Frame Connector

Compare Tool

Select up to 3 products

Frame Connector
1 - 32 of 34
Sort
View
Show
  • Square Section Work Holder

    Harvard Apparatus

    Of glass-filled Nylon Combination vise and rod clamp for securing rectangular objects to support rod Alternately, can be used to support a rod vertically on water bath wall or in-line with top Takes objects up to 3/4” (19 mm) thick and has thumbscrew with cushioned tip to…

  • LabJaws Round Support Plates

    Ohaus

    Aluminum plate supports beakers, mantles and petri dishes. Fits standard lab-frames using connectors or holders.

  • Labjaws Connectors and Mounting Brackets

    Ohaus

    …lab frame rods at 90° angle. Twin angled screws allow independent rod adjustment and easy access. Nickel plated cast zinc construction. Multi-Rod Connector (2824E43) Maximum adjustment capability within one connector. Two adjustment rods fit into the oval hole in the connector,

  • Connector, Open-Sided

    Harvard Apparatus

    Of glass-filled Nylon with stainless steel thumbscrew shafts Holds rods or clamp stems up to 1/2” (13 mm) diameter at right angles to each other Open-sided; can be removed without disturbing support Includes two thumbscrews and 1/2” (12 mm) swivel adapter. Without…

  • CONNECTOR - FRAME PK/12

    Ohaus

  • Frame Connectors, Hooks & Support Apparatus

    Ohaus

    …aluminum construction. Ideal for holding clamps to lab-frames or ring stands. Hook Connector Stainless steel electro-polished finish or nickel-plated zinc construction. Simple, versatile, and easy-to-use. Hook connectors allow one-handed assembly of two components with one adjustment screw.

  • Ultra Flex Support System With Lab Frame Connector

    Ohaus

    …system is extremely versatile. Flexible arm can be placed in virtually any position or angle. System features 2-prong clamp head, 3-prong clamp head, spring clamp head, nickel-plated flex arm in 12” (30.5 cm) or 18” (45.7 cm) length, cast alloy lab-frame connector and utility wrench.

  • Open Lab Rod Connector for Lab Frame Assemblies

    Lee Engineering

    Joins rod frames in different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 14"-20 hex screws. Stainless steel. Handle…

  • Stronghold Scaffold Frame Kits

    Harvard Apparatus

    …apparatus on the laboratory table, wall or floor Provide a basic lattice structure with individual lattices approximately 500 x 300 mm Kits consist of various lengths of stainless steel rods (13 mm diameter), glass-filled Nylon connectors, stainless steel socket screws and one hexagonal key

  • Stronghold Scaffold Frame Kits

    Harvard Apparatus

    …on the laboratory table, wall or floor Provide a basic lattice structure with individual lattices approximately 500 x 300 mm Kits consist of various lengths of stainless steel rods (13 mm diameter), glass-filled Nylon connectors, stainless steel socket screws and one hexagonal key

  • Aluminum Quick Action Lattice Connector

    Lee Engineering

    Joins 1/2" Rod frames Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm

  • LabJaws Connectors & Holders

    Ohaus

    … All-Position Clamp Holder (1185N72) Surpasses standard holding capabilities. The all-position clamp holder permits adjustments at any angle, in any plane. Holders are set at 90° to each other and connected by a 90° connector, allowing 360° rotation. Nickel-plated zinc construction.

  • Zinc Lattice Connectors

    Lee Engineering

    Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 1/4"-20 hex screws. Non ferrous…

  • Stronghold Support 360 Rotation Connectors

    Harvard Apparatus

    …clamp stems of 3/8” or 1/2” (9.5 or 13 mm) diameter. 8847E37 Connector similar to 8847E35, except that two caps are identical and both take rods or extension clamp stems of 3/8” or 1/2” diameter. Both connectors include two threaded handles for securing rods. Without rods.

  • Stronghold Lattice Frame Mounting Kits, 78 X 39 (2000 mm X 1000 Mm)

    Harvard Apparatus

    …6 rods, 20” long, 7 rods, 39” long, 3 rods, 78” long, 24 lattice clamps, 6 lattice mounts, 3 tee connectors, 3 male/female hinged adapters, 3 large connectors, 360° and 1 Allen wrench 8846F12 Deluxe Bench Mounting Kit includes 3 rods, 20” long, 7 rods, 39” long,…

  • Stronghold Lattice Frame Mounting Kits, 23 X 23 (600 mm X 600 Mm)

    Harvard Apparatus

    Wall Mounting Kit includes 4 rods, 6” long (150 mm), 2 rods, 10” long (250 mm), 5 rods, 23” long (600 mm), 8 lattice clamps, 6 lattice bases, 4 tee connectors, 2 male/female hinged adapters and 1 Allen wrench.

