Ducted Fume Hood

Compare Tool

Select up to 3 products

Ducted Fume Hood
1 - 32 of 61
Sort
View
Show
  • Universal Fume Hoods

    Hemco

    The Universal Fume Hood is designed for light to medium duty fume removal, and offers such features as a sturdy dual wall construction, and a fully vertical sliding sash. It is completely molded of fire retardant fiberglass. Thomas Numbers 1167M01-M04: Units do not have a blower and require a…

  • Basic 47 & Basic 70 Fume Hoods

    Labconco

    …feet or shallow counter tops 3/16" tempered safety glass counterbalanced sash 10" diameter duct collar Powder-coated 16 gauge steel liner and exterior Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a vapor-proof 100-watt…

  • 8' Protector Echo Filtered Fume Hoods

    Labconco

    …traditional hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 8' Echo Fume Hood

  • RXPert™ Single Filtered Balance Systems

    Labconco

    …provide user protection by keeping powders and particulates contained during hazardous drug manipulation. These powder hoods include a canopy and damper for thimble ducting the enclosure to the outside. All models feature: Patented* design Deep interior of 23.4" or 30.0"…

  • Protector Work Stations

    Labconco

    …pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a front air foil and rear baffle to direct the inflow air across the work area and away from the operator.  Protector Work Stations designed for ducting to the outside are available with or without a…

  • 6' Protector Echo Filtered Fume Hoods

    Labconco

    …traditional hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 6' Echo Fume Hood

  • Fume Hood Exhaust Blowers

    Hemco

    Epoxy coated steel, belt drive, exhaust blowers for canopy hoods based on duct runs under 25ft and no more than 4 elbows. These exhaust blowers are designed to maintain between 80 to 100FPM.

  • CApture™ Portable Fuming System

    Labconco

    …weight 5 lbs. (2.3 kg). Exhaust Connection Kit Allows the Fuming System to exhaust to a remote location, such as out a window or into a nearby fume hood. Includes 10' long, 4" diameter collapsible duct. Shipping weight 1 lb. (0.5 kg). Stainless Steel Shelf Allows…

  • RXPert™ Double Filtered Balance Systems

    Labconco

    …double HEPA filtration to contain airborne particulates and powders, providing user protection during hazardous drug manipulation. No outside ducting is required. All models feature: Patented* design Deep interior of 23.4" or 30.0" depending on the model Ergonomic…

  • Benchtop Stainless Steel Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Paramount® Ductless Enclosures

    Labconco

    For removal of both gaseous and particulate contaminants Paramount® Ductless Enclosures are self-contained work stations (ductless fume hoods) that use carbon filters to rid the laboratory or unsafe concentrations of chemical vapors. Air inside the enclosure passes through filters before…

  • 5' Protector Echo Filtered Fume Hoods

    Labconco

    hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 5' Echo Fume Hood requires a…

  • Flexible Duct Connections

    Labconco

    Reduce vibration between the blower and PVC ductwork. Include two clamps for easy installation.

  • Spiral Tube

    Labconco

    Corrosion-resistant, neoprene-impregnated fiberglass reinforced with steel wire. Include rigid duct connector and two clamps. Because this ductwork is flexible and may conform to various configurations, it is not possible to know the precise equivalent resistance.

  • Purifier Logic+ Class II B2 Biosafety Cabinets

    Labconco

    …filter life remaining and cabinet status. These features combine to provide unparalleled safety. These biosafety cabinets are designed to be hard ducted to the outside. The cabinet provides personnel, product and environmental protection and is suitable for work in biosafety levels 1, 2 and 3. In…

  • Thermoplastic Ducts

    Labconco

    PVC exhaust duct is Type I, unplasticized, schedule 40, lightweight and corrosion-resistant. A Female Duct Coupling is required to join two sections.

  • Flexible Exhaust Duct, 42" length

    Labconco

    42" length of 2" diameter steel-reinforced vinyl duct with two clamps.

