Drying Rack

Drying Rack, Pegboard, Epoxy, Glassware Epoxy pegboards come standard in black, 1" thick material. A stainless steel drip trough (sold seperately) can be easily mounted to the bottom edge to provide excellent draining capacity. Please note: Units do not include a wall attachment and…

Saves glassware from chips and cracks Drain and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of…

…for hanging Hooks for joining together additional racks Rack dimensions: 17.7"(W) x 24.8"(H) x 4.3"(D) (450mm x 630mm x 110mm) Peg Dimensions: 3.7" long x 0.6" diameter (95mm x 15mm) This durable drying system is made from high-impact polystyrene (HIPS) to…

…the rack can be tilted up to 20 degrees for added stability and ease of use. Product Dimensions (L x W x H): 18.5 x 7 x 21 in. Drying rack high impact polystyrene. Expandable fasteners to connect additional racks included and interchangeable removable pegs. This 72 place drying rack is molded…

…rack can be adapted to any apparatus which is to be dried. Available in three different sizes: Draining rack 40x40 cm with rods 60 mm (5x), 100 mm (26x) and extension 150 mm (2x) Draining rack 50x50 cm with rods 60 mm (10x), 100 mm (39x) and extension 150 mm (4x) Draining rack 60x60…

Plastic draining rack excellent for drying tubes and bottles. The back plate has 20 holes into which pegs are tightened. Bottom features a wastewater tray and drain

Drying Rack, Stainless Steel, Glassware Mod-Rack pegboards serve a dual purpose in a modern laboratory. First, they allow you to quickly dry important, and often fragile, equipment in a sanitary manner. Second, our well-crafted pegboards are a safe place to store often used materials so they…

Dimensions: 246 x 105 x 64mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples…

Drying Rack, Stainless Steel, Glassware Mod-Rack pegboards serve a dual purpose in a modern laboratory. First, they allow you to quickly dry important, and often fragile, equipment in a sanitary manner. Second, our well-crafted pegboards are a safe place to store often used materials so they…

Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows…

…Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

These polyproylene racks can conveniently hold inverted tubes for drying and minimize collection or airborne contaminants. Racks can also be used to hold and dry electrophoresis and chromatography plates. Autoclavable. The 96 place rack features an 8 x 12 array of pegs that hold test tubes up to…

Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…

… Space in laboratories is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing labware. All models come with three size and length rugged V-channel pegs that can be moved and repositioned to…

Dimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples…

Drying Rack, Pegboard, Acrylic, Glassware Our acrylic pegboards are made out of 3/4" thick clear acrylic. Pegboards can be supplied with a frosted back to diffuse light, if desired. Pegs are available in white or black and in three different lengths. Bevels can be added at the bottom to pitch…

Eliminates spills Easy to clean Unit is dishwasher safe Plastic grid cushions and protects against breakage and scratches. Grid cuts drying time in half by promoting air circulation. Rack measures 16 1/2” x 13” x 5/8” and weighs 1 lb.

Can be used upright or flat on table, in sink or hung on wall Spot-welded steel wire coated with Neoprene, with removable, galvanized iron drain pan Has 18 nylon-coated pegs 127 mm long x 11 mm o.d., spaced 76 mm apart and 72 pegs 76 mm long x 9.5 mm o.d., spaced 38 mm apart. Pegs…

"Mega Peg" drying boards and accessories. Fabricated of 1/2" polypropylene, these drying racks are perfect for the high volume laboratory. Supplied in two standard sizes but can be fabricated to fit any space requirement. Each board is supplied with the appropriate number of 5"…

Dry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all) hold…

…base for safety Ten slots for placement Perfect for storing clean, used, treated or untreated plates. Wide handles provide a secure grip during transportation. Polypropylene material reduces chipping and cracking. Flat area provided on rack for labeling. Dimensions: 8 x 15 x 9 inches.

…range: room temperature plus 5°C to 300°C APT.line™ preheating chamber technology Forced convection Adjustable exhaust air flap Controller with timer functions 2 chrome-plated racks Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm

…solvent stream is cut off and an air jet is directed into the tubes for drying. Cleaning is equipped with pressure regulator with external adjustment and air pressure gauge for regulation of airflow. Six movable draining racks provide draining excess oil from tubes before use of solvent (air line is…

A versatile revolving rack that can be used to dry or store a variety of sizes of graduated cylinders. It is an easy way to keep a variety of sizes of cylinders at your fingertips. The black vinyl coated wire rack holds up to 25 cylinders of various sizes, but takes up only 20 inches in diameter of…

The BINDER FDL 115 with silicone and dust-free inner chamber, as well as symmetric airflow dries specimens containing solvents and thus this safety drying oven meets all EN 1539 requirements. Important characteristics Temperature range: room temperature plus 10°C to 300°C …

Sturdy steel, A-shaped rack Plates rest on rubber supports Rubber pads prevent sliding Three of the rack’s ten slots are wide enough to hold double plates. Constructed of steel with a baked-on epoxy coating. Minimum width of the plate supported is 6 1/2” (16.5 cm).…

…room temperature plus 5°C to 300°C APT.line™ preheating chamber technology Gravity convection Adjustable exhaust air flap Controller with timer functions 2 chrome-plated racks Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm

…hold slides during evaluation and cleaning These strong, lightweight slide holders are chemical resistant and provide an inexpensive way to dry slides and drain excess fluids from flat surfaces. Angle of slots facilitates clear viewing of desired slide. Beveled edges provide easy access to…

…customized workstation. DS-12 Drain Shelf 12" shelf for drying small tools, cylinders and equipment. Shipped with required support pegs for installation. DB-12 Drain Basket 12" basket for drying smaller tools, cylinders and equipment. Shipped with required support pegs…

…then the rack is positioned to the preferred angle and media allowed to cool and harden. One side is inclined 5° to create a large surface area that is ideal for aerobic cultures. The other side is inclined 20° for a smaller surface area that is ideal for anaerobic cultures and reduces drying out of…

Two-tier rack with thirteen 25mm holes, and six drying pins Solid hardwood construction Polished to minimize damage from spills