Durometer

Compare Tool

Select up to 3 products

Durometer
1 - 32 of 38
Sort
View
Show
  • …PosiTector SHD measures the indentation hardness of non-metallic materials such as polymers, elastomers and rubbers. In the corrosion industry, durometers are commonly used to ensure proper curing of pipeline repair wraps. Two models are available for different hardness ranges - Shore A and Shore D.…

  • O-Rings are 70 durometer Viton.

  • Medium durometer PTFE / silicone septum Allows for good resealability, core resistance, multiple injections and easy penetration

  • Preassembled closures minimize contamination during sample prep Tinplate caps are magnetic with an 8mm center hole 1227J06 includes a thin, soft durometer septum designed for SPME

  • Cap Screw 18mm Magnet TFE / Chlbutl

    Thermo Scientific Sun SRi

    Preassembled closures minimize contamination during sample prep Tinplate caps are magnetic with an 8mm center hole 1227J06 includes a thin, soft durometer septum designed for SPME

  • CRS Septa

    Chromatography Research Supplies

    General Purpose Septa Economy Blue Silicone Soft - easy to penetrate Maximum temperature of 250°C Designed for non-demanding, routine applications. Durometer rating of 40 - 45. Suitable for 90% of all GC analyses.

  • …odorless, noncytotoxic, nonpyrogenic, and nonhemolytic Autoclavable; also can be sterilized by gamma radiation, EtO and chemical procedures Durometer hardness: Shore A, 50 Ordering Information: Double-bagged in case of 50′ (15.2m) Note: Not intended for invasive use

  • …developed for applications that require contact with bodily fluids. It is ideal for blood and IV solutions, dialysis equipment, catheters and pumps. Durometer hardness: Shore A, 65. Non-hemolytic and non-pyrogenic. It meets USP Class VI, ISO 10993, and European Pharmacopoeia 3.1.1.2 requirements.

  • Crimp Seals with Septa

    National Scientific

    11 mm 2695B50, B53, B55 and B57 are made of the highest quality, medium durometer red rubber with a thin (0.015") layer of clear PTFE. Offers moderate resealability and excellent chemical inertness. Not recommended for multiple injections or holding samples for further analysis. 1230W36 is…

  • …reduce puncturing. It can be fabricated into cannulas or protective sheaths using thermoforming and flaring techniques. Micro diameters are ideal for intravenous or intra-arterial infusion and minimally invasive applications. Durometer hardness: Shore A, 80. It meets USP Class VI requirements.

  • …Nalgene™ 180 Excellent alternative to latex More cost-effective than silicone Inner bore prevents any build-up Withstands autoclaving gamma sterilization Durometer hardness (shore A): 55 Temperature range: -58°F to 165°F Meets FDA standards (CFR 21, Part 175.300)

  • …to minimize absorption of proteins and food products Autoclavable; also can be sterilized by gamma radiation, EtO and chemical procedures Durometer hardness: Shore A, 50 Ensure consistently reliable and accurate fluid transfers with Thermo Scientific™ Nalgene™ Pharma-Grade…

  • …surface minimizes absorption of proteins and food products Autoclavable; also can be sterilized by gamma radiation, EtO and chemical procedures Durometer hardness: Shore A, 50 Ordering Information: Double-bagged in case of 25′ (7.6m) Note: Not intended for invasive use.

  • …psi.  Our Vinyl Food Grade Tubing is designed for use in the laboratory with an elongation of 400% and excellent aging characteristics. Durometer hardness, shore A of 68 with a temperature resistance of 212°F and a brittle temperature of -40°C. Glass-like transparency; smooth, dense…

  • Perfluoro O-Rings

    Chemglass

    …and they offer a cost savings over similar o-rings such as Kalrez® 4079 and Chemraz®. Perfluoro o-rings are stocked in WHITE 75 durometer (unless otherwise noted). The effective service temperature is -7 to 230°C. Recommended for use with acids, inorganic bases, alcohols/ethers,…

  • …and easily cover large areas and require less time and labor to install. The tiles are very substantial, and are designed with an excellent durometer to prevent standing worker fatigue, and encourage productivity. The tiles are engineered to withstand cart traffic of up to 64 psi - the equivalent…