  • PVC Blowers

    Labconco

    …housing of unplasticized Type I polyvinyl chloride for complete corrosion protection; inlet and discharge diameters are sized to receive rigid PVC ducting material directly for easy installation; dry powder epoxy-coated base and weather cover provide long life in extreme weather; adjustable sheaves…

  • 5' Protector Pass-Through Laboratory Hoods

    Labconco

    Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Thermoplastic Duct Reducers

    Labconco

    PVC coupling type reducer designed for connecting thermoplastic duct of different diameters with no equivalent resistance.

  • 4' Protector Echo Filtered Fume Hoods

    Labconco

    hoods, has no ducted exhaust requirements Accommodates up to four electrical duplex receptacles and eight services fixtures Available in 37.7" depth and 4', 5', 6' and 8' widths Passes ASHRAE 110-1995 Fume Hood Containment Tests 4' Echo Fume Hood

  • Protector® Airo™ Filtered Fume Hoods

    Labconco

    …Filtered Fume Hood. Labconco has combined its patented* fully-featured, containment- enhancing Protector® Hood design with Erlab’s GreenFumeHood® (GFH) Filtration Technology to deliver a multi-use fume hood that requires no ducting. The Protector Airo Filtered Fume Hood delivers…

  • Ductwork for Protector ClassMate Hoods

    Labconco

    Exhaust adapter for back to back ClassMate Fume Hoods to connect (2) 12" exhaust collar connections to one 12" connection. Constructed of powder-coated steel.

  • Wash Rings

    Labconco

    Wash Ring, wide angle conical spray nozzle, and wash water connection nipple are fabricated into a PVC coupling. For Stainless Steel or PVC Perchloric Acid Hoods. 10" Diameter Flow rate is one gallon per minute at 40 psi. 12" Diameter Flow rate is 0.70 gallons per minute at 20 psi.

  • Fume Adsorbers

    Labconco

    …vapors are trapped in the capillary-like channels of the carbon filter while clean air is recirculated into the laboratory. The Fume Adsorber requires no ducting to the outside and is completely portable. It includes one replaceable six pound (2.7 kg) type AC activated carbon filter. The filter…

  • Fume Hood Fans

    INSTOCK Labs

    … All units standardly feature: Belt driven forward inclined impellers Carbon steel drive shafts FRP belt guards Free fland seals 10" inlet duct transition Galvanized steel mounting frame with vibration isolation pads 2017 INSTOCK Laboratory Furnishings Catalog

  • UniLine Fume Hood Base Cabinets

    Hemco

    Base cabinets built to last! UniLine Fume Hood Base Cabinets are constructed of top grade furniture steel and finished in a chemical resistant powder coated finish meeting or exceeding SEFA 8 recommended practice for laboratory casework. UniLine Base Cabinets set the standard for safety and…

  • Duct Couplings

    Labconco

    PVC Duct Coupling connect two sections of Thermoplastic Duct.

  • Thermoplastic Duct Reducers

    INSTOCK Labs

    PVC coupling type reducers are designed for connecting thermoplastic duct of different diameters. Compare your blower inlet size with your duct size to see if one is necessary. 2017 INSTOCK Laboratory Furnishings Catalog

  • Flexible Duct Connections

    INSTOCK Labs

    This connection reduces vibration between the blower and PVC Superduct pipe. Supplied with two clamps for easy installations. 25' length. 2017 INSTOCK Laboratory Furnishings Catalog

  • Manual Duct Dampers

    INSTOCK Labs

    PVC Superduct pipe fittings allow you to balance airflow. It is highly recommended for use in hood ventilation systems. 2017 INSTOCK Laboratory Furnishings Catalog

  • Duct Couplings, Female/Female

    INSTOCK Labs

    PVC coupling makes connections between two sections of PVC Superduct Pipe quick and easy. 2017 INSTOCK Laboratory Furnishings Catalog

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.