Distillation Thermometer

Compare Tool

Select up to 3 products

Distillation Thermometer
1 - 32 of 63
Sort
View
Show

United Sci Supplies

  • ASTM Thermometers, Solvents Distillation

    Thermco

  • ASTM Thermometers, High Distillation

    Thermco

  • 75° Connecting Distillation Adapters with BEVEL-SEAL™

    DWK Life Sciences (Kimble)

    Used in distillation assemblies where adjustable immersion depth of the thermometer is desired. Threaded top BEVEL-SEAL™ connection for plain stem thermometers Vacuum-tight seal is achieved with the open top compression cap and FKM o-ring BEVEL-SEAL™ cap 410119-1307 is…

  • SYNTHWARE Distilling Heads for 76mm Thermometers

    Kemtech America

    Thermometer joint is 10/18 for 76mm immersion thermometer. Side arm is at 75° angle.

  • Distilling Apparatus

    Ace Glass

    …60mL/hr. Hold up to 1.2mL operating, 0.5mL static. Receiver capacity is 15mL. By use of the three-way stopcocks, a manifold arrangement is achieved, making it possible to remove receivers without disturbing the equilibrium of the system. 10/30 thermometer joints are for 25 mm immersion thermometers.

  • SYNTHWARE Microscale Distillation Apparatus

    Kemtech America

    Short-path design for microscale application, used with 25mm immersion thermometer, and D27 distillation receiver.

  • SYNTHWARE Short Path Vacuum Jacketed Distillation Apparatus

    Kemtech America

    …design for more efficiency. When a thermometer is inserted in the top of this apparatus, the bulb and stem serve as column packing. The close coupled condenser and vacuum connection offer and extremely short condensate travel path. Used with 25mm immersion thermometer, and D27 distillation receiver.

  • Distillation Apparatus

    Ace Glass

    With 10/30 joint for a 25 mm immersion thermometer. All other joints are 14/20. Hose connections project to rear. Round-bottom and pear-shape flasks supplied with complete unit are 25mL capacity. Hose connections on still are size A.

  • Synthware Distillation Adapters, Vigreux

    Kemtech America

    Synthware Vigreux distillation connecting adapter. Indenstations in lower section improve liquid/vapor contact. The standard taper top outer joint accomodates a 76mm immersion thermometer. Bottom and side joints are standard taper inner joints.

  • Distilling Tube Connector

    Corning

    Standard Taper 10/30 thermometer opening, distilling, three-way, Standard Taper joints Sidearm is at an angle approximately 75° from the lower part of the vertical tube The joint on the sidearm is at an angle approximately 105° from the sidearm The sidearm and lower tube are…

  • SYNTHWARE Large Scale Distillation Head

    Kemtech America

    One-piece design. With 10/18 thermometer joint and high efficiency cooling jacket. To be used with 50mm immersion thermometer with 10/18 joint.

  • Distilling Apparatus

    Ace Glass

    …Approximately three theoretical plates at 60mL/hr. Hold up to 1.2mL operating, 0.5mL static. Receiver capacity is 15mL. Three-way stopcocks achieve manifold arrangement making it possible to remove receivers without disturbing the euilibrium. 10/30 thermometer joints for 25mm immersion thermometers.

  • SYNTHWARE Vacuum Jacketed Distilling Heads

    Kemtech America

    Distilling Head, Vacuum Jacketed Thermometer Joint: 10/18 Joints: 14/20 or 19/22 available For use with 25mm immersion thermometer.

  • Flask Distilling 125mL.Pk 6

    Corning

    …duty PYREX® distilling flasks are suitable for microchemical applications. The sidearm is located approximately 137mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Adaptable for use with thermometers calibrated for 76mm…

  • Distillation Head, Vacuum Type

    Ace Glass

    Vacuum distillation head featuring glass or PTFE stopcock plugs which allow the receiver to be removed from the head without disturbing the refluxing solvent. All joints are 24/40 with the exception of a 10/18 thermometer joint which will accept our 5028-24 adapter and 6.4mm thermometers such as our…

  • Adapter, Distilling

    Ace Glass

    For connecting distilling column with vertical condensers. Top joint 10/30 is for 76 mm immersion thermometer. Side arm at 75 degree , vertical side arm 17.8cm from center tube.

