Extraction Flask

This Mojonnier flask with a threaded opening is a modified design of our standard Mojonnier flask with stopper joint. This version has a 24-410 GPI thread and is supplied with a black phenolic cap with PTFE-faced white rubber liner (45066C-24410).

These borosilicate glass extraction apparatus are used to measure the fat content in dairy and other food products. Reference AOAC 989.05 for fat in milk. Top is tooled to accept rubber stoppers (not included).

Settling chamber capacity: 25 mL Extraction chamber diameter: 35 mm Top opening has pouring lip and is tooled for a#0 stopper.

Settling chamber capacity: 25 mL Extraction chamber diameter: 35 mm Top opening has pouring lip and is tooled for a#0 stopper.

Flat-bottom flask for Soxhlet Extraction Apparatus 1/Case

Round bottom, single neck flasks design for use with our 6810 series giant extractor apparatus.

…large variety of glassware, including standard test tubes, volumetric flasks and autosampler vials. Samples are aspirated through disposable, prepacked extraction columns which selectively remove compounds from solution. Extracted compounds are then eluted into tubes positioned in a removable rack…

The EME30100/CEBX1 Multi (Extraction) Mantle with three recesses has a built-in electronic temperature controller. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains cool. Key features for…

A block-tin condenser fits within a 400mL flask and this borosilicate glass extraction cup with siphon tube is suspended with wire from the condenser. Reference: ASTM D 297 Methods for Rubber Products; ASTM D 305 Test Method for Solvent-Extractable Material in Black Pigments.

…Extractor has a Standard Taper outer joint at the top for connection to the condenser and a Standard Taper inner joint at the bottom for connection to the flat bottom boiling flask. Soxhlet extraction apparatus uses cellulose, glass microfiber or fritted glass extraction thimbles (not supplied).

…for Mojonnier fat extraction. Each holder accepts up to four flasks, 37 mm in diameter.Maximum of two holders can be shaken at one time. The load max of up to five pounds (2.27 kg) need not be balanced. Unstoppered flasks may be shaken vertically. For horizontal shaking, flasks should be stoppered…

…Instructions included. Includes: 1 Allihn condenser with a 50/42 ground bottom joint 1 Extraction tube with a 50/42 ground top joint and a 24/29 ground bottom joint 1 Flat bottom flask, 500ml with a 24/29 ground top joint PRODUCT WARNINGS WARNING: This product can…

Used for continuous extraction of analytes from a solid into an organic solvent WHEATON Connection eliminates the need for hooks, springs and clamps common to standard ground joint designs As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the…

…Kjeldahl extraction on a micro scale to determine the protein content of food. These multibank units have 6 recesses in a stainless steel outer casing with back-mounted brackets (supplied with each unit), which can hold support rods of 12.7mm diamter max. This 6 recess model accommodates flasks of…

Similar to CG-1368, but supplied with a round bottom instead of a flat bottom flask. All specifications are the same as CG-1368.

…type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom flask.

The EMEA60500/CE Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…

Micro size Soxhlet extractor for use with 10 x 50mm paper or glass thimbles. Extractor body has a 19/22 top inner joint and a 14/20 lower inner joint. Complete apparatus consists of the extractor body, condenser, and 25mL round bottom flask. Glass thimbles must be ordered separately.

Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly. The adapter between the condenser and extractor has a top…

Complete with bulb type condenser and one flask. Cycling rates may be doubled over conventional style extractors. All joints are interchangeable. The 82" size is supplied with adapter for connecting the extractor and condenser. This is necessary because of the extremely large top joint on the…

This borosilicate glass X-Large Soxhlet extraction apparatus is used for the continuous extraction of solids with a suitable solvent. Complete units are supplied with a round bottom boiling flask (LG-7220-184 or LG-7220-188), a Soxhlet extraction tube (70mm or 100mm approx. I.D.) and an Allihn…

The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.

…with flasks ranging in size from 150mL to 5L. The 500mL, 1L, and 2L Extractors (with 2L, 3L, and 5L flasks, respectively) are supplied with improved Double Surface Condensers, for ultimate cooling and solvent retention. Borosil® Complete Soxhlet Extractors allow for extraction of…

The Micro- and Macro-Kjeldahl Extraction equipment has been designed for Kjeldahl extraction on a micro/macro scale to determine the protein content of food. These multibank units have 2 or 6 recesses in a stainless steel outer casing with back-mounted brackets (supplied with each unit), which…

Improved design of ACE extractor with Friedrichs Condenser in place of Allihn Condenser. Complete consists of flask cap, condenser, extractor, and flask.

…maximum heat transfer coupled with minimum risk of flask breakage. External surfaces are PTFE-coated and resistant to most chemical solutions. The robust construction permits continuous operation of the units as required by routine extraction tests. Each position has an indicator light to show…

A liquid-liquid extractor for use with lighter or heavier-than-water extracting solvents. Overflow and boil-up tube uses Ace-Thred Connections, thus allowing easy removal for cleaning to reduce cross contamination among samples. Complete consists of:Extractor Body, (approx.1.3L capacity), Dispersion…

This unique set includes matched components to provide a convenient Soxhlet extraction workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihin condenser with glass connectors,…

…with the addition of one female NPT port in the center. The optional PTFE compression fittings provide a convenient way to insert probes or connect PFA tubing or FEP tubing to reactors or flasks. PTFE stopper has an extraction nut permitting easy removal of the stopper from the glass outer joint.

Kontes™ flask with three angle necks for heating, stirring and solvent stripping without impairing ease of liquid and solid transfer. Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable…

Flask length PTFE stopper has a Polypropylene extraction nut permitting easy removal of the stopper from the flask. All sizes are solid.