  • Septa

    Agilent Technologies

    …Septa are the preferred septum for autosamplers and are ideal for overnight runs. You can make up to 400 injections per septum and its soft 45 Durometer rating is easy on autosampler needles. Advanced green Septa are long-life, high temperature devices. Agilent offers users a high-performance…

  • …set-ups Low-temperature resistant for low level cryogenic applications Resistant to corrosive chemicals for laboratory applications Low durometer for use in low-torque pump applications Meets FDA requirements for food contact Typical Applications Synthesis and research set…

  • …set-ups Low-temperature resistant for low level cryogenic applications Resistant to corrosive chemicals for laboratory applications Low durometer for use in low-torque pump applications Meets FDA requirements for food contact Typical Applications Synthesis and research set…

  • Nalgene™ Non-Phthalate PVC VacuumTubing

    Thermo Scientific Nalgene

    …Marked with I.D. and regulatory compliance as well as at 12 in. intervals for easy identification and measurement     Durometer hardness is Shore A, 60     Does not impart odor or taste     Can write on with Nalgene Lab marker …

  • …strength Stainless Steel Chamber (1) Industrial grade silicone gasket    - Gasket can withstand 390F max temp.    - 60A durometer density (1) Glycerin filled vacuum gauge (must be regulated upon arrival)    - Max vacuum -29Hg (+/-.5Hg) at sea level (1)…

  • Nalgene™ Non-Phthalate PVC Tubing

    Thermo Scientific Nalgene

    …regulatory compliance as well as at 12 in. intervals for easy identification and measurement (except as noted below)     Durometer hardness is Shore A, 60     Does not impart odor or taste     Can write on with Nalgene Lab marker …

  • Nalgene™ Metric Non-Phthalate PVC Tubing

    Thermo Scientific Nalgene

    …    Marked with I.D. and regulatory compliance as well as at 10cm. intervals for easy identification and measurement     Durometer hardness is Shore A, 60     Does not impart odor or taste     Can write on with Nalgene Lab marker …

  • …of 18” x 18” ergonomic tiles. These professional grade components are incredibly substantial, and are designed with an excellent durometer to prevent standing worker fatigue and encourage productivity. These larger components quickly and easily cover large areas and require less time…

  • …and easily cover large areas and require less time and labor to install. Tiles are incredibly substantial, and are designed with an excellent durometer to prevent standing worker fatigue, and encourage productivity. The tiles are engineered to withstand cart traffic of up to 64 psi - the…

  • …Includes: (1) Soda lime triple tempered glass bowl (1) Industrial grade silicone gasket Gasket can withstand 390F max temp. 60A durometer density (1) Glycerin filled vacuum gauge (must be regulated upon arrival) Max vacuum -29Hg (+/-.5Hg) at sea level (1) Leak free nickel…

  • … Designed specifically for use in peristaltic pump applications, Tygoprene® Pump Tubing maintains a pump life of over 500 hours. With a durometer hardness of Shore A 60, it is extremely flexible and exhibits superior flex life, reducing downtime due to pump tubing failure (see “Comparative…

  • … This Kit Includes: (1) Aluminum Chamber (1) Industrial grade silicone gasket (Gasket can withstand 390°F max temp,; - 60A durometer density) (1) Glycerin filled vacuum gauge (must be regulated upon arrival) (Max vacuum -29Hg (+/-.5Hg) at sea level) (1) Leak free nickel…

  • …Chamber (1) Industrial grade silicone gasket      - Gasket can withstand 390F max temp.      - 60A durometer density (1) Glycerin filled vacuum gauge (must be regulated upon arrival)      - Max vacuum -29Hg (+/-.5Hg) at sea…

  • …Chamber (1) Industrial grade silicone gasket      - Gasket can withstand 390F max temp.      - 60A durometer density (1) Glycerin filled vacuum gauge (must be regulated upon arrival)      - Max vacuum -29Hg (+/-.5Hg) at sea…

  • …Stainless Steel Chamber (1) Industrial grade silicone gasket     - Gasket can withstand 390F max temp.     - 60A durometer density (1) Glycerin filled vacuum gauge (must be regulated upon arrival)     - Max vacuum -29Hg (+/-.5Hg) at sea level …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.