  • ASTM Thermometers, Low Distillation

    Thermco

  • SYNTHWARE Short Path Vaccum Jacketed Distillation Apparatus

    Kemtech America

    Used with 25mm immersion thermometer, and D27 distillation receiver.

  • Synthware Distillation Adapters, Vacuum Jacketed

    Kemtech America

    Can be used as a distilling head to connect a condenser to the top of the distillation column. The 10/18 top joint accomadates a 76mm immersion thermometer.

  • Distilling Apparatus, High Boiling

    Ace Glass

    Useful for separating higher boiling liquids that require a short pot-to-column distance to prevent excessive condensation. If pot bleed is desired a two-neck flask can be used. Thermometer joint is 10/18 for 9551, 25mm immersion.

  • Synthware Distillation Adapters with Threaded Thermometer Ports

    Kemtech America

    Synthware distillation adapter with threaded thermometer port. The threaded port will accommodate a 6-7.5mm O.D. plain thermometer. The adapter has standard taper top outer joint and inner joints for the bottom and side. All joints are the same size. 

  • Short Path Distillation Head

    United Scientific Supplies

    Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port. Distillation head is manufactured from high quality 3.3 borosilicate glass and features a condenser coil and three 1/4" hose nozzles, two for condenser and one for vacuum.

  • SYNTHWARE Jacketed Micro Vigreux Distillation Head

    Kemtech America

    Distillation Head, Vigreux, Jacketed Thermometer Joint: 10/18 Joints: 14/20, use with 25mm immersion thermometer

  • Distillation Apparatus, Short Path

    Ace Glass

    Designed for small quantities where holdup between flask and receiver must be minimized but where it is also desired to measure vapor temperature with an accuracy compared to large setups. Improved thermometer sensitivity. Physical carry-over is practi

  • Synthware Distillation Adapters

    Kemtech America

    Synthware distillation adapter with a 10/18 standard taper outer joint for a 76mm immersion thermometer. The adapter has a standard taper top outer joint and inner joints for the bottom and side.

  • SYNTHWARE Micro Vigreux Distillation Head

    Kemtech America

    Distillation head with condenser sealed to a Vigreux column. Vacuum adapter has an outer joint and accepts a distribution adapter (D201414). To be used with a 25mm immersion thermometer.

  • SYNTHWARE Vacuum Jacketed Vigreux Distillation Heads

    Kemtech America

    Vacuum jacketed Vigreux distillation head having a sealed on condenser, braced for strength. Vacuum adapter has an inner joint and a sealed in drip tip. To be used with a 25mm immersion thermometer .

  • Frio-Temp® Precision Incubator Thermometer

    H-B Instrument

    … Ideal for chemical industry, petro chemistry, pharmaceutical, medical, cosmetic, producers of chemicals, university, dairies, breweries, distillers, beer cellars, refrigeration house, hot houses, scientific institutes, blood banks, refrigeration/freezer/incubator/oven equipment producers and…

  • SYNTHWARE Microscale Vigreux Distilling Heads

    Kemtech America

    With Vigreux Indentations, used with 25mm immersion thermometer, and D27 distillation receiver.

  • SYNTHWARE Short Path Distilling Head with 24/40 Joint

    Kemtech America

    One-piece design for easy set-up. For the best result, use D272440 distillation receiver. To be used with 25mm immersion thermometer.

  • Distilling Head

    Ace Glass

    With condenser jacket on side arm. Thermometer joint is 10/30 (see 8315 for thermometer listing). Side arm is at a 75 degree angle.

  • Distilling Head

    Ace Glass

    With finger type condenser and 0-3 mm PTFE stopcock plug with PTFE ring seals for reflux control. The seals prevent O-Ring exposure to corrosive liquids and are backed up by a FETFE O-Ring. Thermometer joint is 10/30, all others are 14/20.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.