000 PTFE stopcock Similar in design to the 420530 series 40-60 micron porosity glass frit at the lower end to act as a support for column packing material Replacement stopcock plug is 821001 Manufactured from 33 expansion, low extractable borosilicate glass conforming…

Gas Dispersion Tube, Fritted, 15° Angle, Synthware, Disc Diameter: Available in sizes ranging from 10-40mm, Porosity: Medium, Course or Extra Course available, Required Opening Diameter varies, The 15° angle permits tube to be inserted into vessels where a large opening is not available.

Gas Dispersion Tube, Fritted, 90, Synthware, Disc Diameter: Available in sizes ranging from 20-40mm, Required opening diameter varies , Porosity: Medium, Coarse or Xtra Coarse available, Stem OD: 8mm, Stem Length: 150mm, The 90° angle permits bubbles to be spread over a large area.

Tall form gas washing bottle having a standard taper 34/28 top joint, hex base and coarse fritted tube for gas dispersion. Stopper is held in place with two CG-110-02, 18mm stainless steel springs. Springs are supplied when bottle is ordered complete.

Cylindrical, heavy-wall reaction flask with an integral fritted disc. Flask has flat flange top with an o-ring groove. For heads see 6528, 6529 and 6530 series. Can be used with 6517 quick clamp or two piece clamp. Bottom outlet tube.

…fritted disc sealed above lower inner joint. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. Frit reduces foam overflow from being drawn into the condenser. With two 4mm drain holes at the base of the inner tube to…

Synthware rotary evporator anti-splash trap with extra coarse fritted disc. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. the frit reducesfoam from being carryover. With upper outer and lower inner standard taper…

Fused, fritted glass disc Polished ends Pore size: coarse, 40-60 µm, medium, 10-15 µm, fine 4-5.5 µm 30 mL disc diameter: 30 mm; fits tube i.d. 36 mm, 50 mL disc diameter: 40 mm; fits tube i.d. 42 mm.

…µm borosilicate glass frit sits lower than conventional glass filters to draw more mobile phase from each bottle Blue filter stem allows instant visual confirmation of upright filter orientation Connects to standard 1/8" OD (3.2 mm) PTFE tubing using your existing frit adaptor (also…

Filter tube with #15 Ace Threds on ends and an integral fritted disc. Disc diameter is 50mm and is available in different porosities. Supplied with #15 nylon bushings and 1/4" polypropylene hose barbs.

…back into the crystals in the first arm. This process may be repeated as often as necessary. After removal of the final supernatant liquid, dried crystals may be transferred to a Schlenk Tube. With four 14/20 outer joints and porosity B (70-100m) fritted disc. Approximate volume in each arm is 75mL.

Consisting of glass tube 8 mm outside diameter with fritted cylinder, 12 mm diameter, fused onto the lower end; overall length, 250 mm Offered in extra coarse (EC) and coarse (C) porosities

…of sorbent in the tube; conditioned tubes also include a blank chromatogram. Empty tubes for direct desorption of VOCs from liquids, solids, or pastes Stainless steel: front sorbent-retaining gauze, rear gauze, and gauze retaining spring supplied; or glass: glass frit positioned 15 mm from…

Porous fritted glass filter stick used to fabricate gas dispersion tubes. Measures 10mm O.D. x 20mm long, hollow at one end. Packed 6 per package. Minimum order, one package.

glass TD tube, fritted, O.D. × I.D. × L 6 mm × 4 mm × 4.5 in., preconditioned, pkg of 1 ea Synonym(s): Carbotrap ® 400 Dynatherm ™ ACEM, 890, 850

…sample through fritted bubbler tube Ground glass joint fits into neck on standard 300 mL BOD bottle (see Thomas number 1781N43) Air inlet and outlet, 5 mm o.d.; insert check valve for positive flow protection With 6 rubber stoppers; syringe, bottle, connecting tubing and check…

…adapter is designed to be used with the Büchi® R-200/205 rotary evaporators. This adapter combines a vapor tube adapter and a bump trap. Trap has an extra coarse fritted disc sealed between the lower inner joint and the top flange. Adapters have a 50mm OD top flange with a tapered interior…

With fritted disc sealed on bottom. Overall length 125mm. All porosities of a given size are priced the same.,/p>

With porous fritted glass tip. Available in 150mm and 300mm lengths. O.D. of both lengths, 10mm. Fits through #11 Ace-Thred.

Supplied with 6, 7 or 8mm O.D. stem tubing, 150mm in length. Maximum O.D. of stem and filter disc is 20mm. Filter disc is 10mm diameter, porosity B (70-100 m).

Used in filtering glucose, agar and serums. All porosities of a given size are priced the same. Top accepts #3 or #4 rubber stopper.

For sulphur absorption chamber, after Edgar and Callingaert. Diameter of disc 30mm, height above disc 200mm, capacity 130mL. Will fit a No. 7 rubber stopper.