Evaporating Flask

Compare Tool

Select up to 3 products

Evaporating Flask
1 - 32 of 137
Sort
View
Show

Corning

  • Buchi Rotavapor® Evaporator Flasks

    Buchi

    These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

  • Flask, Rotary Evaporator, Large

    Ace Glass

    Rotary evaporation flasks available plain, poly-coated or ambered. Poly-coating has a maximum temperature of 100 degrees C and can withstand acid and solvent splashes but not soakings. Small flange is 90mmod,67mmid and 18mm thick. Medium flange is 100mmod,72mmid and 19mm thick. Large flange is…

  • Flask Ring Made Of Non-Slipping EPDM

    Buchi

    Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

  • Rotavapor® R-100 Rotary Evaporator

    Buchi

    The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included is…

  • Buchi Spider Evaporator

    Buchi

    Spider evaporators are for use when you need to concentrate several samples under the same conditions. Up to five samples can be concentrated simultaneously using 50 or 100 mL flasks. Up to twenty samples can be concentrated simultaneously using 20 mL cylindrical tubes.

  • Buchi R-210 & R-215 Rotavapor Accessories

    Buchi

    Evaporating flask feed is via stop-cock. Includes 1L receiving flask, receiving flask clip, stopcock, PTFE fill tubes, and set of GL-14 hose connections and caps. 1230E20 - Type A Condenser, Diagonal, can be used where height is limited, For standard distillations, evaporating flask feed via…

  • Evaporating Flasks, Large Scale

    Chemglass

    Flasks are compatible with Buchi large scale rotary evaporators. Flasks to fit large scale rotary evaporators. Flasks have a HEAVY WALL for vacuum applications and are balanced to prevent run-out during rotation. Available plain or plastic coated to prevent injury from broken glass while preventing…

  • Buchi Rotavapor® Receiving Flasks

    Buchi

    These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.

  • SYNTHWARE Evaporation Flasks

    Kemtech America

    …modified evaporation single neck flask with a standard taper outer joint. Low profile design sits upright on bench and also provides for easy product access with a spatula. Flask shape is excellent for the controlled evaporation of foaming solvents such as toluene or xylene on a rotary evaporator.

  • Evaporating Flask Seal R-220

    Buchi

  • Flasks, Evaporating, Heavy Wall, Single Neck, Recovery Flasks, Plastic Coated

    Chemglass

    Similar to CG-1512 recovery flasks, but plastic coated to prevent injury from broken glass and spillage of hazardous materials.

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    Replacement evaporator flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Safety coated.

  • Buchi Rotavapor® Drying Evaporator Flasks

    Buchi

    These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…

  • Rotavapor® R-300 Rotary Evaporators

    Buchi

    Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

  • Flask, Recovery, Rotary Evaporator, Indents

    Ace Glass

    Replacement drying flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Available plain or safety coated.

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights.

  • Evaporator Flask for Kuderna Danish Concentrator

    DWK Life Sciences (Kimble)

    500mL Flask, 24/40 Top, 19/22 Bottom

  • Rotary Evaporators Accessories - Flasks

    IKA Works

    Thomas Nos. 1203D21 through 1203D26 The flask is made of high quality borosilicate glass, coated.

  • Adapter, Rotary Evaporator Receiving Flask

    Ace Glass

    Replacement receiving flask adapters for Buchi rotary evaporators. Joins steam tube to receiving flask. Combi-clip not included.

  • Flasks, Evaporating, Heavy Wall, Single Neck, Recovery

    Chemglass

    Evaporating flask for use with rotary evaporators. Flasks have a HEAVY WALL for vacuum applications and are balanced to prevent run-out during rotation. For Plastic Coated flasks, see CG-1512-P.

  • Mity Plugs

    Jaece

    …plugs for all size test tubes and laboratory flasks. MITY Plugs are non-shedding, dense weave cellulose acetate E plugs for drosophila vials and bottles. Dense weaving offers a superior barrier to mite infestation. Allows for reduced food evaporation to keep food fresh longer. Unique…

  • Flask, Rotary Evaporator, Large, Indented

    Ace Glass

    These flasks are also referred to as drying flasks. They are particularly suited to the drying of powdered samples as the baffles or indents provide superior mixing over plain wall flasks. X-Large flanges, common on R220 units, are 149.5mmod,118.8mmid and 21mm thick. See our 6702-300 for a o-ring…

  • S-EVAP Solvent Evaporators for Round Flasks

    Organomation

    The S-EVAP-RB® solvent evaporator for round flasks allows for up to 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using hexane and other approved solvents and concentrating extracted materials from Soxhlet operations. The…

  • Vertical Condenser with Manifold and Cut-Off Valve

    IKA Works

    …reflux distillation. The distributor features a condensate cover and an outlet channel which prevent the condensate from coming into contact with the seal. The solvent to be distilled can be continuously fed in through the PTFE inlet tube. Condenser and receiving flask coated for shatter protection.

  • Buchi Bump Trap STJ

    Buchi

    Placed between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.

  • Receiving Flask, w/Suction Cock, 5 L

    Yamato

  • PYREX® Rotary Evaporator Trap with Standard Taper Inner and Outer Joints

    Corning

    These PYREX® traps are used in rotary evaporators. They have a round body with upper and lower stems. The lower stem has a Standard Taper inner joint at the bottom and extends upward inside the body. The closed top of this stem has two side openings. The upper stem has a Standard Taper outer joint.

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights. Microscale versions, codes -43

  • Flask, Receiving, Rotary Evaporator

    Ace Glass

    Graduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.

  • Flask, Receiving, Rotary Evaporator

    Ace Glass

    Borosilicate glass receiving flask for all large scale rotary evaporators. Available in safety coated or plain glass. Side neck includes a SVL thread vent cap. Bottom inner ball joint includes CAPFE o-ring. Dark amber coated glass version is also available.

  • Flask, Rotary Evaporator, Receiving, Jacketed

    Ace Glass

    New design jacketed receiving flask. Fits all rotary evaporators. Outer jacket has 28/15 o-ring ball joints to seal to chiller hoses. Has an SVL thread vent cap on side joint. Bottom DN25 ball joint has CAPFE o-ring. Jacket inlet and outlet ball joints have FETFE o-rings.

  • Flask, Rotary Evaporator/Freeze Drying

    Ace Glass

    Dual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.