Distilling Apparatus

This complete set features high quality borosilicate glass parts and all hardware necessary for simple distillation experiments. Includes: 500ml Round Bottom Borosilicate Flask with Side Tube 300mm Graham Condenser 250ml Erlenmeyer Flask Glass Stopper Support Stand…

A compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. Column is vacuum jacketed. Indents are positioned to cause the vapor to follow a spiral path, adding to the efficiency of the unit. Approximately three theoretical plates at 60mL/hr. Hold up to…

A compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. Column is vacuum jacketed. The indents are positioned to cause the vapor to follow a spiral path. Approximately three theoretical plates at 60mL/hr. Hold up to 1.2mL operating, 0.5mL static.…

A compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. The indents are positioned to cause the vapor to follow a spiral path, adding to the efficiency of the unit. By use of the three-way stopcock, a manifold arrangement is achieved, making it possible…

The high quality laboratory grade Distilling Apparatus is provided with Borosilicate Glass Pieces that feature 24/40 Ground Joints which allow secure fits and ease in assembling the apparatus. The complete kit includes a Kjeldahl Bulb, Graham Condenser with coil for greater cooling surface - 250mm,…

With 10/30 joint for a 25 mm immersion thermometer. All other joints are 14/20. Hose connections project to rear. Round-bottom and pear-shape flasks supplied with complete unit are 25mL capacity. Hose connections on still are size A.

Used for the determination of sulfites in food and related product, this Monier-Williams Sulfites distilling apparatus is made of borosilicate glass and has Standard Taper 24/40 outer and inner joints. The complete unit consists of a special outlet adapter with a double bend, a 300mm long Allihn…

This PYREX® cyanide distilling apparatus is used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation and absorbed in a scrubber containing a sodium hydroxide solution. Tygon® tubing…

Bent angle of 105°, with Standard Taper joints on inlet and outlet ends and inner drip-tip which bypasses vacuum take-off tubulation Has drip-tip at exit end Side-arm accepts 5/16” i.d. flexible tubing Made from Kimax® Brand KG-33 borosilicate glass, which features a low coefficient of…

A general purpose batch distillation assembly with the facility for addition via the Standard Taper PYREX® stopped neck Ideally suited for the batch production of high purity distilled water The flask bottom is flat with a slide delivery tube, terminating in a Standard Taper joint …

Useful for separating higher boiling liquids that require a short pot-to-column distance to prevent excessive condensation. If pot bleed is desired a two-neck flask can be used. Thermometer joint is 10/18 for 9551, 25mm immersion.

Useful for separating higher boiling liquids that require a short pot-to-column distance to prevent excessive condensation. If pot bleed is desired a two-neck flask can be used. Thermometer joint is 10/18 for 9551, 25mm immersion.

…and inexpensive pieces contained in this distilling apparatus are perfect for a student set. The kit contains everything necessary to demonstrate the properties of distillation. A comprehensive booklet is included which explains how the process of distillation is used in industry. The Boiling Flask,…

KIMAX® apparatus used in general purpose distillation and phenol distillation. Flask has a flat bottom and a distillation head with a 19/38 joint Supplied with a Standard Taper stopper Condenser is Graham-style, having a 200 mm jacket with a 19/38 joint at the top only For…

…released as HCN acid from cyanide complexes by means of reflux-distillation and absorbed in a scrubber containing a sodium hydroxide solution. Apparatus includes a reactor head, cold-finger condenser, dispersion tube with coarse porosity frit and two purge tubes. For removing interfering…

Short-path design for microscale application, used with 25mm immersion thermometer, and D27 distillation receiver.

…support block and flask support boards. Designed for testing of Grade No. 2 fuel oil, Grade number 2-D diesel fuel oil, gas oils, and other distillates requiring condenser bath temperatures of up to 140°F (60°C). Equipped with 300W copper immersion condenser heater with stepless electronic…

…addition products. To ensure a complete seal during the analysis, each joint should be clamped Five clamps are supplied with the complete apparatus Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

This distillation set is made from heat-resistant borosilicate glass and held together with rubber stoppers. Includes: 1 Liebig Condenser, 300mm long with a fused inner tube (#30721) 1 Flat Bottom Boiling Flask, 500ml (#FFB500) 1 Erlenmeyer Flask, 500ml (#EF500) 1 Burette Clamp…

Cyanide distillation apparatus used in testing for soluble and insoluble cyanides in water. Apparatus basically conforms to ASTM D-2036 except for modifications involving Ace-Threds and larger joints. Also available with threaded adapter to connect still head to trap. PTFE ferrules are supplied in…

Alginates assay distillation system similar to the one described in US Pharmacopeia 2006, chapter 311. The system includes a metering valve with flow meter tube set, 250mL flask and mantle, reflux condenser with u-tube and hose connection adapters and a 250mL gas washing bottle. 5/16 in ID Vinyl…

Used for volatile fatty acid test; ASTM D-1076. Fabricated from standard wall tubing throughout. Hose connections on still are size D; on condenser, size C.

Apparatus for converting simple and most complex cyanides into HCN and for from most interferences before measuring by titration or colorimetric analysis examination of industrial wastes and other water. Method is described in Standard the Examination of Water and Wastewater. Fourteenth Edition,…

Used in testing for soluble and insoluble cyanides in water. Basically conforms to ASTM D 2036 (excluding modifications). Flask is 1L with 24/40 joint and #7 Ace-Thred permitting variable depth positioning of fill tube which has a float valve for added protection against boil back. Jacketed still…

Generally used for the determination of ammonia in water. Joints are standard taper 24/40.

Used for the removal of solvents or other volatiles by vacuum distillation at ambient temperature. When used with Schlenk reaction Vessel, No. 7756, the trap prevents excessive loss of solution in the event of a bump. The distillate is collected in a No. 9477 pear shaped flask or other suitable…

Used for methoxy determination as described in U.S. Pharmacopeia, 1995, page 1742. Complete consists of 20 mL boiling flask with 14/20 joint and a capillary side arm, scrubber trap column with 14/20 inner and 35/20 socket, and an absorption tube with 35/20 ball joint and a 2mm bore glass stopcock.…

Designed for small quantities where holdup between flask and receiver must be minimized but where it is also desired to measure vapor temperature with an accuracy compared to large setups. Improved thermometer sensitivity. Physical carry-over is practi

Designed for small quantities where holdup between flask and receiver must be minimized, but where it is also desired to measure vapor temperature with the accuracy of larger setups. Still body is available with or without vacuum jacket and with vigreu

A high quality Distillation Apparatus, supplied with heat resistant borosilicate Flask and Graham Condenser. The flask is fitted with a 24/40 ground glass penny stopper and the extension arm is fitted to the condenser with a 19/38 ground glass fitting. The kit is supplied with a support stand, buret…

Apparatus for use in distillation of material such as THF or ether. Storage reservoir has a capacity of 125mL or 500mL. Extremely efficient cold finger coil condenser has a section that is immersed into the distillate. This assures that the distillate is at room temperature instead of the…

Used for limit test for arsenic as described in European Pharmacopeia, 1997, page 51. Complete consists of 125mL conical flask with 24/40 joint, a capillary chimney with a pulled tip below 24/40 joint at bottom, #5 O-Ring joint at top with hooks for 3/4" springs, and an adapter tube with #5 O-Ring…