Freeze Dry Flask

Glassware kit for freezone freeze dryers. Includes one 600 ml complete fast-freeze flask (7540800), one 300 ml complete fast-freeze flask (7540600), one 3/4” SST straight adapter (7547200) and one 3/4” SST 45° bend adapter (7547600).

…washers, gaskets, retainers and other small components easily misplaced. Has three components; a borosilicate glass top and bottom with a silicone rubber seal. Uniform glass walls maximize heat transfer while maintaining structural strength. Flasks provided with 24/40 or 19/38 Standard Taper joint.

Made of borosilicate glass, these freeze drying flasks are used with VirTis® lyophilizing equipment. Openings are extra-wide for efficient shell freezing and suited for bulky samples. Wall thickness of flask is designed for vacuum applications. These flasks are supplied with a nylon translucent…

Flat bottom borosilicate flask for use with Labconco and Virtis freeze dryers. Wide mouth design provides easy access sample. PLEASE NOTE: FLASKS ONLY. NOT SUPPLIED WITH RUBBER TOP, FILTER OR O-RING. Note: Labconco and Virtis are not related to or affiliated with Chemglass, and these…

…bottom for  Fast-Freeze Flasks, they withstand extreme temperatures and high vacuum. Made of borosilicate glass 600 mL Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. A complete Fast-Freeze Flask consists a rubber top, glass…

Wide mouth, flat bottom Autoclavable Compatible with all major brands of laboratory freeze-dry apparatus Flexible silicone rubber caps, which are placed over adapters in central port of cap to prevent loss of solids and cross-contamination Requires adapter for attachment to valves …

…and high vacuum. Tops feature a wide mouth opening to load fast and clean easily. Flat bottoms reduce spills and provide better balance. Lyph-Lock Seals hold top and bottom of Lyph-Lock Flasks together during pre-freezing and lyophilization. Made of flexible, non-contaminating silicone rubber.

Dual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head

…Fast Freeze Flasks 120mLs up to 2000mLs. These adapters allow filling a freeze dry flask under sterile conditions prior to lyophilization. After filling the flask, the valve is closed off isolating the contents for transportation to the freeze dryer. Once the flask is attached to the freeze dryer…

…mounted directly onto freeze dryer. For detecting end point in more than one sample (up to five), the End-Zone Add-On Kit is available. FreeZone Freeze Dryer with Lyo-Works OS, drying chamber or manifold with valve ports, vacuum pump, and 600 ml or larger Fast-Freeze Flask are required for…

…of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad’s versatility and compact design make it perfect for busy labs. Now with Lyo-Works™ OS the Triad is smarter than ever, making freeze drying even challenging…

…(1177K31) Slant Freeze Flask Holder accommodates flasks of any size. Manually adjust angle from 5° to 35°. Made of powder-coated steel. Excellent for pre-freezing flasks for greater surface area. FreeZone Cart (1177K42) Slant Freeze Flask Holder accommodates flasks of any size.…

…detected in the drain line. If the vacuum level is higher than 5 mill bar for 30 minutes the vacuum pump will automatically turn off. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…detected in the drain line. If the vacuum level is higher than 5 mill bar for 30 minutes the vacuum pump will automatically turn off. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…detected in the drain line. If the vacuum level is higher than 5 mill bar for 30 minutes the vacuum pump will automatically turn off. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…detected in the drain line. If the vacuum level is higher than 5 mill bar for 30 minutes the vacuum pump will automatically turn off. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…detected in the drain line. If the vacuum level is higher than 5 mill bar for 30 minutes the vacuum pump will automatically turn off. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…detected in the drain line. If the vacuum level is higher than 5 mill bar for 30 minutes the vacuum pump will automatically turn off. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…for isolating the vacuum pump from the freeze dryer and built-in stainless steel mini vacuum drying chamber with control to +60°C. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…for isolating the vacuum pump from the freeze dryer and built-in stainless steel mini vacuum drying chamber with control to +60°C. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…for isolating the vacuum pump from the freeze dryer and built-in stainless steel mini vacuum drying chamber with control to +60°C. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…for isolating the vacuum pump from the freeze dryer and built-in stainless steel mini vacuum drying chamber with control to +60°C. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…steel bath that includes ½ hp HCFC/CFC-free refrigeration system capable of cooling the heat transfer solution to -40°C. Vacuum pump with a displacement of at least 98 liters/minute, drying accessory and freeze dry glassware (if not bulk freeze drying) are required (not included).

…plugs, 2 each clamps and 1 straight stainless steel adapter. Used for freeze drying ampules. Adapter attaches to port on Freeze Dryer. 750mL Fast-Freeze Flask Bottom, Clear (1171J05): Clear glass Fast-Freeze Flask Bottom, 750 ml, 90.2mm dia. x 162mm. High strength borosilicate glass…

…full color, capacitive touchscreen. Lyo-Works OS controls optional drying accessories providing 30 programs that can hold up to 16 segments each as well as the optional End-Zone™ end point detection system for flask freeze drying. Display includes navigation to start-up mode, vacuum set point,…

…full color, capacitive touchscreen. Lyo-Works OS controls optional drying accessories providing 30 programs that can hold up to 16 segments each as well as the optional End-Zone™ end point detection system for flask freeze drying. Display includes navigation to start-up mode, vacuum set point,…

…full color, capacitive touchscreen. Lyo-Works OS controls optional drying accessories providing 30 programs that can hold up to 16 segments each as well as the optional End-Zone™ end point detection system for flask freeze drying. Display includes navigation to start-up mode, vacuum set point,…

…full color, capacitive touchscreen. Lyo-Works OS controls optional drying accessories providing 30 programs that can hold up to 16 segments each as well as the optional End-Zone™ end point detection system for flask freeze drying. Display includes navigation to start-up mode, vacuum set point,…

…full color, capacitive touchscreen. Lyo-Works OS controls optional drying accessories providing 30 programs that can hold up to 16 segments each as well as the optional End-Zone™ end point detection system for flask freeze drying. Display includes navigation to start-up mode, vacuum set point,…

…1/2" & 3/4" adapters for flask connection. Includes latching pin. For use w/ FreeZone Freeze Dryers. Clear Chamber, Tall (1177K21): 12.0" dia. acrylic chamber fits all FreeZone Freeze Dryers. Provides visibility for bulk freeze drying. Accomodates Product Shelves (3…

…glass bottom withstands extreme temperatures and high vacuum Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds Fast-Freeze Flasks and Adapters are compatible with any brand freeze dryer that has 1/2" or 3/4" diameter valve ports