Fritted Glass Support Base

Compare Tool

Select up to 3 products

Fritted Glass Support Base
1 - 25 of 25
Sort
View
Show
  • PYREX® Graduated Funnel, 47 mm, for Assembly with Fritted Glass Support Base

    Corning

    These graduated funnels,are designed for assembly with the fritted glass support base. Cat. No. 33972-B.

  • PYREX® Fritted Glass Support Base, 47 mm, for Assembly of Graduated Funnel

    Corning

    This 47 mm fritted glass support base is designed for assembly with either the 300 mL graduated glass funnel, Cat. No. 33971-300 or 1000 mL graduated glass funnel, Cat. No. 33971-1L.

  • 47mm Filtration Assembly with Fritted Glass Support

    DWK Life Sciences (Wheaton)

    …sealing ring Glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Recommended for general filtration Includes a coarse porosity (40-60 μm) fritted glass support base, 300mL graduated…

  • Microanalysis Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    … Unlaminated PTFE or PVDF membranes are recommended for solvent applications. Complete set includes a borosilicate glass funnel and base, fritted glass filter support, anodized aluminum spring clamp, and silicone stopper. Parts are also available seperately. Filter Diameter: 25mm, Filtration…

  • ULTRA-WARE® Microfiltration Assembly with Fritted Glass Support and Ground Joint…

    DWK Life Sciences (Kimble)

    …solvents. The ground glass connection eliminates the possibility of phthalate contamination that can occur when using silicone or neoprene stoppers Each apparatus is supplied with 1000 mL funnel; 90 mm, 40-60 micron porosity, fritted glass support base; anodized aluminum clamp; and…

  • 47mm Filtration Assembly with Standard Taper 40/35 Joint Connection and Fritted…

    DWK Life Sciences (Wheaton)

    …corrosive liquids for particulate contamination analysis The flask and fritted glass base are joined with a Standard Taper 40/35 ground joint, so liquids will only come in contact with borosilicate glass Vacuum hose connection is located above the filtration drip tip to prevent…

  • 25mm Glass Vacuum Holder Assemblies

    Advantec MFS

    glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. The holder utilizes a 25mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel and base. While the sintered glass frit support

  • 13mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …anodized aluminum clamp secures the membrane between the funnel and sintered glass frit support base. Available in three graduated funnel capacities 100, 500, or 1000 mL. The 13mL/100mL  features a two-part ground glass funnel for concentrating samples. The 13mL micro funnel mounts directly…

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …that would tend to clog a 47mm diameter filter. The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen is recommended for viscous or proteinaceous solutions…

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures particles will not be shed into the filtrate. The PTFE support

  • 47mm Glass Vacuum Holder, PTFE Seal

    Advantec MFS

    glass surface post autoclaving. The funnel bottom is coated with PTFE. The PTFE flange covers the contact surface on the glass base(except for the sintered glass base). The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can…

  • Filterware™ Microfiltration Glassware

    Wilmad-LabGlass - SP Scienceware

    These filter assemblies for FILTERWARE™ filtration system consist of an all-borosilicate glass funnel, fritted glass support base, aluminum clamp, and silicone stopper. Choose from 47mm or 90mm filter assembly sizes. Individual components are offered in various sizes for a customized unit. For…

  • Filtration Assemblies & Flask

    DWK Life Sciences (Kimble)

    …stainless steel support screen, PTFE support screen gasket, glass support base, 15 mL graduated funnel, anodized aluminum clamp and a #5 silicone stopper. Fritted Glass Support, 47 mm (4588A05) Used for general filtration. Supplied with a coarse fritted glass support base, 300 mL…

  • Vacuum Filter Assemblies

    DWK Life Sciences (Wheaton)

    …low extractable borosilicate glass Unit includes a coarse porosity fritted glass filter support base, an aluminum clamp and a 300 mL glass funnel Screen is removable in assemblies with stainless steel support screen. Assemblies with Teflon® faced bases and funnels allow the assembly…

  • Funnel / PTFE Supp Assy 47mm

    DWK Life Sciences (Kimble)

    … Supplied with a 40-60 micron porosity PTFE-faced fritted glass support base, a 300 mL PTFE-faced graduated funnel, an anodized aluminum clamp and a #8 silicone stopper PTFE coating prevents membrane from adhering to ground glass surface Funnels are graduated from 100 to 250 mL in 25…

  • Ultra-Ware All-Glass Microfiltration Apparatus

    DWK Life Sciences (Kimble)

    …stoppers. Support base has a coarse porosity glass frit and an integral vacuum connection that is located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus is supplied with funnel, anodized aluminum clamp, fritted glass support base and filtration…

  • 25mm All-Glass Filtration Assemblies

    Advantec MFS

    glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum line. The anodized aluminum clamp secures the 25mm membrane between the funnel and base. While the sintered glass frit support base

  • 47mm All-Glass Filtration Assemblies

    Advantec MFS

    glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum line. The anodized aluminum clamp secures the 47mm membrane between the funnel and base. While the sintered glass frit support base

  • Filter Assy 90mm w/4L Flask

    DWK Life Sciences (Kimble)

    …apparatus with fritted glass support, the ground joint connection eliminates the possibility of phthalate contamination that can occur when using silicone or neoprene stoppers Each apparatus is supplied with 1000 mL funnel, 90 mm glass support base, 40-60 micron porosity fritted glass disc,…

  • Filter Assy 90mm w/2L Flask

    DWK Life Sciences (Kimble)

    …apparatus with fritted glass support, the ground joint connection eliminates the possibility of phthalate contamination that can occur when using silicone or neoprene stoppers Each apparatus is supplied with 1000 mL funnel, 90 mm glass support base, 40-60 micron porosity fritted glass disc,…

  • 47mm Phase/Fraction Collector Filtration Assemblies

    Advantec MFS

    …is supported on a manifold or standard 1L flask by a No.8 silicone stopper. The P/FC2 couples to a 40/35 male taper on extraction manifold or 1L flask. The anodized aluminum clamp secures the 47mm membrane between the 300mL graduated funnel and base. While the sintered glass frit support base can…

  • SYNTHWARE Filtration Apparatus

    Kemtech America

    …filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and l liter filtering flask.

  • Microfiltration Apparatus, 47 mm, with Stainless Steel Support, ULTRA-WARE®

    DWK Life Sciences (Kimble)

    …with fritted glass support, the ground joint connection eliminates the possible phthalate contamination that can occur when using silicone or neoprene stoppers. Each apparatus is supplied with funnel, anodized aluminum clamp, stainless steel support screen, PTFE gasket, 47 mm glass support base and…

  • PYREX® 47 mm Microfiltration All-Glass Assembly, 300 mL Funnel, Complete

    Corning

    …organic solvents. The components of this 47 mm glassware are interchangeable with competitive products. Filtration Apparatus Complete: 300 mL funnel, 1L flask with a 40/35 standard taper joint (inner), 47 mm fritted all-glass support base has a 40/35 standard taper joint (outer), aluminum clamp.

  • 47mm Sterility Test Filter Holder

    Advantec MFS

    …secures the membrane between the funnel and sintered glass frit base. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. Unit includes: Funnel, Flange(not included w/ sintered glass base), Base, Support, Clamp, Stopper Please Note: ALL Advantec items…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.