Filter Holder

Compare Tool

Select up to 3 products

Filter Holder
1 - 32 of 159
Sort
View
Show
  • Polypropylene In-Line Filter Holder

    Advantec MFS

    Thermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…

  • Roby 25 Filters For Automation

    GE Healthcare

    …wide range of ready-to-use filter holders fitted with a variety of membrane filters are available. For difficult to filter samples see the range of filter holders with membrane and integral glass fiber prefilters or glass fiber filters only. Filter housing is made from polypropylene.…

  • Sanitary Pressure Filter Holders, Stainless Steel

    Advantec MFS

    …90mm, 142mm, 293mm Filter Diameters Available in Type 304ss and 316ss Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough cleaning. Clean holder design minimizes…

  • Whatman Pop-Top and Swin-Lok Plastic Filter Holders

    GE Healthcare

    Filter holders designed for microfiltration and ultra cleaning of small volumes of liquids using positive pressure. Designed for microfiltration and ultra cleaning of small volumes of liquids using positive pressure. All three holders will accommodate Nuclepore track-etched and cast membranes. …

  • Whatman Syringe Type Holders

    GE Healthcare

    Membrane holder, stainless steel syringe filter type Membrane holder, stainless steel syringe filter type Available in stainless steel and polypropylene with luer fittings for use with a standard syringe. The holders are designed for the quick and easy clarification, sterilization, and removal of…

  • In-Line Filter Holder

    Pall Life Sciences

    Lightweight Filter Holder for Particulate Sampling Domed inlet provides uniform sample distribution on the filter Delrin plastic offers broad chemical compatibility and material strength Accepts 25mm filter discs Lightweight for venting and air monitoring applications

  • Whatman Vacuum Type Glass Holders

    GE Healthcare

    Membrane holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Membrane holder produced from borosilicate glass, suitable for aqueous and organic solvent filtration. Vacuum type glass holders Produced from borosilicate glass and available with a choice of…

  • Polysulfone Vacuum Filter Holders

    Advantec MFS

    47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc,…

  • GE Filter Holder

    GVS Filter Technology

    …47 mm sizes Autoclavable Filter holders can also be used for aseptic sampling of liquids or gases at point-of-use or when samples must be collected and analyzed on site. The 25 mm filter is used to filter up to 50 mL of sample and the 47 mm filter can filter up to one liter depending on the…

  • Polysulfone Bottle-Top Filter Holders

    Thermo Scientific Nalgene

    …top filter with the ability to re-use the filter housing Nalgene 320 Autoclavable Securely screws onto glass media bottles* with 33 mm or 45 mm neck sizes Deep screw threads attach directly to bottle allowing convenient filling and vacuum filtration without holding filter to bottle…

  • Filter Holder Accessories

    Sartorius

    Accessories for Sartorius Brand Filter Holders.

  • Pressure Filter Holders with Reservoir, Stainless Steel

    Advantec MFS

    Reservoir elliminates the need for a pressure vessel Filter small batches of liquid Available in type 304ss or 316ss These quality stainless steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for…

  • Sanitary In-Line Filter Holders, Stainless Steel

    Advantec MFS

    …filtration Advantec Sanitary In-Line Holders feature non-threaded inlet and outlet connections that can be completely disassembled for thorough cleaning. Dual sealing system compresses filter to ensure no lateral wicking. The 47mm holder has a vent to allow air venting on upstream side…

  • Chemically Resistant PFA In-Line Filter Holders

    Advantec MFS

    Filter acids, alkalis, or organic solvents Dual support screens allow flow in either direction Perfluoroalkoxy(PFA) polymer is very similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow…

  • Vacuum-Type Glass Membrane Holders

    GE Healthcare

    For general purpose vacuum filtration Borosilicate glass funnel body and stem are attached securely by quick-action spring clamp of anodized aluminum Easily disassembled for loading, cleaning and autoclaving Include single-hole silicone rubber stopper

  • XX4304700

    MilliporeSigma

    Ultraclean liquids or gases in-line by pressure filtration. Open for filter change without disturbing attached plumbing. Polypropylene filter holder with stepped hose connector at both ends for easy installation

  • GF/D Borosilicate Glass Microfiber Filters

    GE Healthcare

    …Extremely high speed; ten times more rapid than the fastest comparable retention cellulose filter paper Withstands temperature to 500°C Designed as a membrane pre-filter, with sizes to fit most holders Used for sample collecting and testing in clinical screening; borosilicate glass…

  • Whatman Sterile Cellulose Nitrate Membrane Filters

    GE Healthcare

    … Most membranes are inherently brittle and difficult to handle; some may be damaged as they are loaded into holders or during standard use. Whatman cellulose nitrate membrane filters are designed to tolerate rough handling. Low extractable level minimizes sample contamination Pharmaceutical,…

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …steel, or PTFE support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the…

  • Whatman Vacuum-Type Glass Membrane Holder, glass reservoir

    GE Healthcare

    Vacuum-Type Glass Membrane Holder, glass reservoir, 47 mm, 300 ml volume, membrane filter accessories Vacuum-Type Glass Membrane Holder, glass reservoir, 47 mm, 300 ml volume, membrane filter accessories

  • Polypropylene Syringe Filter Holder

    Advantec MFS

    Thermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…

  • Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …sterile membrane filters. Also applicable for analysis of suspended solids in water using 47mm depth filters. Complete set includes a borosilicate glass funnel and base., anodized aluminum spring clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm,…

  • Whatman Grade GF/D Glass Microfiber Filters, Binder Free

    GE Healthcare

    GE’s Whatman Grade GF/D fine membrane filters are thick and offer good loading capacity. GF/D can also function as a prefilter when used with GF/B, and it comes in many sizes to fit most filter holders. Thick filter media for increased loading capacity Nominal particle retention of 2.7 µm Can…

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

  • Microanalysis Vacuum Filter Holder Set, Stainless

    United Scientific Supplies

    …a vacuum filter. Includes a stainless steel filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters

  • Microanalysis Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    …a vacuum filter. Includes a fritted glass filter support and No. 5 perforated silicone stopper for easy attachment to a vacuum filtering flask. Membrane filters are not included. Thick prefilters or laminated filters will not seal in this holder and it is not autoclavable with membrane filters

  • Whatman GV 025 Series Glass Vacuum Filtration Device

    GE Healthcare

    …solutions.Autoclavable and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 025 Series GV 025/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories GE Healthcare offers a choice of Whatman holders for use with membrane filters.

  • Whatman GV 100 Series Glass Vacuum Filtration Device

    GE Healthcare

    …solutions.Autoclavable and can be sterilized in dry heat to 180°C.Can be used up to 200°C.GV 100 Series GV 100/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories GE Healthcare offers a choice of Whatman holders for use with membrane filters.

  • Membrane Circles, Cellulose Nitrate, White Plain, 0.45mm 90mm

    GE Healthcare

    … Most membranes are inherently brittle and difficult to handle; it is not uncommon for filters to be damaged during loading into holders or while in use. Whatman cellulose nitrate membrane filters have a noticeably improved flexibility and are made to tolerate abuse during handling, loading,…

  • Filter Holder Manifolds

    MilliporeSigma

    …steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at each station for independent operation. Use vent ports on each stainless manifold station to attach Swinnex filter holders or…

  • Multi-Media Pressure Filter Holders, Stainless Steel

    Advantec MFS

    …media thickness, including pads Multiple layers of media can be used without lateral wicking Unlike standard holders, the Multi-Media Pressure Sealing Filter Holder has a dual sealing system which allows the use of a broad range of media thickness, including pads. This enhanced pressure…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.