Filtering Flask Tubes

Compare Tool

Select up to 3 products

Filtering Flask Tubes
1 - 32 of 69
Sort
View
Show
  • Polypropylene Filtering Flasks

    Thermo Scientific Nalgene

    Polypropylene flasks are molded in one piece to withstand full vacuum to 30" Hg Oval marking area Autoclavable Tubulation at 45° angle prevents tipping. Barbed adapter accepts 1/4" to 3/8" I. D. tubing

  • KimCote® Filtering Flasks

    DWK Life Sciences (Kimble)

    … All flasks have a side arm for connection to 3/8” (6 mm) ID flexible tubing Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements A second flask should be connected between the filtering flask and the…

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    This Filteration Kit allows you to quickly separate suspensions and mixtures using vacuum filtration. Included is a 500ml Borosilicate Filtering Flask, Vacuum Pump, Porcelain Buchner Funnell, 9cm filter paper, connection tubing, and a rubber stopper. The stopper hole is specially cut to hold the…

  • PYREX Heavy Wall Filtering Flasks

    Corning

    Heavy walls Graduated Replaceable tube These PYREX heavy wall flasks have a seated bent, removable plastic tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber. For convenience, the flasks are graduated to show approximate capacity. The neck finish…

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

  • Scienceware® Filtering Flask with Side Arm

    Bel-Art - SP Scienceware

    These flasks, also called vacuum flasks, have a side-arm with a 45° downward angle to prevent tipping.   Reduce broken glassware with this flask constructed of FDA grade polypropylene Side Arm accepts flexible tubing from 3/8" to 1/2" I.D. 1000 ml capacity

  • PYREX Vacuum Filter Flask

    Corning

    For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

  • KIMAX Graduated Filtering Flasks with Detachable Plastic Sidearms

    DWK Life Sciences (Kimble)

    …5/16" ID flexible tubing (US Patent 3,268,300) Sidearm has two ears to provide a finger grip for easy insertion into a neoprene grommet by turning the plastic piece Opening in the sidearm is larger at the flask end to hold a cotton plug securely All flasks have durable white ceramic…

  • Whatman SF 100 Suction Flask

    GE Healthcare

    SF 100 Suction Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories SF 100 Suction Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories

  • Whatman WT 100 Witt's Flask

    GE Healthcare

    WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. The bottle is made…

  • Graduated Filtering Flasks with Quick-Release Hose Barb Connectors

    DWK Life Sciences (Kimble)

    KIMAX® heavy wall filter flasks have a quick-release connector designed as a safety feature Hose barb accommodates 1/4 inch ID tubing Tubing can remain permanently attached since the opposite end is designed to be easily assembled via a positive threaded seal Proper positioning of…

  • PYREXPLUS® Filter Flask

    Corning

    …PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).

  • SYNTHWARE Filter Flasks

    Kemtech America

    SYNTHWARE filter flask with standard taper outer joint and 10mm O.D. hose connection. All sizes are blown from tubing to ensure heavy and uniform wall.

  • KIMAX Heavy Wall Filter Flasks

    DWK Life Sciences (Kimble)

    Heavy glass with side tubulation for tubing Sizes 25 mL through 4000 mL Designed from Federal Specifications NNN-F-240 Scale indicates approximate volumes Flasks are fabricated from molded heavy wall for strength and have a beaded bottom surface that prevents scratching and slippage…

  • Spinner Flask

    Corning

    …a 25mm diameter vent filter with a 0.2µm pore PVDF membrane and a barbed fitting The liquid transfer port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4 inch OD C-Flex tubing ending in a male luer…

  • Polycarbonate Sterile Erlenmeyer Flask with Dip Tube

    Corning

    …transfer caps have two ports. One port ends in a 0.2 µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a male Luer lock. The dip tube reaches all the way to the bottom of the flask for easy aseptic transfer of your liquid handling processes.

