Distilled Water Dispenser

Compare Tool

Select up to 3 products

Distilled Water Dispenser
1 - 32 of 74
Sort
View
Show
  • Dispensette® S Fixed-Volume Bottletop Dispensers

    BrandTech®

    The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

  • Dispensette® S Digital Bottletop Dispensers

    BrandTech®

    The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

  • Dispensette® S Analog-Adjustable Bottletop Dispensers

    BrandTech®

    The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

  • Dispensette® S Organic Analog-Adjustable Bottletop Dispensers

    BrandTech®

    The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

  • Dispensette® S Organic Digital Bottletop Dispensers

    BrandTech®

    The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

  • Dispensette® S Trace Analysis Bottletop Dispensers

    BrandTech®

    …procedure, metal ions are typically in the low PPB or even PPT range. The platinum-iridium model is also suitable for the dispensing of hydrofluoric acid. The dispensing cartridge is replaceable Instruments feature a sliding pointer, well suited for rapid volume changes from one end of the range…

  • Dispensette® S Organic Fixed-Volume Bottletop Dispensers

    BrandTech®

    The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

  • Dispensing Jug

    Bel-Art - SP Scienceware

    Dispense Directly from 5 Gallon Graduated Jug without Lifting or Moving Use this 20 liter (5 gallon) jug with molded-in gradations (in gallons) to store and dispense common solutions, including janitorial cleaners, deionized / distilled water, or other aqueous liquids. Gasketed and…

  • WaterPro® BT™ Water Purification System

    Labconco

    …Feature: Thermoplastic housing with removable thermoplastic cover. Dispensing valve that dispenses >0.5 liter per minute Type I water by pressing the dispense button. 6 liter capacity RO-purified water storage tank. Feedwater inlet tubing, 7' long, with 1/2" OD Male…

  • Direct-Q® 3 Remote Water Purification System

    MilliporeSigma

    …endocrine disruptors or volatile organic compounds. The system's versatile remote dispenser helps you stay focused on your work by providing ultrapure water delivery where you need it. The remote dispenser can be placed up to two meters from the Direct-Q® system, and are available in…

  • Barnstead™ Smart2Pure™ Pro Water Purification System

    Thermo Scientific

    …system which converts tap water to into ASTM Type 1. The Smart2Pure Pro UV/UF 16 LPH offers the choice of a 30 L or 60 L reservoir for customizable storage capacity and ability to dispense both ASTM Type 1 and Type II water. Lasting economy: Water purification progresses through…

  • Sapphire Bottle Top Dispensers

    LH Technologies

    …removes the air from the dispenser without wasting any reagent. Dilution/Rinsing/Second Liquid Dispensing Knob A – Open, Knob B – Open. In this mode the liquid from a second source can be dispensed into the receiver. The second liquid can be distilled water, thus allowing the…

  • High-Density Polyethylene Carboys

    Thermo Scientific Nalgene

    … Molded-in graduations Built-in shoulder loops have attached handle Space saving rectangular shape Excellent for collecting and dispensing distilled water Tough, rigid and translucent Dimensions: 9 liter carboys measure 8 1/2” x 5 3/4” x 14”; 20 liter carboys measure…

  • 40L Water Storage Tanks for Fi-Streem III Glass Stills

    LabStrong

    …kit allows for distribution of distilled product water to a glassware washer, point of use deionization (DI) system or any system requiring distilled water as a feed source, while leaving the spigot at the front of the tank free to manually draw water from at any time. Product Features:…

  • Aspirator Bottles

    United Scientific Supplies

    These lightweight, autoclavable aspirator bottles are made from polypropylene and can be used for dispensing distilled water and other laboratory solutions. The leak-proof spigot screwed to the bottle requires only a half turn to open or close. Polyethylene cap and stopcock should be removed before…

  • Nutrient Broth

    MP Biomedicals

    Dissolve 8 g of the medium in a liter of deionized or distilled water. Dispense as desired and sterilize at 121°C (15 lbs. of pressure) for 15 minutes. Nutrient Broth is used in many laboratory procedures as is, or with added indicators, carbohydrates, organic liquids, salts, etc. This medium…

  • Brain Heart Infusion Broth

    HiMedia

    …of the medium whereas sodium chloride maintains the osmotic equilibrium of the medium. Directions: Suspend 37 grams in 1000 ml distilled water. Dispense into bottles or tubes and sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes. For best results, the medium should be used…

  • Whatman Specialized Test Papers

    GE Healthcare

    …and in industry. Lead Acetate Test Paper Used for detecting hydrogen sulfide, this rapid qualitative test paper when wetted with distilled water can detect as little as 5 ppm of H?S in the atmosphere or in a gas stream. Hydrogen peroxide can be detected with this paper by preblackening…

