Filter Paper Borosilicate

Compare Tool

Select up to 3 products

Filter Paper Borosilicate
1 - 32 of 51
Sort
View
Show
  • GF/A Borosilicate Glass Microfiber Filters

    GE Healthcare

    … Most widely used in biochemistry for filtration of precipitated proteins Withstands temperatures to 500°C Attains much higher counting efficiencies compared with cellulose papers; borosilicate glass without binders Widely used for reliable results in air pollution analysis

  • GF/D Borosilicate Glass Microfiber Filters

    GE Healthcare

    …speed; ten times more rapid than the fastest comparable retention cellulose filter paper Withstands temperature to 500°C Designed as a membrane pre-filter, with sizes to fit most holders Used for sample collecting and testing in clinical screening; borosilicate glass without binders

  • Grade GF/F Glass Microfiber Filters, Binder Free

    GE Healthcare

    Whatman Grade GF/F filter from GE Healthcare’s Life Sciences business is manufactured from pure borosilicate glass. GF/F offers very fine particle retention and good loading capacity and flow rate. 0.7 µm nominal particle retention Served as the basis filter for EPA standard…

  • Whatman Multigrade 150 Glass Fiber Filters

    GE Healthcare

    borosilicate glass, binder-freeExtends life of final filter membraneGE’s Whatman GMF 150 prefilters are multilayer graded density filters for rapid and efficient filtration of samples with high solids content. Multilayer filter design When a sample is applied, the multigrade glass filter traps…

  • GF/B Borosilicate Glass Microfiber Filter Discs

    GE Healthcare

    …particles to 1.0 µm Extremely high flow rate; filtration takes place both vertically and laterally through the filters High loading capacity, which continues to filter efficiently for a greater extended period Highly resistant to chemical attack; absence of binders ensures that…

  • 934-AH™ Borosilicate Glass Microfiber Filters

    GE Healthcare

    …particles to 1.5 µm Extremely high flow rate; filtration takes place both vertically and laterally through the filters High loading capacity, which continues to filter efficiently for a greater extended period Highly resistant to chemical attack; absence of binders ensures that…

  • Whatman Grade EPM 2000 Air Sampling Filter

    GE Healthcare

    …from 100% pure borosilicate glass, they enable detailed chemical analysis of trace pollutants with minimal interference. Whatman EPM 2000 PM-10 air sampler filter sizes EPM 2000 from GE Healthcare’s Life Sciences business is available as 100-piece packs of either 47 mm filter paper circles or 8 ×…

  • Acid Treated, Low Metal TCLP Filters

    GE Healthcare

    Binder-free, borosilicate glass microfiber Filters are designed to determine the leaching potential in a landfill for hazardous organic and inorganic contaminants that could potentially migrate into groundwater and drinking water sources. Particle retention rating of 0.6 to 0.8…

  • TSS Glass Fiber Filters

    Hach

    TSS Filters are recommended for use in Standard Methods 2540 C and 2540 D. Optimized surface characteristics of this binderless borosilicate glass microfiber filter eliminates pin-holing and fiber-shedding to ensure consistent, accurate results comparable to 934-AH® brand filters. Fast flow…

  • Whatman Grade 934-AH Glass Microfiber Filters, Binder Free

    GE Healthcare

    …Grade 934-AH borosilicate glass microfiber filters from GE are smooth water quality filters with high retention efficiency. Grade 934-AH filters are often used in total suspended solids analysis. Grade 934-AH: 1.5 µm Discover other binder-free Whatman glass microfiber filters from GE …

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    This Filteration Kit allows you to quickly separate suspensions and mixtures using vacuum filtration. Included is a 500ml Borosilicate Filtering Flask, Vacuum Pump, Porcelain Buchner Funnell, 9cm filter paper, connection tubing, and a rubber stopper. The stopper hole is specially cut to hold the…

  • Buchner Filter Funnels

    Wilmad LabGlass

    WUsed in applications where filter paper would be attacked by the material being filtered, these borosilicate glass Buchner filter funnels with sealed-in fritted glass discs are available in Coarse(C), Medium(M), or Fine(F) porosities.

  • Glass Fiber Filters

    Sartorius

    Depth filters with high particle loading capacity. Made of 100% borosilicate. Temperature resistant up to 500 °C. Typically placed directly on top of other membrane filters to act as a prefilter; or may be used to filter solutions directly.

