Fritted Disc

These fritted disc funnels are very useful in preparative work, or in making separations where it is necessary to wash the precipitate and redissolve with chemicals, which would attack filter paper. The angle of the funnel body facilitates the removal of precipitates. These funnels are available…

Porous fused quartz discs. Porosity sizes are as listed and differ from porosities of borosilicate discs.

Plain, open top, chromatographic column, with porosity B (70 - 100 m) fritted disc sealed in.

Filter Tube, Fritted Disc, Inner Joints, Synthware, Joints: 14/20 and 24/40 available, Frit OD: Available in sizes ranging from 20-36mm, Frit Porosity: Coarse or Medium available.

Column has standard taper 24/40 joint at top and 2 mm bore stopcock at the bottom with Por. B (70-100m) fritted disc sealed into the bottom of tube.

Chromatographic column with 2mm bore, 1:5 taper solid PTFE stopcock plug and porosity B (70 - 100 m) fritted disc sealed in.

Basic column used for many separations in adsorption and ion exchange chromatography. 40-60 micron porosity fritted disc is sealed in Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Similar to CG-1186 but with a sealed in COARSE porosity fritted disc to support column packing. Lower end of the column has a round bottom. Column is constructed using MEDIUM WALL TUBING.

Similar to CG-1041, but with the addition of an Extra Coarse fritted disc between the lower inner and top outer joint.

Cylindrical, heavy-wall reaction flask with an integral fritted disc. Flask has flat flange top with an o-ring groove. For heads see 6528, 6529 and 6530 series. Can be used with 6517 quick clamp or two piece clamp. Bottom outlet tube.

Porous discs for use in fabrication of special glass apparatus. Available in F, M, C and XC porosities. Pressure Limits: Fritted glassware is designed for low pressure vacuum filtration or gas flow. The MAX differential pressure should not exceed 15 PSI. Thermal Limits: Fritted glassware…

Firestone splash guard adapter with medium length joints that will accept full length joints. Internal porosity A (147-174 micron) fritted disc that assures no carry-over in the event of pot splash-up. Overall length is kept to a minimum to positively

Filter Funnel with Fritted Disc with 2mm glass stopcocks. Joint Size: 14/20 or 24/40, Frit O.D: 30mm, Porosity: Coarse or Medium, Capacity: 60mL.

…extra coarse fritted disc as the distributor. The fritted disc provides greater efficiency and more uniform dispersion of gas bubbles for complete absorption. This extra coarse frit has a nominal pore distribution of 170 to 220µm. Please check the Guide to Selecting and Using Fritted Glassware…

…extra coarse fritted disc as the distributor. The fritted disc provides greater efficiency and more uniform dispersion of gas bubbles for complete absorption. This extra coarse frit has a nominal pore distribution of 170 to 220µm. Please check the Guide to Selecting and Using Fritted Glassware in…

…with heavy wall design. Supplied with a PTFE stopcock and a reinforced beaded top. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent re-mixing of components that are already seperated.

…an integral reservoir, PTFE stopcock and a top spherical socket joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent re-mixing of components that are already seperated. Joint: SJ…

…design. Supplied with a PTFE stopcock and a top spherical socket joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent re-mixing of components that are already seperated. Joint: SJ…

…integral reservoir, PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent re-mixing of components that are already seperated. Top Joint:…

…Supplied with a PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent re-mixing of components that are already seperated. Top Joint:…

…column manufactured from medium wall tubing with 821000 PTFE stopcock Similar in design to the 420530 series 40-60 micron porosity glass frit at the lower end to act as a support for column packing material Replacement stopcock plug is 821001 Manufactured from 33 expansion, low…

Synthware rotary evporator anti-splash trap with extra coarse fritted disc. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. the frit reducesfoam from being carryover. With upper outer and lower inner standard taper…

Similar to CG-1202 but with a COARSE porosity fritted disc sealed into the lower end of the column for packing support. Column is constructed using MEDIUM WALL tubing. Can be used with CG-1201 flow controller. Connection between the column and flow control adapter are spherical joints connected with…

Similar to CG-1188 but with a sealed in COARSE porosity fritted disc to support column packing. Column is constructed using MEDIUM WALL TUBING. Can be used as a gravity eluted column or a flash column (as described by W.C. Still, M. Kahn and A. Mitra of Columbia University in JOURNAL OF ORGANIC…

Similar to CG-1196 but with a COARSE porosity sealed in fritted disc to support column packing. Column is constructed using MEDIUM WALL TUBING. Can be used as a gravity eluted column or a flash column (as described by W.C. Still, M. Kahn and A. Mitra of Columbia University in JOURNAL OF ORGANIC…

Similar to CG-1192 but with a sealed in COARSE porosity fritted disc to support column packing. Column is constructed using MEDIUM WALL TUBING. Can be used as a gravity eluted column or a flash column (as described by W.C. Still, M. Kahn and A. Mitra of Columbia University in JOURNAL OF ORGANIC…

Similar to CG-1198 but with a COARSE porosity disc sealed into the lower end of the column for packing support. Column is constructed using MEDIUM WALL tubing. Can be used with optional CG-1201 flow controller and CG-1200 reservoir. Lower end of the column has a round bottom. Connections between the…

…anti-splash trap, modified. With extra coarse porosity fritted disc sealed above lower inner joint. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. Frit reduces foam overflow from being drawn into the condenser.…

…tubes have a 30mm diameter coarse porosity (40 to 60µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller bubbles, however greater gas pressure is required.…

…column in a coarse porosity (40 to 60µm) fritted disc. The volume below the disc is minimized to prevent mixing and to allow clear, sharp, band definition. For more information on fritted products, please check the Guide to Selecting and Using Fritted Glassware in the Technical Information Listing.…