Filtration Flask

…as steel or rubber to minimize contamination of filtrate. The 300mL graduated funnel mounts on the 1L flask by way of a 40/35 ground glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum…

…irradiated Filtration tops fit on 45mm neck bottles 45mm neck size The Denville 250ml, and 500ml Vacuum Filtration Flasks are ideal for separation and purification of your samples. Membrane material includes PES and PVDF in .22µm and .45µm. Our flasks have a wide bottle…

…Flasks shape is designed to impart maximum mechanical strength. They are blown in special molds to withstand the demands of the modern laboratory. The neck finish is developed for strength and to ensure a proper stopper fitting. Avail. in 50mL to 20 L capacity. 10L and 20L Flasks are in…

…strength needed for vacuum filtration Side-arm accepts standard 1/4" (6mm) i.d. tubing for connection to vacuum sources. A second flask should be connected between the filtering flask and the vacuum source to prevent accidental entry of the filtrate into the vacuum line or pump.…

Millipore Glass Vacuum Filtration Accessory ProductGround Joint Flask, 4LThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore All-Glass Filter Holders…

Millipore Glass Vacuum Filtration Accessory ProductGround Joint Flask, 1LThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore All-Glass Filter Holders…

Millipore Glass Vacuum Filtration Accessory ProductGround Joint Flask, 5L, Conical bottomThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore All-Glass…

…on funnel top and funnel stem.Includes: Funnel top, funnel stem/membrane support, aluminum clamp, stopper (except standard taper units) and filtration flask (where indicated).For replacement parts, visit our online glassware catalog at www.sigma-aldrich.com Legal Information: Sigma-Aldrich is…

…on funnel top and funnel stem.Includes: Funnel top, funnel stem/membrane support, aluminum clamp, stopper (except standard taper units) and filtration flask (where indicated).For replacement parts, visit our online glassware catalog at www.sigma-aldrich.com Legal Information: Sigma-Aldrich is…

…with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent purification,…

…steel or rubber to minimize contamination of filtrate. The 15mL filtration funnel mounts on the 250mL filter flask using a 19/22 ground glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the…

Borosilicate glass filtration apparatus accomodates 75mm membrane filters. The new design utilizes a PTFE Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…

Borosilicate glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…

Borosilicate glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy to…

…filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and l liter filtering flask.

Filtration apparatus assembly. This apparatus differs from the standard units as it utilizes our Instatherm technology to evenly heat the upper 500mL filter funnel, thus keeping the viscous material such as polymers in the liquid state. The middle adapter and snap ring are PTFE. The interchangeable…

This Filtration Kit allows rapid separation of mixtures via vacuum filtration. The stopper is cut to hold a Buchner funnel. The hand-operated vacuum pump simplifies vacuum filtration, eliminating the need for a water source or vacuum aspirator. It is more economical than an electric vacuum pump. The…

…HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has removable 47mm stainless steel support screen for use with viscous or proteinaceous solutions. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and 1 liter filtering flask.

…1L flask by a No.8 silicone stopper. The P/FC2 couples to a 40/35 male taper on extraction manifold or 1L flask. The anodized aluminum clamp secures the 47mm membrane between the 300mL graduated funnel and base. While the sintered glass frit support base can be used for general filtration, the…

…easy-grip flask design and balanced profile improve stability during filtration in tight laminar flow hoods, and the convenient labeling and packaging make it easy to open and track each device. The bottom of the receiver flask is slightly recessed, so you can conveniently stack capped flasks after…

…easy-grip flask design and balanced profile improve stability during filtration in tight laminar flow hoods, and the convenient labeling and packaging make it easy to open and track each device. The bottom of the receiver flask is slightly recessed, so you can conveniently stack capped flasks after…

In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

…revolutionize their solvent filtration, labForce offers hands-free hardware that allows for filtration without any need for supervision. Choose from the bench-top Vacuum Filtration Pedestal or the adjustable-height Vacuum Filtration Cradle Ring. labForce Solvent Filtration Bottle Top Filters…

For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

Filtration apparatus for 75mm OD membranes or filter paper. Ideal for solvent recycling and other filter applications. All threaded apparatus eliminates need for clamps. Course glass fritted disc is interchangable. Gl80 wide mouth bottle with #15 Ace-Safe connector for vacuum connection on side.…

…sturdy construction, this 10L bottle/flask is perfect for filtering large volumes of liquid. The thick walls and design enables this flask to withstand vacuum filtration without imploding. Graduated in 1000mL increments on a scale from 2000mL to 8000mL with an accuracy of +/- 5%. Neck size fits a…

… Each apparatus is supplied with 1000 mL funnel, 90 mm glass support base, 40-60 micron porosity fritted glass disc, anodized aluminum clamp and filtration flask Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

… Each apparatus is supplied with 1000 mL funnel, 90 mm glass support base, 40-60 micron porosity fritted glass disc, anodized aluminum clamp and filtration flask Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

This borosilicate glass heavy wall filtering flask can be used with FILTERWARE® Filtration Apparatus (LG-1755). Supplied with a silicone stopper with 9/16" hole and a #2 hose connection, the 4000mL flask has 1/2" connections.

Ideal for HPLC solvent/sample filtrate recovery, as well as filtration of corrosive liquids for particulate contamination analysis The flask and fritted glass base are joined with a Standard Taper 40/35 ground joint, so liquids will only come in contact with borosilicate glass Vacuum…