Flasks For Evaporators

Compare Tool

Select up to 3 products

Flasks For Evaporators
1 - 32 of 104
Sort
View
Show
  • 500mL Flask, 24/40 Top, 19/22 Bottom

  • The S-EVAP-RB® solvent evaporator for round flasks allows for up to 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using hexane and other approved solvents and concentrating extracted materials from Soxhlet operations. The…

  • …accommodate various flask sizes (250 mL, 500 mL, and 1000 mL). Organomation’s S-EVAP solvent evaporators have a broad range of applications including concentrating extracted materials from Soxhlet operations and other KD evaporation methods. At each sample position, the KD flask rests on the…

  • …suitable for left and tight-handed operators Stepless speed setting with dial control and speed display Speed range: 5 - 300 min-1 Low device voltage (24V) ensures user safety Flask clamping mechanism with integrated push-off function for easy exchange of evaporation flasks

  • Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

  • Ai SolventVap Rotary Evaporators

    Across International

    …ensures safe vacuum operation.  Modular design (individual rotary and water bath modules) for easy future upgrades.  Easy multi-level manual lift with secure lock for the evaporating flask.  Easy, straight-forward visual operation with digital speed and temperature display. …

  • These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

  • …option for either water or oil bath Rotary joint’s locking position is adjustable within 80 mm; especially useful when using varying capacity evaporating flasks or when there is a need to shift the vacuum seal’s contact position (Patent No. 3220033) Evaporation flasks are easily…

  • …vacuum seal suitable up to 2L flasks One touch operation for displaying and saving operating conditions Equipped with lift-up switch in the event of power outage Rotary joint’s locking position is adjustable up to 80 mm; useful when using evaporating flasks with varying capacities or…

  • These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…

  • …vacuum seal suitable up to 2L flasks One touch operation for displaying and saving operating conditions Equipped with lift-up switch in the event of power outage Rotary joint’s locking position is adjustable up to 80 mm; useful when using evaporating flasks with varying capacities or…

  • A Rotary Evaporator designed so you can focus on your research: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Clear digital display showing actual and set values Two separete knobs with dynamic control for setting the rotation speed…

  • …with ambidextrous design, allows for precise positioning of the glassware. Digital displays for rotation speed and heating bath temperature allow for optimal control of all distilling processes. New clamp mechanism to simplify the changing of evaporation flasks. Manual lift with integrated…

  • …modified evaporation single neck flask with a standard taper outer joint. Low profile design sits upright on bench and also provides for easy product access with a spatula. Flask shape is excellent for the controlled evaporation of foaming solvents such as toluene or xylene on a rotary evaporator.

  • …expand the sample size range with an optional large sample holder makes it an ideal instrument for laboratories that will be evaporating up to 6 samples at once and are using a wide range of sample flask outside diameters. The standard instrument fits samples with an outside diameter of 10-30 mm,…

  • Unique 5L Rotary Evaporator design fills the opening between benchtop and industrial evaporators systems. Features a large bath for a 5L flask. Continuous reflux with a 3L receiving flask and a reflux valve and a bottom drain valve for the receiving flask. Motorized lift with push button control.…

  • for manual lifting of the evaporating flask. Included is the selected condenser, 1L receiving and evaporating flasks, and a vapor duct. All accessories are included for out of the box usage. All Models Heating Bath: B-100. Temperature range of 20° to 95°C. Max. evaporating

  • Replacement receiving flask adapters for Buchi rotary evaporators. Joins steam tube to receiving flask. Combi-clip not included.

  • Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

  • Spider evaporators are for use when you need to concentrate several samples under the same conditions. Up to five samples can be concentrated simultaneously using 50 or 100 mL flasks. Up to twenty samples can be concentrated simultaneously using 20 mL cylindrical tubes.

  • …quality evaporation flasks for SolventVap series rotary evaporators. Glass material: high borosilicate glass 3.3. Receiving Flasks Heavy wall, high quality receiving flasks for Ai SolventVap series rotary evaporators. Glass material: high borosilicate glass 3.3. Stainless Steel Flask

  • …Option for 4L or 7L capacity water bath Rotary joint’s locking position feature is adjustable within 80 mm; especially useful when using varying capacity evaporating flasks or when there is a need to shift the vacuum seal’s contact position (Patent No. 3220033) Evaporation flasks

  • Replacement evaporator flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Safety coated.

  • Pear Shaped Glass Recovery Flasks

    United Scientific Supplies

    Heavy wall recovery flasks are ideal for use with rotary evaporators. Flasks feature a square bead and a single neck with ground glass 24/40 joint. Opening at top is designed for easy recovery of reaction products using a spatula. Flask bottom fits standard heating mantles.

  • These corrosion- and leach-resistant flasks are excellent for rotary evaporation and distillation of high-purity chemicals. They are manufactured from PFA (a perfluoroalkoxy polymer) for excellent resistance to heat and chemical contamination, as well as smooth surfaces that greatly simplify…

  • …pistons Suitable for DIN EN 12697-3 (Asphalt test for hot asphalt)   Thomas Nos. 1203C85 and 1203C88 The newly developed product line from IKA® in ergonomic, compact design with innovative functions to improve operating results. Rotary evaporators with integrated heating…

  • …jacket for cooling. Additional joint on the top fo the condenser for flexible expansion. For particularly efficient condensation. Evaporating flask feed via stop-cock. Connection for vapor temperature sensor. Includes BY Vertical Condenser 048177, 1L receiving flask, receiving flask clip, stopcock,…

  • SYNTHWARE Recovery Flasks

    Kemtech America

    SYNTHWARE recovery/evaporating, heavy wall, single neck flask with a standard taper outer joint. Desined for easy recovery of reaction products and for use with rotary evaporators. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • flasks are chemically inert for ultra-pure applications. The neck of each flask is slightly rounded for pouring and can be plugged with a stopper. The conical shape and neck design allow contents to be mixed or stirred with reduced risk of splashing. The narrow neck also helps limit evaporation and…

  • SYNTHWARE round bottom boiling flasks with spherical socket joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness. These flasks can be used as replacements for the collection flask on rotary evaporators.

  • Graduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.

  • Borosilicate glass receiving flask for all large scale rotary evaporators. Available in safety coated or plain glass. Side neck includes a SVL thread vent cap. Bottom inner ball joint includes CAPFE o-ring. Dark amber coated glass version is also available.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.