  • Fast-Freeze Borosilicate Glass Flasks

    Labconco

    …freeze-dry apparatus Flexible silicone rubber caps, which are placed over adapters in central port of cap to prevent loss of solids and cross-contamination Requires adapter for attachment to valves Comes complete with rubber top, glass bottom and a supply of filter paper and retainer rings

  • Glass Microfiber Filters

    Ahlstrom

    …analytical papers with similar particle retention. Widely used as a depth type pre-filter ahead of final membrane filters. Sometimes used in combination with grade 121 as a graded porosity protective and retentive pre-filter for highly-efficient protection of membrane filters. GRADE 131…

  • Grade F Glass Microfiber Filters

    Thomas®

    …used with Grade D to filter diluted aqueous solutions containing strong oxidizing, acidic, or alkaline components prior to laser spectroscopy. May also be used for TCLP analysis and collecting extremely fine precipitated proteins, including immunoglobulins. Binderless borosilicate glass microfiber. …

  • Filter Papers for TCLP

    Ahlstrom

    …TCLP Filter This grade has similar performance properties to Grade 151 and is made with acid-treated borosilicate glass microfibers with inherently low levels of barium and zinc. The filter media contains no binders or other additives that may cause interference with samples. The filters resist…

  • XenoMax Washed, Dried TSS Filter

    Applied Separations

    …fast flowing, fine porosity borosilicate glass microfiber filters have been optimized for better wet strength/handleability and high temperature (550°C) blank stability; two quality issues known to affect other brands of TSS filters. Xenomax TSSFVS Filters are readily available in the…

  • Filter Paper, TCLP Grade Acid Treated

    Thomas®

    …microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are smooth…

  • Funnel Filter Buchner Fritted Medium 2000ml

    DWK Life Sciences (Kimble)

    This Buchner KIMAX® funnel is used wherever filter paper and membranes cannot withstand the chemical attack of the filtrate. Funnels are constructed with heavy-walled stems, and top rims are beaded for extra strength With a marking spot With KIMFLOW® fritted disc …

  • Grade 934-Ah Glass Microfiber Filters

    Thomas®

    …applications and RIA scintillation counting. Binderless borosilicate glass microfiber enables use up to 550°C. Particle Retention: 1.50 µm Filtration Speed: 47 seconds Thickness: 0.43 mm Basis Weight: 64 g/m 2 Depth filtration categorizes filter media that traps particulate within the random…

  • Glass Microfiber Filters

    Sartorius

    Depth filters with high particle loading capacity. Made of 100% borosilicate. Temperature resistant up to 500 °C. Typically placed directly on top of other membrane filters to act as a prefilter; or may be used to filter solutions directly.

  • Grade A Glass Microfiber Filters

    Thomas®

    …of precipitated proteins and cells. Ideally suited for use as a filter for radioimmuno assay of weak beta emitters by scintillation counting and gravimetric determination of airborne particulate. Binderless borosilicate glass micro fiber. Particle retention: 1.60 µm Filtration…

  • Grade C Glass Microfiber Filters

    Thomas®

    …used for RIA procedures and harvesting lymphocytes. Binderless borosilicate glass microfiber. Particle retention: 1.20 µm Filtration speed: 25 seconds Thickness: 0.28 mm Basis weight: 50 g/m 2 Depth filtration categorizes filter media that traps particulate within the random matrix of fibers…

  • Grade A-E Glass Microfiber Filters

    Thomas®

    …Binderless borosilicate glass microfiber. DOP efficiency is 99.98%. Primarily used in suspended solids and air monitoring. Particle retention: 1.00 µm Filtration speed: 15 seconds Thickness: 0.33 mm Basis weight: 60 g/m 2 Depth filtration categorizes filter media that…

  • Grade B Glass Microfiber Filters

    Thomas®

    …also be used as a solid particulate filter for gasses or as a prefilter. Binderless borosilicate glass microfiber. Particle retention: 1.00 µm Filtration speed: 30 seconds Thickness: 0.65 mm Basis weight: 140 g/m 2 Depth filtration categorizes filter media that traps particulate within the…

  • Thomas Grade E Glass Microfiber Filters

    Thomas®

    …and air monitoring applications. Binderless borosilicate glass microfiber. Particle retention: 1.30 µm Filtration speed: 12 seconds Thickness: 0.35 mm Basis weight: 70 g/m 2 Depth filtration categorizes filter media that traps particulate within the random…

  • Thomas Grade D Glass Microfiber Filters

    Thomas®

    filtering. Also ideally used as a general pre-filter to extend primary filter life. Binderless borosilicate glass microfiber. Particle retention: 2.70 µm Filtration speed: 5 seconds Thickness: 0.60 mm Basis weight: 120 g/m 2 Depth filtration categorizes filter media…

  • 2000 ml Fast-Freeze Flask Bottom

    Labconco

    borosilicate glass bottom withstands extreme temperatures and high vacuum. Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. A complete Fast-Freeze Flask consists a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper

  • 300 ml Fast-Freeze Flask Bottom

    Labconco

    …consists a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately as replacement components. Adapters are available in borosilicate glass or stainless steel Replacement borosilicate glass bottom withstands extreme temperatures and…

  • 600 ml Fast-Freeze Flask Bottom

    Labconco

    … Made of borosilicate glass 600 mL Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. A complete Fast-Freeze Flask consists a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately…

  • 150 ml Fast-Freeze Flask Bottom

    Labconco

    … Made of borosilicate glass 150 mL Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. A complete Fast-Freeze Flask consists a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.