Compare Tool

Select up to 3 products

1 - 32 of 892
  • Reacti-Vap™ Evaporators

    Thermo Scientific

    …preparation Required Accessories 9-port Reacti-Vap Evaporator requires a single block Reacti-Therm Module 27-port Reacti-Vap III Evaporator requires a triple block Reacti-Therm III Module Reacti-Vap Evaporator replacement parts extend the lifetime of Reacti-Vap Evaporators

  • Rotavapor® R-300 Rotary Evaporators


    Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

  • Hei-VAP Value “The Collegiate”


    Intelligent Evaporation: The Hei-VAP Series Rotary Evaporators from Heidolph All Hei-VAP models come with a detachable operating panel with 4’ (ft) tethered cable that provides unparalleled safety by attachment outside of fume hoods and greater visual control. Hei-VAP rotary evaporators

  • Multivapor P6 Evaporators


    …vapor to the condenser assembly of the rotary evaporator. This concept increases the flexibility of the Rotavapor whilst reducing the total evaporation time. Hence, excellent time and resource savings are achieved on a minimal footprint. Evaporate 6 x 150 ml in parallel One condenser,…

  • Buchi Spider Evaporator


    Spider evaporators are for use when you need to concentrate several samples under the same conditions. Up to five samples can be concentrated simultaneously using 50 or 100 mL flasks. Up to twenty samples can be concentrated simultaneously using 20 mL cylindrical tubes.

  • Evaporator System


    evaporation of excess liquid Digital temperature control Autoclavable Evaporator system provides a low cost solution for the concentration of 96 well extractions and reactions. Each SS needle delivers and equal flow of nitrogen or other gas. The system gently speeds the evaporation

  • Rapidvap N Evaporation System


    Fast, unattended concentration of environmental samples Combines mechanical vortex, heat and nitrogen blow down technologies Process eight samples up to 450 mL in size at once Vortexes up to 500 rpm. Heat warms samples from ambient to 70°C. The nitrogen blow down manifold is microprocessor…

  • Porcelain Evaporating Dishes without Spout


    Straight sides and flat bottom glazed inside and out except for rim Used in milk analysis

  • Rotavapor® R-100 Rotary Evaporator


    The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included is…

  • RapidVap® Vertex™ Dry Evaporators


    …and reliable performance are backed by a one year warranty. Using dry heat and nitrogen blow down, the NEW RapidVap Vertex Evaporator speeds evaporation of up to 50 samples at the same time. A convenient touch screen LCD allows easy programming of time and temperature. Up to ten different…

  • Ultravap® Levante BlowDown Evaporator


    Ultravap® Levante - a automation-ready blowdown evaporator.  Robot-compatible Color touch screen display   Store up to five evaporation programs  *  Remote control from PC  Reversible screen for integration at side of robot  Built-in fume…

  • RE100-Pro Rotary Evaporator

    Kemtech America

    Rotary Evaporator and Glassware Accessory. Evaporator is capable of 20-280 rpm with a 5 liter heating bath. Product has a 150mm lifting range and a patented condenser for excellent cooling performance. Digital LCD screen displays the temperature, rotational speed and time information …

  • MiniVap® BlowDown Evaporator


    The MiniVap® is designed for low usage R&D departments where low numbers of individual plates or vials need drying. The MiniVap® is easy to operate and maintain. Can be used with any ANSI/SLAS 96-well plate. Compact footprint - fits all standard fume cupboards.

  • MiniVap® Gemini BlowDown Evaporator


    …and evaporator for high throughput laboratories. The nitrogen blowdown process is ideal for lower boiling point organic solvents such as methanol, dichloromethane, hexane and acetonitrile. The robust design of the MiniVap(R) Gemini joins together two individually temperature-regulated evaporation

  • Buchi Evaporator Accessories


    A variety of accessories are available for use with Buchi evaporators

  • SCILOGEX RE100-Pro Rotary Evaporator


    …180°C Detachable LCD operating panel for remote control purposes Speed range from 20 to 280 rpm The Scilogex RE100-Pro Rotary Evaporator fetaures a large to read large digital LCD screen displaying the temperature, rotation speed and timer. The display can be removed for remote…

  • Centrivap Centrifugal Sample Concentrator


    Rapidly concentrates multiple samples New style, compact with small footprint Built-in vacuum delay Centrifuge up to 1725 rpm Easy-to-read digital control panel Epoxy coated aluminum base, acrylic lid, phenol-free gasket compliment this system. Optional “heat boost”…

  • Buchi Rotavapor® Evaporator Flasks


    These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

  • Synthware Rotary Evaporator Vapor Ducts

    Kemtech America

    Synthware rotary evaporator vapor duct. Precision ground and polished. Meet manufacturer's standards. With standard taper inner joint.

  • Fritted Bump Trap for a Rotary Evaporator

    DWK Life Sciences (Kimble)

    This trap has a 40-60 micron porosity fritted disc sealed between the lower inner and top outer joint to prevent the contents of the flask from entering into the condenser in the event of bumping. All traps have a Standard Taper 24/40 top outer joint Manufactured from 33 expansion, low…

  • Evaporation Dish, Shallow 30ml


    Evaporating dish with lip, shallow form, glazed inside except for rim and partially outside.

  • Buchi Rotavapor® Drying Evaporator Flasks


    These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…

  • Six Port Mini-Vap Evaporator/Concentrator


  • Rotary Evaporator Accessories


    Accessories for use with Heidolph Rotary Evaporators.

  • Synthware Rotary Evaporator Traps

    Kemtech America

    Synthware rotary evaporator trap. Anti-climb design. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser.

  • Evaporator Cover


    Evaporator Cover for Water Purification Systems

  • Ultravap® Mistral BlowDown Evaporator


    …compatitble blowdown evaporator.  Fully liquid handling robot-compatible dry down station  Plate shutttle sends/retrieves plates from robot deck  Adjustable shuttle position and height  Touch screen display  Store up to 15 evaporation programs  Up to…

  • Tubes, Connecting, Rotary Evaporator

    Ace Glass

    Borosilicate glass connecting tubes for Model R220 rotary evaporator. These components match various connecting tubes for all the rotary evaporator glass sets. The tubes are used in the upper glass assemblies to connect the various condensers and expansion tanks.

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    Replacement evaporator flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Safety coated.

  • Expansion Tank, Rotary Evaporator

    Ace Glass

    Borosilicate glass expansion tank for large scale rotary evaporators. This fits easily into model R220 rotary evaporators. The tank is part of all D Series glass sets. Available in either safety coated or plain versions. Inner DN ball joint inlcudes a size -225 CAPFE o-ring.

  • Flask, Receiving, Rotary Evaporator

    Ace Glass

    Graduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.