  • Aldrich® filter flask capacity 1000 mL, stopcock for 3-way

    MilliporeSigma

    Synonym: filter flask, filter flasks, filtering flasks, flask filter General description 1,000 mL, with 3-way glass stopcock. Allows waste solvent to be drained from flask via stopcock without disassembly, thus minimizing breakage. Use with NMR tube cleaners, Gooch crucibles, and Buchner…

  • Filtration Assemblies & Flask

    DWK Life Sciences (Kimble)

    …i.d. tubing for connection to vacuum sources. A second flask should be connected between the filtering flask and the vacuum source to prevent accidental entry of the filtrate into the vacuum line or pump. ULTRA-WARE® Filtering Flask with Rubber Stopper Joint (1173F68) This flask is…

  • Aspirator with Trap Flask

    Grant Instruments

    …connected with polyethylene tube to the trapping flask. Liquid is removed from the microtest tube when the collecting tip touches the solution surface. A tube holder-organiser is conveniently located on the right hand side of the FTA-1. This can accommodate two tubes e.g. one for a hydrochloric…

  • Polycap As Nylon Membrane Capsule Filters

    GE Healthcare

    …risk when filtering into a bottle, flask or other container. Inlet and outlet fittings are 1/2" (3/8" to 1/2" tubing) or 1/4" (1/4" to 3/8" tubing) step barb (SB), except 4651B03, B17 and B21 which have 1/4" Male National Pipe Thread (MNPT) inlet fittings. Filters are sold individually.…

  • Economy Single Tube Solvent Jet Washer/Cleaner

    Wilmad-LabGlass - SP Scienceware

    …washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks are ordered…

  • Neoprene Filter Adapters

    Chemglass

    Neoprene filter adapters are designed to fit between a filtering funnel and a flask. For use with Buchner funnels, Gooch crucibles, filter tubes, etc. Can be used individually or nested with adjacent sizes. Eliminates the boring of rubber stoppers and the difficulties of inserting and removing glass…

  • Filter Tubes, Allihn

    Chemglass

    Allihn type filter tube with a 30mm O.D. disc. Height above the disc is 100mm, lower stem is 8mm O.D. x 55mm in length.

  • 1PS Phase Separator Papers

    GE Healthcare

    …when carrying out a large number of routine solvent extractions at the same time. Samples can be shaken with solvent in stoppered conical flasks or test tubes and transferred directly to funnels containing 1PS. Unsupervised separation A chief benefit of the 1PS method is that cut-off…

  • NMR Tube Cleaner, Wong

    Chemglass

    …Lower joint is a 24/40 inner, and the hose connection has an O.D. of 8.5mm at the middle serration. Complete unit comes with an NMR tube washer and 250mL heavy wall filter flask. NOTE: FOR USE WITH 5mm O.D. x 7in TUBES ONLY. **Designed and developed by Dr. Jessie Wong, Schering Plough Research

  • Filter Flask, Safety Coated

    DWK Life Sciences (Wheaton)

    Glass components manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Flasks have a #2 hose connection for 1/4 (6mm) I.D. tubing Plastic coated for safety Not Graduated No. 8 Stopper opening

  • Flask Reaction, with O-Ring Groove, Fritted Disc

    Ace Glass

    Cylindrical, heavy-wall reaction flask with an integral fritted disc. Flask has flat flange top with an o-ring groove. For heads see 6528, 6529 and 6530 series. Can be used with 6517 quick clamp or two piece clamp. Bottom outlet tube.

  • Polysulfone Vacuum Filter Holders

    Advantec MFS

    47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • PYREX® Brand Fluted Funnels, Short Stem

    Corning

    Inside flutings for rapid filtration For use in flasks or test tubes without filter rack

  • Universal Solvent Jet NMR Tube Washer

    Wilmad-LabGlass - SP Scienceware

    …sample tube is adjusted to the proper length. The washer head is then affixed to a filter flask (with vacuum sidearm) and the side tubing is inserted into a washing solvent reservoir. After an inverted sample tube is placed over the PTFE tubing, a vacuum is applied to the flask, sample tube is…

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    …diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also accepts syringe filters. Tubing adapter can be…

  • 47mm Sterility Test Filter Holder

    Advantec MFS

    …Silicone cover, KS13 filter holder with injector needle, PTFE stopcock, and 1/4"ID silicone tubing(21"L). The anodized aluminum clamp secures the membrane between the funnel and sintered glass frit base. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup.…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.