Flask Brush

For volumetric flasks, with bristle part 1 1/2” diameter and plastic handle Flexibility of curved spring portion to which bristles are attached enables brush to reach all parts of flask

Black nylon monofilament bristles 8 x 1 3/4 inches, on galvanized wire, with hinged joint and wooden handle Can be used in flasks with long necks, 1 3/4” diameter or short neck balloon flasks with 1 1/2” i.d. Total length 23 5 /8”.

These Flask Brushes have natural bristles and a flexible plastic handle. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.

Angled head for scrubbing around bends Plastic handle has no ring Bend to fit difficult-to-clean glassware tabulation and curves Bristle Diameter: 1.5, Total Length: 16"

Stiff 41/2 x 13/4in. brush mounted on a preformed, plastic handle that adapts itself to the curvature of the flask. Overall L: 16 in. Fits through 24/40 joints.

Angled handle fits easily into flask or bottle necks and bends to allow brush to fit container shape. Brushes are mounted on a flexible plastic handle designed for cleaning Erlenmeyer, Filtering, Kjeldahl, Nephelo, Pear-shaped, Round-bottom, Flat-bottom, Reaction, and Volumetric Flasks.

Angled handle fits easily into flask or bottle necks and bends to allow fitting of brush to container shape. Brushes are mounted on a flexible plastic handle, designed for cleaning Erlenmeyer, Filtering, Kjeldahl, Nephelo, Pear-Shaped, Round Bottom, Flat Bottom, Reaction, and Volumetric flasks.

For more thorough cleaning of neck and sides Black nylon monofilament bristles and plastic handle Flexible bristle portion 1 1/2” x 4” long, tufted at both ends. Total length 16 1/2 ”.

Special construction puts the cleaning action where it is needed. The bristles fold flat to fit through the narrow bottle neck, then expand to fill the chamber.

Brush materials resistant to acids, aromatic and aliphatic hydrocarbons, ketones, ethyl acetate esters, trichloroethylene, and hot water. FDA and USDA approved materials.

Allows access to entire inside surface of flasks or BOD bottles Black hog bristle brush 4 1/4” long mounted on a flat steel shank attached to pivoting shaft Brush (12 1/8” long) has bristle diameter of 1 1/2”; brush (16” long) has bristle diameter of 1 …

Specially designed brush folds flat as it enters the glassware, then opens to reach across flask and bottle bottoms for very effective cleaning.

Use this brush to clean any type of deep vessel. Good for restaurant kitchens, laboratories with round-bottom flasks, repair shops, any facility needing dexterity and small size in the cleaning head. Diameter of wooden head: 1.7025 x .8915" and the bristles are 1.578 x.74". Head of brush…

…last up to 10 times longer than most other brushes and up to 20 times longer than most other sponges under normal use Sponge-type brush area Comfortable handles Model 1929M20 is a thin, bendable brush that can reach where hands and conventional brushes can not. It can slip into the narrowest…

…an easy method of removing the majority of desired, dried-on solids from the interior walls of round bottom flasks. Motor driven, the spinning chain rapidly and effectively brushes the surface as the loose solids collect on the bottom. Minimal physical effort is required. Tedious, time-consuming,…

…100ml (1), Evaporating Dish, Porcelain, 35ml (1), Filter Paper, 9cm dia, pk/100 (1), Flask, Boiling, 100ml (1), Flask, Boiling, 250ml (1), Flask, Erlenmeyer, Glass, 250ml (1), Flask, Erlenmeyer, Glass, 500ml (1), Flask, Volumetric, w/stopper,250ml (1), Laboratory Apron (1), Mortar & Pestle, 90mm…

…automatically to user-entered email addresses. Optional 6-Port Tray Dryer Manifold accommodates either 1/2" or 3/4" flask adapters and connect to flasks and other glassware. The optional built-in isolation valve separates the Bulk Tray Dryer from the freeze dryer to shorten time…

…or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum pump (sold separately). They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. …

…serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum pump (sold separately). They also feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. …

…or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum pump (sold separately). They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. …

…or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum pump (sold separately). They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. …

…Freeze Dryers are designed for lyophilizing light sample loads. The compact design is ideal for labs with limited floor space. They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. …

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring…

…and accommodation for a full size tray dryer such as the FreeZone Stoppering Tray Dryer (pump and tray dryer sold separately). They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. A…

…tray dryer sold separately). These models offer a broad range of built-in options including a purge valve and mini chamber. They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. A…

…(pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. A…

…Freeze Dryers are designed for lyophilizing moderate sample loads. The compact design is ideal for labs with limited floor space. They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. A…

…Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. …

…Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. …

…pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryer (pump and tray dryer sold separately). They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. A…

…Freeze Dryers are designed for lyophilizing light sample loads. The compact design is ideal for labs with limited floor space. They feature a brushed stainless steel and glacier white, powder-coated steel exterior, hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. …