  • Connector, T-Type

    Harvard Apparatus

    …adapters that have a male connector to vertical lattice rods or laboratory stands One end has open side to clamp rod up to 1/2” (13 mm) diameter and lock with thumbscrew. Opposite end has female socket 3/4” (19 mm) deep that takes male connector or butt end of rod up to 1/2”…

  • Connector, End-to-End

    Harvard Apparatus

    …steel thumbscrew shafts For joining rods of the same or varying diameters, end to end Takes rods up to 1/2” (13 mm) diameter Center barrier within connector prevents rods from touching Each rod held by separate thumbscrew Includes two thumbscrews. Without rods.

  • Connector, Closed

    Harvard Apparatus

    …parallel to one another Can be positioned anywhere along length of rod Rods held in place by separate thumbscrews Two of these connectors can be used together to produce three-dimensional support structure Includes two thumbscrews and 1/2” (12 mm) swivel adapter.…

  • Lattice Mount

    Harvard Apparatus

    Of glass-filled nylon For mounting a lattice rod parallel to a surface: to floor, shelf, wall, etc. Open-sided connector has base with two countersunk screw holes Takes any rod up to 1/2” (13 mm) Rod is held in place by thumbscrew; without rod

  • Clamp, Lattice

    Harvard Apparatus

    Of glass-filled nylon Has two open sides which take (and lock in place, at right angles) rods up to 1/2” (13mm) diameter Locking screws are M5 (5 mm) thread Allen set screws 1/2” (13 mm) long; without rod

  • Rod Coupler, Aluminum

    Lee Engineering

    Extend the length of your lab frame rods. This strong, corrosion-resistant aluminum alloy connector permits end-to-end joining of 12.7 mm (1/2") rods in diameter. Precision machining ensures rod alignment. Comes with two tee handles for adjustment.

  • Rod Coupler, Stainless Steel

    Lee Engineering

    Extend the length of your lab frame rods. This strong, corrosion-resistant aluminum alloy connector permits end-to-end joining of 12.7 cm rods in diameter. Precision machining ensures rod alignment. Comes with two tee handles for adjustment.

  • Stronghold Support Hinged Adapters

    Harvard Apparatus

    connector or the butt end of 1/2” (13 mm) rod Male connector can be used to mount hinged connector on lattice rod or laboratory stand by means of closed connector, open-sided connector or “T” connector Hinged adapters are offered in three combinations of male connector

  • Labjaws Lab-Frame Kits

    Ohaus

    …fit any space or application. Select from 13 pre-configured lab-frame kits (connectors and feet included) to rods which can be purchased individually and combined with LabJaws accessories to build a customized frame. Thirteen lab-frame kit options are available - with four specifically designed…

  • Stronghold Support Glass-Filled Nylon Jaw Clamps

    Harvard Apparatus

    …Clamp has male connector; 8847T06 has ball joint adapter. Medium clamps have fixed screw action and open to 1 3/4” (45 mm) for tubes, flasks, columns and larger rods. 8847T08 Clamp has extension stem 6” x 3/8” diameter (150 x 9.5 mm); 8847T10 Clamp has male connector; 8847T12 has…

  • Stainless Steel Vertical Base Plate

    Lee Engineering

    For anchoring of 1/2" lattice frame.

  • Zinc Vertical Base Plate

    Lee Engineering

    Vertical anchoring of (1/2") lattice frame.

  • Workstations with Stainless Steel Tops

    Terra Universal

    …scuff protection. All base designs include leveling feet to provide stability. Grounding terminals allow easy connection to your in-house ground, and ground pin connectors located on both the right and left sides of the front frame panel accommodate wrist straps and other static control equipment.

  • Cleanroom Workstations with Static-Dissipative Tops

    Terra Universal

    …connection to your in-house ground, and connectors located on both the right and left sides of the front frame panel accommodate wrist straps and other static control equipment. Like our standard work stations, this station also features a heavy-duty bench frame made of all-welded square tubing.…

  • Lattice Lab System, Set #1

    United Scientific Supplies

    …assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of castalloy. Setup with foot plates secured to a bench. Two-dimensional lattices can be assembled in units of 24 x…

  • Riteflow® PTFE Mounted Flowmeters

    Bel-Art Products

    …anodized aluminum frame that features an exclusive tube-lock to prevent turning during locking. Once in place, the meter will not shift under pressure or vacuum. A special magnifying window runs the entire length of the scale for easy reading of flow measurements. Tubing connectors are rear mounted…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.