Extraction Disks

Compare Tool

Select up to 3 products

Extraction Disks
1 - 32 of 43
Sort
View
Show
  • Compatible with most vacuum manifold systems that accept 1/8-inch male luer fittings Sample can be automatically introduced via 1/8-inch PTFE tubing or from the optional Diskcover-47 reservoir

  • Easier, faster and more economical testing of all water sampling types Patented Speedisk extraction disks are neither cartridge nor membrane. A thin bed of BAKERBOND sorbent is supported in a laminar configuration to allow for filtration, resist clogging and maximize capacity, adsorption and…

  • Disks are based upon polymeric sorbents dedicated to sample cleanup for the extraction of compounds from complex mattrices. AttractSPE Disks are thin and uniform membranes designed for extraction, purification, and concentration of analytes from large volume liquid and air samples. AttractSPE Disks

  • Disks are based upon polymeric sorbents dedicated to sample cleanup for the extraction of compounds from complex mattrices. AttractSPE Disks are thin and uniform membranes designed for extraction, purification, and concentration of analytes from large volume liquid and air samples. AttractSPE Disks

  • Glass fiber disks embedded with C18 or C8 bonded silica Extract semivolatile organic compounds Deep-pore design reduces clogging and allows faster flow rates Meet requirements for EPA Methods 525.1, 506, 550.1, and 549.1 Lower cost than PTFE disks

  • Low-cost option for disk extraction; fits standard 3 3/4" x 7 1/2" glass vacuum chambers Doubles sample capacity—holds six disks, compared to standard 12-port manifolds, which only hold three Individual vacuum control for each port improves reproducibility Collection plate…

  • The Diskcover-47 open-top reservoir allows you to pour up to 125 mL of sample directly onto the filter disk holder. It easily installs on top of the Diskcover-47 extraction disk holder. *Must be used with the Diskcover-47 extraction disk holder.

  • One-Piece (C18 bonded silica, bead and depth filter) design eliminates additional prefilter and filter aids. Provide up to 90% solvent reduction, excellent processing speed (fast flow rates), and contamination-free extractions with accurate and reproducible results. EPA Method 1664.

  • One-Piece (C18 bonded silica, bead and depth filter) design eliminates additional prefilter and filter aids. Provide up to 90% solvent reduction, excellent processing speed (fast flow rates), and contamination-free extractions with accurate and reproducible results. EPA Method 1664.

  • The carbon surface includes positive and negative charges. Extraction of highly polar compounds, such as N-nitrosodimethylamine,oxamyl and methamidophos, and volatile compounds such as trihalomethanes.

  • The carbon surface includes positive and negative charges. Extraction of highly polar compounds, such as N-nitrosodimethylamine,oxamyl and methamidophos, and volatile compounds such as trihalomethanes.

  • pH range 1-14. Extacting postive charged ions. Extraction and recovery of primary, secondary and some tertiary amines as well as most metal cations from aqueous solutions. Not for quarternary amines.

  • pH range 1-14. Recommended for non-ionic surfactants extraction.

  • Combine good retention capacity with high recoveries. End-capped to minimize polar interactions. Recommended for moderate non-polar analyte extractions. EPA 559.1

  • Combine good retention capacity with high recoveries. End-capped to minimize polar interactions. Recommended for moderate non-polar analyte extractions. EPA 559.1

  • pH range 1-14. Recommended for moderate non-polar analytes or aromatic analytes extractions. EPA 515.2 or other EPA methods calling for an SDB sorbent.

  • Speedisk Column And Disk Accessories

    Avantor - J.T.Baker®

  • Combine good retention capacity with high recoveries. End-capped to minimize polar interactions. Recommended for strong non-polar analyte extractions. EPA Methods 506,508.1,525.2, 550.1,608,1613B, etc.

  • pH range 1-14. Recommended for moderate non-polar analytes or aromatic analytes extractions. EPA 515.2 or other EPA methods calling for an SDB sorbent.

  • Combine good retention capacity with high recoveries. End-capped to minimize polar interactions. Recommended for strong non-polar analyte extractions. EPA Methods 506,508.1,525.2, 550.1,608,1613B, etc.

  • pH range 1-14. For extraction of Divalent metals and other divalent cations. Relative selectivity: Pb>Cu>Cd>Co>Fe>Ca>Sr. Capacity is relatively high, dependent on pH and other ions.

  • Using 47mm membranes for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…

  • Using 47mm membranes for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has removable 47mm stainless steel support screen for use with viscous or proteinaceous solutions. Complete assembly includes a…

  • …delivery system to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge, or to a disk on a vacuum manifold system for extraction or cleanup. Each unit consists of six transfer lines with a stainless steel weight on one end and a color-coded…

  • …stoppers. Recommended for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc and a vacuum connection located above the drip tip to prevent filtrate from entering…

  • …for sample disk extraction. Load limit 10 tons (9.1 metric tons); weight 2.2 lbs (1 kg). 40 mm Die Set: To form 40 mm sample disks. Set includes evacuable die body, base, plunger, two 40 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit…

  • Use as a filtration aid when extracting samples with a high particulate content using Empore disks. Approximately 40grams to cover a 90 mm disk 1cm deep. Approximately 15grams to cover a 47mm disk 1cm deep.

  • …efficient extractions. The Empore line of SPE disks comprises of the most complete line of SPE disks for extracting large volumes of aqueous samples. The product line ranges from time-tested C18 to unique phase chemistries such as carbon and the highly polar Oil and Grease disk. The disks are…

  • …efficient extractions. The Empore line of SPE disks comprises of the most complete line of SPE disks for extracting large volumes of aqueous samples. The product line ranges from time-tested C18 to unique phase chemistries such as carbon and the highly polar Oil & Grease disk. The disks are…

  • …kit from extraction to amplification Sensitive only require 0.5cm disk of leaf tissue Detail easy to follow protocols accompany kit for ease of use. In a typical procedure, DNA is extracted and prepared from a sample that has been incubated in Preparation solution and Extraction solution.…

  • …100% nitrile gloves contain no natural rubber or silicone and meet stringent requirements for particles and extractables. The proprietary ESD formulation was developed for the Hard Disk Industry, and has a greater capacity to dissipate a static charge with a surface resistivity of 10-08 ohm/square…

  • …solvent to circulate through the 1 liter sample bottle continuously until the extraction is complete. By incorporating a stop-cock assembly and 3-ball Snyder column, the Corning One-Step extractor can both extract desired analytes as well as evaporate solvent from the end by-product within the…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.