Ducted Fume Hood

Compare Tool

Select up to 3 products

Ducted Fume Hood
1 - 32 of 55
Sort
View
Show


  • RXPert™ Single Filtered Balance Systems

    Labconco

    …provide user protection by keeping powders and particulates contained during hazardous drug manipulation. These powder hoods include a canopy and damper for thimble ducting the enclosure to the outside. All models feature: Patented* design Deep interior of 23.4" or 30.0"…

  • Protector Work Stations

    Labconco

    …pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a front air foil and rear baffle to direct the inflow air across the work area and away from the operator.  Protector Work Stations designed for ducting to the outside are available with or without a…

  • Benchtop Polypropylene Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Universal Fume Hoods

    Hemco

    The Universal Fume Hood is designed for light to medium duty fume removal, and offers such features as a sturdy dual wall construction, and a fully vertical sliding sash. It is completely molded of fire retardant fiberglass. Thomas Numbers 1167M01-M04: Units do not have a blower and require a…

  • Basic 47 & Basic 70 Fume Hoods

    Labconco

    …feet or shallow counter tops 3/16" tempered safety glass counterbalanced sash 10" diameter duct collar Powder-coated 16 gauge steel liner and exterior Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a vapor-proof 100-watt…

  • Fume Hood Exhaust Blowers

    Hemco

    Epoxy coated steel, belt drive, exhaust blowers for canopy hoods based on duct runs under 25ft and no more than 4 elbows. These exhaust blowers are designed to maintain between 80 to 100FPM.

  • 8' Protector Echo Filtered Fume Hoods

    Labconco

    …traditional hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 8' Echo Fume Hood

  • 6' Protector Echo Filtered Fume Hoods

    Labconco

    …traditional hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 6' Echo Fume Hood

  • Flexible Duct Connections

    Labconco

    Reduce vibration between the blower and PVC ductwork. Include two clamps for easy installation.

  • Thermoplastic Ducts

    Labconco

    PVC exhaust duct is Type I, unplasticized, schedule 40, lightweight and corrosion-resistant. A Female Duct Coupling is required to join two sections.

  • PVC Blowers

    Labconco

    …housing of unplasticized Type I polyvinyl chloride for complete corrosion protection; inlet and discharge diameters are sized to receive rigid PVC ducting material directly for easy installation; dry powder epoxy-coated base and weather cover provide long life in extreme weather; adjustable sheaves…

  • Flexible Exhaust Duct, 42" length

    Labconco

    42" length of 2" diameter steel-reinforced vinyl duct with two clamps.

  • Protector® Airo™ Filtered Fume Hoods

    Labconco

    …Filtered Fume Hood. Labconco has combined its patented* fully-featured, containment- enhancing Protector® Hood design with Erlab’s GreenFumeHood® (GFH) Filtration Technology to deliver a multi-use fume hood that requires no ducting. The Protector Airo Filtered Fume Hood delivers…

  • Fume Adsorbers

    Labconco

    …vapors are trapped in the capillary-like channels of the carbon filter while clean air is recirculated into the laboratory. The Fume Adsorber requires no ducting to the outside and is completely portable. It includes one replaceable six pound (2.7 kg) type AC activated carbon filter. The filter…

  • 5' Protector Echo Filtered Fume Hoods

    Labconco

    hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 5' Echo Fume Hood requires a…

  • Thermoplastic Duct Reducers

    Labconco

    PVC coupling type reducer designed for connecting thermoplastic duct of different diameters with no equivalent resistance.

  • Exhaust Dampers

    Labconco

    …to maintain proper airflow for remote blower or house exhaust systems. 1' equivalent resistance. 5165J25, 0516E55, 0516E98, 0516E97 & 0516G13: PVC Manual Duct Dampers allows you to balance airflow. Used with exhaust and auxiliary-air ducts, and is usually placed directly above the fume hood.

  • AC600 Series Ductless Chemical Fume Hoods

    …applications. Smaller in size, it makes an excellent portable fume hood for the classroom or laboratory. Standard Features AirSafe™ automatic safety controller Integral base with deep spill lip No ducting required Minimal installation - plugs directly into a standard…

  • Ductwork for Protector ClassMate Hoods

    Labconco

    Exhaust adapter for back to back ClassMate Fume Hoods to connect (2) 12" exhaust collar connections to one 12" connection. Constructed of powder-coated steel.

  • Benchtop Powder Coated Steel Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • UniLine Fume Hood Base Cabinets

    Hemco

    Base cabinets built to last! UniLine Fume Hood Base Cabinets are constructed of top grade furniture steel and finished in a chemical resistant powder coated finish meeting or exceeding SEFA 8 recommended practice for laboratory casework. UniLine Base Cabinets set the standard for safety and…

  • RXPert™ Double Filtered Balance Systems

    Labconco

    …double HEPA filtration to contain airborne particulates and powders, providing user protection during hazardous drug manipulation. No outside ducting is required. All models feature: Patented* design Deep interior of 23.4" or 30.0" depending on the model Ergonomic…

  • 4' Protector Echo Filtered Fume Hoods

    Labconco

    hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 4' Echo Fume Hood

  • 4' Protector Pass-Through Laboratory Hoods

    Labconco

    Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • XPert Balance Enclosure Stations

    Labconco

    XPert Filtered Balance Stations are designed to protect the user during powder weighing operations. Ducting to an outside blower is required. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar…

  • Purifier® Cell Logic®+ Class II B2 Biosafety Cabinets

    Labconco

    The Purifier Cell Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…

  • CApture™ Portable Fuming System

    Labconco

    …weight 5 lbs. (2.3 kg). Exhaust Connection Kit Allows the Fuming System to exhaust to a remote location, such as out a window or into a nearby fume hood. Includes 10' long, 4" diameter collapsible duct. Shipping weight 1 lb. (0.5 kg). Stainless Steel Shelf Allows…

  • 6' Protector Pass-Through Laboratory Hoods

    Labconco

    Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Duct Couplings

    Labconco

    PVC Duct Coupling connect two sections of Thermoplastic Duct.

  • Epoxy Resin Work Surfaces

    Hemco

    Epoxy Resin Worksurfaces are recommended for general laboratory work where greater chemical resistance is required. Surface is dished 3/8" to contain spillage. Worksurface is cast of thermosetting epoxy resin, creating a molded solid 1-1/4" thick top which is extremely hard, abrasion and…

  • Paramount® Ductless Enclosures

    Labconco

    For removal of both gaseous and particulate contaminants Paramount® Ductless Enclosures are self-contained work stations (ductless fume hoods) that use carbon filters to rid the laboratory or unsafe concentrations of chemical vapors. Air inside the enclosure passes through filters before…

  • CApture™ Portable Fuming System Accessories

    Labconco

    …Shipping weight 5 lbs. (2.3 kg). Exhaust Connection Kit Allows the Fuming System to exhaust to a remote location, such as out a window or into a nearby fume hood. Includes 10' long, 4" diameter collapsible duct. Shipping weight 1 lb. (0.5 kg). Stainless Steel Shelf Allows evidence…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.