Flashing Timer

Compare Tool

Select up to 3 products

Flashing Timer
1 - 16 of 16
Sort
View
Show
  • …is 1 second Accuracy is 0.01% Audible alarm/flashing LED Splash-proof, water-resistant timer is suitable for use in wet labs, wash-down areas, plants and the field. Timer is provided with an individually serial numbered Traceable® certificate from an ISO 17025 calibration…

  • Programmable memory 2-seperate timing channels Adjustable alarm volume Timing range is 99 minutes, 59 seconds Resolution is 1 second; accuracy is 0.01% Size is 3-1/2" x 2-1/4" x 5/8" Weight is 2-1/2 ounces

  • DASH Flex 12 Programmable Digital STAT Centrifuge

    labForce (a Thomas Scientific Brand)

    …status down to the very last second and modify settings on the fly using the digital display and timer. LED lid lights indicate cycle status at a glance (off when ready, on when running, flashing when done) to drive down turnaround time in even the busiest labs. Program and save up to 10 custom…

  • Continuous Alarm Timer

    Sper Scientific

    A bright flashing yellow LED visual alarm or an audible alarm Will flash or sound continuously for weeks until shut off Counts time elapsed after the alarm N.I.S.T. traceable certificate of compliance available: 1225A44

  • Timer, 8-Channel

    Thomas®

    …indicated on 13-mm-high LED readout in hours and minutes or minutes and seconds, depending on mode Each channel has distinct alarm and flashing signal on completion of program Functions and alarms for seven timing channels summarized below. Stopwatch channel can be used for timing…

  • Visual Alarm Timer

    Sper Scientific

    Select a bright flashing yellow LED or an audible alarm Counts time elapsed after the alarm N.I.S.T. traceable certificate of compliance available: 1225A36, 1225A38 and 1225A40

  • Flashing LED indicator 2-seperate timing channels Automatic programmable memory Two channel timing range is 99 hours, 59 minutes, 59 seconds Resolution is 1 second; accuracy is 0.01% Size is 3-1/2" x 3" x 5/8"; weight is 3 ounces

  • Innovative countdown timer vibrates when time is up. Quietly nudges you during a meeting or perfect for loud environments when hearing a buzzer is impossible. Three Alarm Modes: Audible, Flashing, and Vibrating Countdown and alarms on single channel Automatic Bounceback™ Memory…

  • …reset Integrated magnet and clip Thomas timer counts down from 9999 minutes in one-minute increments. It has a countdown resolution of 1 second for times below 99 minutes.  Users can select an audible alarm or a bright flashing LED visual alarm with the flip of a switch. Automatic…

  • Digital Timer, FT24

    Cooper-Atkins

    …capability Adjustable volume alarm Bright red, flashing light; can be used w/o sound to signal end of cycle Unique start/stop button for easy access Unit counts down in second increments. Loud alarm and flashing light command attention. Memory feature automatically repeats…

  • …exceeded and shaking motion or temperature is halted. Each type of alarm has separate flashing displays. Variable speed control over 15 to 500 rpm. The built-in memory maintains set points, and the display flashes to indicate an interruption. Shaker features a LEXAN bubble window; when the hood is…

  • …135mm round top DIGITAL hot plate stirrer system with built in timer. Hotplates feature many exclusive features and improved safety enhancements. The 135mm diameter heater top is scratch proof and chemically resistant. The integrated TIMER provides an additional layer of safety ensuring the hotplate…

  • …user selected temperature StirTrac technology with superb magnetic coupling provides smooth slow speed stirring and rapid braking. Walk away timer shuts off heating, stirring or both after preset userdefined interval Integrated ring stand, single knob design and RS232 output Safety…

  • …The user may select the acceptable temperature parameters (high and low temperature values) in 1° increments. The cumulative alarm duration timer is started each time the reading is outside of the acceptable temperature parameters to provide a total excursion time since the start of recording.…

  • …and accurate results every time and is easily visible from outside fume hoods or across lab benches. Shows set-point and actual temperatures. Timer will display elapsed time or when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings,…

  • …The user may select the acceptable temperature parameters (high and low temperature values) in 1° increments.1 The cumulative alarm duration timer is started each time the reading is outside of the acceptable temperature parameters to provide a total excursion time since the start of recording.…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.