End To End Rotator

The Rotator Genie is a compact but rugged lab rotator available in two INTERCHANGEABLE platform configurations providing the ability to hold virtually any kind of container. Choose from Standard Platform with Retaining Bands or Magnetic Platform Magnetic stainless steel platform and clip…

…rotators keep cultures in suspension without compromising viability. The angle of rotation is fully adjustable with a scale to measure and reproduce the mixing angle, from horizontal for minimal mixing to vertical for full end-over-end mixing. Wide operating conditions allow use in incubators up to…

…vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. The Roto-Mini rotator is also available in a “Plus” configuration, providing the following additional features: Variable speed: 5 to 70rpm “Mix” function: Rotating in…

…an end over end tumbling motion, similar to that used to mix blood tubes. Rotating the rotisserie at a right angle to the shaft produces a gentle mixing motion, ideal for delicate samples. Any position in between these two extremes may be selected to achieve the desired mixing action. Rotation speed…

…Powder Rotator has the drive bar set at a 20° angle so the motion of the rotator closely reproduces the mixing action achieved when mixing by hand, making it useful for working with hard-to-mix powders. Not only is the powder tossed from end-to-end, it is rotated around the inside of the vessel to…

…rooms down to 4°C. The angle of rotation is fully adjustable with a scale to measure and reproduce the mixing angle, from horizontal for minimal mixing to vertical for full end-over-end mixing. An integral tray catches any spillage from the rotating tubes SB2- The SB2 rotator has a constant…

…levels of tumbling, to forceful end over end mixing simply by changing the rotisserie position. When a rotisserie is inserted horizontally (tubes held vertically), an end over end motion is produced. The unit can then be used for simple rotating, or rested on either end to create a tumbling motion.…

…easily slotted into the holder where they will be securely held. Holders SB3/1, SB3/2 and SB3/3 offer end over end action. Holders SB3/4, SB3/5 and SB3/6 offer a rolling action for the tubes The accessory SB3/DUAL can be used to fit two tube holders to the SB rotator simulataneously.

…single-use connections every time. security to your most critical fluid handling applications. CPC MPC Couplings offer optional locking sleeves to further guard against accidental disconnects. In addition, coupling halves can be rotated when connected to reduce tube kinks. MPC Connectors are…

…single-use connections every time. security to your most critical fluid handling applications. CPC MPC Couplings offer optional locking sleeves to further guard against accidental disconnects. In addition, coupling halves can be rotated when connected to reduce tube kinks. MPC Connectors are…

…sleeve to protect user in the event of breakage. Safety cap at the end of the discharge tube is easy to open, even in gloves. Analog models are adjusted by sliding the corrosion resistant pointer to the desired volume and tightening the screw. Digital models are adjusted by turning a knob to…

…from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. For applications requiring temperature control, the Roto-Therm series can be digitally programmed to maintain chamber temperatures of ambient +5°C to…

…conventional pipets Knurled thumbwheel is rotated to raise or lower plunger by rack-and-pinion drive For rapid delivery, plunger can be pressed directly Tapered socket grips mouth end of pipet Quick release lever on side of housing is pressed to aid in removing pipet Housing is polypropylene…

…Spectra/Por Magnetic-Weighted Closures contain a magnetic fluorocarbon coated stainless steel bar, eliminating the need for conventional stir bars. Applied to the bottom end of the dialysis tubing, this closure provides complete submersion and gentle rotation of the sample on a stir plate.

Thumb wheel rotated to raise or lower plunger Polypropylene housing, with silicone rubber seals Syringe-type, for easy, one-hand control of filling and delivery from conventional pipets. For rapid delivery, plunger can be depressed directly. Tapered-plastic chuck grips mouth end of pipet.…

…gently elevated about 0.5 in (13mm) and returns to the horizontal starting position. This additional, gentle up/down motion provides a “wave” effect and guarantees that the entire sample is subjected to complete, thorough mixing, end to end. This built-in tilt feature provides a level of…

…test tube racks up to 12" x 5" (305 x 127 mm) Rack is secured in holder by lid which fits over threaded end posts and is adjustable in height above support platform. Knurled nuts are used to fasten lid in place. Spring-loaded release mechanism permits holder to be rotated about shank in…

…settings in 1 µL increments over range 100 to 1000 µL Volumetric accuracy and reproducibility better than ±1% Bores rotated to lock in place over eccentrically mounted disc on pipet body Overall length 210 mm End of bore takes 7691L60 valve for automatic refill…

…Telescopic Rods Different tools can be attached to the telescopic rod (snap-in joint). The individual rods have been provided with an end stop. This means that one rod cannot accidentally slip out of another rod. The telescopic rods cannot be rotated radially, which means even better handling! …

…up, a 17.8 cm diameter divided circle with clear gradations, a double-ended vernier with illuminated magnifier reading to 1' resolution, and a 7cm diameter prism table which rotates 360 degrees and adjusts 2 cm in height for any size of accessories. It comes complete with grating and holder, prism,…

…of the dsDNA to allow rotation of the nicked 3'-hydroxy end around the unnicked strand, while the 5'-phosphoryl end of the nicked DNA forms a covalent phosphodiester bond with a tyrosine residue on Topo I. The nicked 3'-hydroxy end then attacks the DNA-enzyme phosphoester bond to religate the nicked…

…Automatic Selectable Volume Microliter Pipet Air displacement type for one hand dispensing Push-button with positive click stops is rotated to set delivery volume on digital display Factory calibrated; can be easily recalibrated in the lab Color-coded pipet body is aluminum and…

…placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of testing results. From the standard USP stainless steel 40-mesh basket, to Agilent…

…placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of testing results. From the standard USP stainless steel 40-mesh basket, to Agilent…

…placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of testing results. From the standard USP stainless steel 40-mesh basket, to Agilent…

…placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of testing results. From the standard USP stainless steel 40-mesh basket, to Agilent…

The GTR-HA Tube Rotator provides slow to vigorous mixing of your biological samples and solutions in a simple, lightweight and easy to use design. Simply turn on the power and adjust the speed using the analog dial for your desired level of mixing. The unit includes a rotisserie-style stainless…

…placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of testing results. From the standard USP stainless steel 40-mesh basket, to Agilent…

…placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of testing results. From the standard USP stainless steel 40-mesh basket, to Agilent…

…placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of testing results. From the standard USP stainless steel 40-mesh basket, to Agilent…

…time LCD display Speed range from 10 to 70rpm Full adjustment of mixing action from end over end or rolling Adjustment mixing angle from 0° to 90° Wide variety of accessories are available Cold room friendly Can stack up to two tube holders/disks for additional capacity

…placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of testing results. From the standard USP stainless steel 40-mesh basket, to Agilent…