Ferrule Tools

Compare Tool

Select up to 3 products

Ferrule Tools
1 - 32 of 74
Sort
View
Show
  • Ferrule Tools

    Agilent Technologies

    Ferrule Tools Tools are designed to remove ferrules stuck inside fittings. Screw the stainless steel ferrule tool into the ferrule and pull it out. Use the smaller capillary ferrule tool for capillary column ferrules (0.32 mm ID column and smaller). The megabore ferrule tool is for megabore…

  • Split Ferrule

    PerkinElmer

    Included in DMA 7/DMA 7e Large Adjustable 3-Point/4-Point Bending Kit (P/N N5390478)

  • The tapered tools in this kit have teeth designed to grip and remove fused silica adaptor ferrules that have become stuck in the fitting detail. Each kit has two tools: one for removing 1/32-inch adaptor ferrules and one for removing 1/16-inch adaptor ferrules.

  • 1/16 Ferrule St

    PerkinElmer

    1/16 Ferrule St

  • 1/16in Tefzel Reverse Ferrule

  • Requires Tip Kit P/N N0690676 for ICP-OES and P/N N8120515 for ICP-MS

  • PerkinElmer offers a variety of stainless steel, titanium and polymer based nuts, ferrules, unions and tubing for plumbing the components of your LC system.

  • …and precise glass lined bore Supplied with 15% Graphite 85% Vespel® ferrules 100% graphite ferrules available separately Packs contain 1 mini union, 2 nuts and 5 ferrules (103431 supplied with ferrules for 0.1-0.25mm ID columns. 103432 supplied with ferrules for 0.32mm ID columns.)

  • A great tool for cleaning detector jets or removing stuck ferrules from other small orifices. Serrated design is optimal for removing silica deposits and other contaminants.

  • Fingertight Nut Spare Part for Series 200 Autosampler, Pkg. 2.

  • 1/8in Stainless Steel Ferrule for Inlet tubing

  • Rheodyne Nut and Ferrule Kit, 1/16in

  • RheoFlex PEEK Nut and Ferrule Set, Pkg. 10

  • PerkinElmer offers a variety of stainless steel, titanium and polymer based nuts, ferrules, unions and tubing for plumbing the components of your LC system.

  • Back Ferrule for 1.6mm o.d. tubing (P/N B0029792)

  • Front Ferrule for 1.6mm o.d. tubing (P/N B0029792)

  • PerkinElmer offers a variety of stainless steel, titanium and polymer based nuts, ferrules, unions and tubing for plumbing the components of your LC system.

  • PerkinElmer offers a variety of stainless steel, titanium and polymer based nuts, ferrules, unions and tubing for plumbing the components of your LC system.

  • PerkinElmer offers a variety of stainless steel, titanium andpolymer based nuts, ferrules, unions and tubing for plumbing thecomponents of your LC system.

  • NUTS AND FERRULES 1/16 (PAIR)

  • …psi (600+ bar)—no tools needed! For a reliable 20,000+ psi (1,400+ bar) UHPLC connection with either fitting style, simply wrench-tighten an extra 1/4 to 1/2 turn. EXP ferrules should only be used with genuine EXP nuts. When used with an EXP nut, the EXP ferrule provides repeated ZDV (zero…

  • PerkinElmer offers a variety of stainless steel, titanium and polymer based nuts, ferrules, unions and tubing for plumbing the components of your LC system.

  • Split/Splitless Injection Port Kit

    Agilent Technologies

    …non-deactivated, 3 each Column ferrule installation tool Blanking plug, finger-tight style, 2 each Washers, 0.375 OD, 12/pk Liner, splitless, single-taper, glass wool, deactivated, 3 each Ferrule, Graphite 530 µm, 1.0 mm ID, 10/pk Ferrule, graphite 320 µm, 0.5 mm ID,…

  • Quickswap Ms Interface Restrictors

    Agilent Technologies

    … These restrictors are prefabricated for convenience and ease of use. For applications requiring other restrictor sizes, Agilent offers a wide variety of deactivated fused silica tubing, SilTite ferrules and swaging tools. This product is only available to U.S. Domestic Customers.

  • Requires Tip Kit P/N N0690676 for ICP-OES and P/N N8120515 for ICP-MS

  • …for use with injection solvents such as alkanes, carbon disulfide, and ethers. Other Notes: Complementary products:SyringesVialsGas Purification and Gas ManagementInlet Liners, Glass Wool, and Specialized Hand ToolsSepta and Specialized Hand ToolsColumn Ferrules, Nuts, and Specialized Hand Tools

  • …solvents such as acetone, methylene chloride (dichloromethane), and toluene. Other Notes: Complementary products:SyringesVialsGas Purification and Gas ManagementInlet Liners, Glass Wool, and Specialized Hand ToolsSepta and Specialized Hand ToolsColumn Ferrules, Nuts, and Specialized Hand Tools

  • …packet (10 ferrules) of 0.4 mm ID SilTite™ FingerTite ferrules (suitable for installing 0.1 - 0.25 mm ID capillary columns) and a ferrule install tool which allows you to seat the ferrule in the correct position on the capillary column. 0.5 mm ID SilTite™ FingerTite ferrules for 0.32…

  • Includes the most common consumable GC supplies and tools. All parts meet or exceed performance of instrument manufacturer’s parts. Parts list makes reordering easy. Inlet kit includes: 0.4, 0.5, and 0.8 mm ID graphite ferrules Viton O-rings Capillary nuts Inlet seals…

  • Titanium nut with integrated PEEK ferrule simplifies installation—one-piece design means no more lost ferrules. Convenient, built-in driver makes secure installations quick and easy. Allows easy 18,000 psi (1250 bar) seals without wrenches. Can be installed repeatedly with­out…

  • Titanium nut with integrated PEEK ferrule simplifies installation—one-piece design means no more lost ferrules. Convenient, built-in driver makes secure installations quick and easy. Allows easy 18,000 psi (1250 bar) seals without wrenches. Can be installed repeatedly with­out…

  • … Legal Information: GlasSeal is a trademark of Sigma-Aldrich Co. LLC Other Notes: Complementary products:SyringesVialsGas Purification and Gas ManagementInlet Liners, Glass Wool, and Specialized Hand ToolsSepta and Specialized Hand ToolsColumn Ferrules, Nuts, and Specialized Hand Tools

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.