  • HDPE Lowboys With Spigots

    Thermo Scientific Nalgene

    …refrigerators Leakproof and stackable Patented Convenient integral handgrip for safe, easy transport Ideal for storing and dispensing reagents, titrants, distilled water Tolerates strong acids and bases Not recommended for use with most organic solvents Spigot closure is included. Closure…

  • SOB Broth

    RPI (Research Products International)

    …medium for use in the preparation and transformation of competent cells. Add 28 grams of Broth in 1 liter of distilled water. Heat gently to dissolve the medium completely. Dispense in tubes and sterilize by autoclaving for 15 minutes. Ingredients: Casein Enzymic Hydrolysate: 20 g/l …

  • Carboy, with spigot, Polypropylene

    Bel-Art - SP Scienceware

    …and are USP Class VI certified for the demands of the biotechnology and pharmaceutical industries. Ideal for storing and dispensing large batches of culture media, distilled water and other solutions, they have excellent chemical resistance and large handles that help with transport. All components…

  • Litmus Milk

    HiMedia

    …obtained in this medium are not specific and further tests must be carried out. Directions: Suspend 101 grams in 1000 ml distilled water, agitating continuously. Dispense 10 ml amounts into 15 x 150 mm tubes and sterilize by autoclaving at 15 lbs pressure (121°C) for 5 minutes. AVOID OVERHEATING.

  • Nutrient Broth

    HiMedia

    …for the growth of bacteria. Sodium chloride maintains the osmotic equilibrium of the medium. Directions: Suspend 13 grams in 1000 ml distilled water. Heat, if necessary, to dissolve the medium completely. Dispense as desired and sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes.

  • Stuart Transport Medium without Methylene Blue

    HiMedia

    …agent and also maintains osmotic equilibrium in the medium. Directions: Suspend 14 grams in 1000 ml double distilled water. Heat to boiling to dissolve the medium completely. Dispense into tubes with screw caps to give a depth of approximately 7 cm. Sterilize by autoclaving at 15 lbs pressure…

  • Elliker Broth (Lactobacilli Broth)

    HiMedia

    …effect on gram-negative bacteria and moulds, without affecting the growth of lactobacilli. Directions: Suspend 48.5 grams in 1000 ml distilled water. Heat if necessary to dissolve the medium completely. Dispense as desired. Sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes.

  • Mueller Hinton Broth

    HiMedia

    …recommended by CLSI to give the correct MIC values withaminoglycosides and Pseudomonas aeruginosa (3). Directions: Suspend 21 grams in 1000 ml distilled water. Heat if necessary to dissolve the medium completely. Dispense and sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes.

  • Synthetic Broth, AOAC (Wright and Mundy Broth)

    HiMedia

    …subcultures used for the dilutions of disinfectant under test. Directions: Suspend 16.9 grams in 1000 ml distilled water. Heat if necessary to dissolve the medium completely. Dispense 10 ml amounts in 20x150 mm culture tubes and sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes.…

  • Reinforced Clostridial Broth without Agar

    HiMedia

    …These media can be made selective by addition of 15-20 mg Polymyxin B per litre of media (1). Directions: Suspend 37.5 grams in 1000 ml distilled water. Heat if necessary to dissolve the medium completely. Dispense as desired. Sterilize by autoclaving at 10 lbs pressure (115°C) for 15 minutes.

  • Nutrient Agar

    HiMedia

    …Sodium chloride maintains the osmotic equilibrium of the medium. Directions: Suspend 28 grams in 1000 ml distilled water. Heat to boiling to dissolve the medium completely. Dispense as desired and sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes. Mix well before pouring.

  • R2A Broth

    HiMedia

    …media allow the growth of stressed and chlorine tolerant bacteria present in treated waters. Directions: Suspend 3.12 grams in 1000 ml distilled water. Heat if necessary to dissolve the medium completely. Dispense into tubes. Sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes. DO…

  • Pfizer Selective Enterococcus Agar

    HiMedia

    …Enterococcus Agar is better used as selective primary medium (5). Directions: Suspend 57.75 grams in 1000 ml distilled water. Heat to boiling to dissolve the medium completely. Dispense as desired and sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes. Mix well and pour into Petri…

  • MacConkey Broth (MacC)

    HiMedia

    …indicates pressure of coliforms. Directions: Suspend 34.51 grams of dehydrated medium in 1000 ml purified/ distilled water. Heat to boiling to dissolve the medium completely. Dispense into test tubes with inverted Durham tubes. Sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.